I phone activation problem!!! PLEASE ASSIST

I have an Iphone 5s that i bought from US with NO PLAN from Best buy. The mobile was working with my Greek sim card (cause im from Greece). i had an accident and the phone took water so i went to apple store in Germany and i paid 250euro for the replacement of a US phone. Now the phone that they gave me is not working with any provider cause they told me in apple that my first phone was locked from verizon and also this one is locked now again. What can i do? i dont have any account to activate it thought the internet or something? can someone from the service team send me a email etc? please! i have already waste more than one month to talk with apple without any results!!

lol...how is it possible people to give such answers to customers??
I just called them and they told me to go to a "pc store" of my choice and ask them to unlock the mobile for me.
But i contacted apple regarding this and they told me that i should just go and jailbreak the mobile. Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…
What can i say???

Similar Messages

  • Weblogic GC Problem - Please assist

    Hi,
    I am working on WebLogic(for the first time) with a sun JVM on a 8 CPU solaris machine, we have set the GC algorithm as,
    "-Xms2048m -Xmx2048m -XX:NewSize=576m -XX:MaxNewSize=576m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:SurvivorRatio=8 -Xverify:none -verbose:gc -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+PrintTenuringDistribution -XX:+UseParallelGC "
    The problem is The FULL GC takes consistently between 15 - 20 sec, firstly is that a concern?
    We see that the heap is used up to 1.9 GB before it GC's
    The CPU Utilzation on box is not high below 40% on an average.
    Is using the "Concurrent Low Pause Collector" a good option in this case?
    Please assist.
    Thanks in advance.
    Following GC trace,
    4028.217: [GC 1425000K->1003932K(2012352K), 0.4191734 secs]
    4028.637: [Full GC[Unloading class sun.reflect.GeneratedMethodAccessor655]
    [Unloading class jsp_servlet._web_45_inf._apcwp._ptrck._jsp.__ptstatementpdf]
    [Unloading class sun.reflect.GeneratedMethodAccessor1726]
    [Unloading class jsp_servlet._web_45_inf._apfa._opnac._jsp.__ocainput]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._hkcareer._jsp.__main]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._hkcareer._jsp.__job]
    [Unloading class jsp_servlet._web_45_inf._apcwp._ptrck._jsp.__ptstatement]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor290]
    [Unloading class sun.reflect.GeneratedMethodAccessor1725]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor356]
    [Unloading class sun.reflect.GeneratedMethodAccessor2253]
    [Unloading class sun.reflect.GeneratedMethodAccessor653]
    [Unloading class jsp_servlet._web_45_inf._jba._common._jsp.__cantdo]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor357]
    [Unloading class jsp_servlet._web_45_inf._apeba._ebrk_reg._rsp._jsp.__screen100]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor355]
    [Unloading class jsp_servlet._web_45_inf._apcwp._myprf._jsp.__profilesummary]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor323]
    [Unloading class jsp_servlet._web_45_inf._jba._ada._jsp.__adaprintfriendly]
    [Unloading class sun.reflect.GeneratedMethodAccessor654]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor335]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._itvisa._jsp.__itvisaempdet]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._hkcareer._jsp.__generic]
    [Unloading class sun.reflect.GeneratedMethodAccessor652]
    [Unloading class sun.reflect.GeneratedMethodAccessor1966]
    [Unloading class jsp_servlet._web_45_inf._aptc._fxrates._jsp.__fxrateview]
    [Unloading class sun.reflect.GeneratedMethodAccessor2252]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._itvisa._jsp.__dummy]
    [Unloading class jsp_servlet._web_45_inf._jso._uidn._jsp.__successcinpin]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._hkcareer._jsp.__service]
    [Unloading class jsp_servlet._web_45_inf._apfa._hkgcb._hkcareer._jsp.__job_list_category_unit]
    [Unloading class jsp_servlet._web_45_inf._aptc._fxrates._jsp.__calculate]
    [Unloading class jsp_servlet._web_45_inf._jba._scdp._jsp.__displaynopayeeinlistscreen]
    1003932K->862215K(2015232K), 15.3721435 secs]

    I am guessing from your question that you are concerned about the full GC pauses.
    1.5.0_06 onwards there is a parallel old gc option available -XX:+UseParallelOldGC
    which can help on an 8-way. I'd expect (much handwaving and guessing here)
    that your full GC pauses might reduce from the current 15 sec range to the 2 second
    range.
    The concurrent GC would also help, albeit might require a bit of tuning to get
    right -XX:+UseConcurrentMarkSweepGC, available since 1.4.2, and made
    much more efficient and scalable in 5.0 and 6.0.
    For tuning guidance, look at the tuning guides and white papers available
    off of http://java.sun.com/docs/hotspot ,
    especially http://java.sun.com/docs/hotspot/gc5.0/gc_tuning_5.html
    and the associated FAQ (at the end of the tuning guide referenced above).

  • I am having activation problem please guide me

    i am having activation problem and the error is repeating again and again

    Read https://discussions.apple.com/thread/4868797?start=0&tstart=
    Has your phone been jailbroken?

  • HT1918 hello guys,my I5 got stole on the 27 July...the insurance paid out and i got a new apple phone.I am currently trying to install itunes on my phone but im not winning.i can only access itunes on my pc,but i want it on my phone.May you please assist

    hello guys.I lost my I5 on the 27 July...the insurance paid out then i got a new phone.same model.
    i am currently tryin to install itunes on my phone,but im not winning.i can only access itunes on my pc but i want on my phone.
    may you please assisst me get itunes on my phone please.

    You don't install iTunes on your phone. iTunes is a program that runs on your computer. As RG asked, please explain more clearly what it is you are trying to accomplish.
    Regards.

  • Iphone activation problem, please help me

    Hello, I have a problem with the iPhone 3GS and you can not turn on, please help me, thanks

    Previous thread info:
    TeeKnows
    This solved my questionRe: Hello, I have a problem with the iPhone 3GS and you can not turn on, please help me, thanks 
    Jul 24, 2013 6:40 AM (in response to samy andrey)
    A couple of weeks ago you postedhttps://discussions.apple.com/message/22397885#22397885
    Sounds like your phone was locked and perhaps had it jailbroken or unlocked and now your device is not working.  Is this correct?

  • Phone charging problems please help!

    This morning my phone was charging fine until I got to class and tried to charge it and it wouldn't work. Now it only charges when it is off but it doesn't die fast. Please help. This phone is a month old so it's brand new.

    Hello Apalmucci23,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone is not charging properly, please follow the steps in the article linked to below.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Remote Site with its own CUCM Sub#2 and Router network failed and the site didnt keep its phones active, need some assistance

    I have a Pub and 2 Sub's.  Sub #1 is with the Pub, at the main site it is our TFTP server, Sub #2 is at a remote site with about 100 users along with a router and 2 PRI's for outbound calls.  We had a network failure between the main site and the remote site and all phone lost their registration with the system until we were able to get the network back up.   Currently the network is up in a crippled state on a 1 T-1 link while we troubleshoot the bigger issue with our 6mb pipe, however Sub #2 and its associated router arent talking with the PUB or other Sub.  I'm still getting alerts every 30 minutes stating they are the server is down.  I'm sure once the network is corrected this will bring everything back on line.  My question is how can I prevent in this in the future.  I need this site to be stand alone if the network goes down again.  I was told by our vendor that if we had a subscriber at each site then we would need SRST licensing. I know something needs to be configured to make it all work, I'm just not sure what.

    I already have a group at the site but it includes both the Pub and Sub from the main site as well as the Sub from the remote site.  I would only have to remove the Sub from the main site, problem is I currently only have 1 TFTP server it runs on SUB #1, should I make SUB#2 a TFTP server as well and the phones are setup for DHCP at the main site, I'm going to need to have a DHCP server setup at the remote site as well. Correct?

  • Adobe Air problem - Please assist?

    4 days ago on start-up I had a message that update was required for Adobe Air so I let it install.  Yesterday I noted my websites were missing graphics, videos on You tube not playing etc,  so I restarted computer and had message on start up re ADOBE AIR saying "The installation of this application is damaged - Try reinstalling or contacting publisher for help".
    As the latter is not an existing option as they say "no help with Air just look at forums for assistance"  this very non technical pensioner is asking for help as I have tried to do what I know by uninstalling and reinstalling THREE times now and still het the message and when I try to get into google it now tells me my profile cannot be used it belongs to a newer version - dont have a clue what I can do for this so any simple advice would be appreciated. 
    To be honest I dont even know if putting this is the right place but nothing anywhere seems to relate to problems with Air.  If I should be asking elsewhere perhaps somebody could point me in that direction as would hate a major problem as because of disability my computer my lifeline.
    Thank you.

    Thank you - apologies for delay with my health I have up and down days and the bad ones have my fingers refuse to behave on here.   I have to have Adobe Air installed for our BBC catch up TV programme BBC I Player The other day on switch on i had a message that adobe air needed to load a new version which is v  3.30.3650 and so i set it to run,  then 2 days later I start getting the message above that the application is damaged so i take it off and re-install.  while it was off I checked my bbc i player app and found the videos were pixelating then when I reinstalled the pixelating had stopped.  Im operating a fairly new desktop vaio on windows 7.  I have taken the system back up to 3 weeks now way before the air update when the problem started but its still happening, telling me its damaged, remove and re-install I feel like Im in Groundhog Day every morning!
    So anyone who can help would be like an angel.  Thanks

  • HT201270 i can not use wifi always says unable to connect what would be the problem please assist me.

    i can not connect to wifi or celluer what would be the problem with my i phone 5

    Hi chege,
    If you are having issues establishing a connection to either Wi-Fi or cellular with your iPhone 5, you may find the following articles useful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    Brenden

  • I phone activation problem

    I purchased an i phone 4 last night. I have MAC operating system Tiger. I am unable to download itunes 10 with operating system I am getting the message Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5. What do I need to do to fix this problem?

    Update your Mac OS.
    The REQUIREMENTS are printed on the box the iphone came in and the website:
    Mac system requirements
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.1 or later (free download fromwww.itunes.com/download)
    iTunes Store account
    Internet access"
    http://www.apple.com/iphone/specs.html

  • Download Problem, please assist.

    OK, so when I download a file off of the internet, what will happen is that the internet connection will go out. Then after fixing the connection, i will hit resume on the download and it will say: "you do not have permission to access the requested file". What should I do?

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • 3 problems: please assist

    problem 1: I used to be able to command-select multiple images, drag a keyword to one of them, and have that keyword apply automatically to all images selected. Now, that doesn't work. The keyword (dragged from the HUD) only applies to the image to which it's dragged.
    Any thoughts? Could I have changed a preference or something that affects this behavior? Anyone else having this issue?
    problem 2: I have several smart albums. some of them are fast(er), returning the images. This has nothing to do w/ the number of images or size of the images (that was the first thing that I tested). Rather, it appears to be random: some of the smart galleries open quickly and display all images quickly; others open really, really slowly, and it takes 30 seconds or more for all images to display.
    problem 3: when I click on the magnifying glass next to a smart album (to change or modify the criteria), the search hud box doesn't appear for a long, time. This is a huge problem: I don't know if you are supposed to hold the mouse button down, or what. Often that search hud appears and then immediately disappears. I click again on the glass/search icon, and nothing happens, again. Have you found this to be fast? Is it only on my system that it's really slow?
    Would appreciate any useful feedback.

    problem 1 i did this myself. you have probably toggled the Primary Only button (rightmost of the group of 5 display controls on the lower left of the control bar).
    can't help with the others.

  • I get a (-50) error when wanting to access the application store from my PC. There is no parental block on my Kaspersky security. Please assist

    I get an error (-50) when trying to access the app store on my desktop PC. I have no kaspersky parental blocks active. Please assist!!

    Try Here  >  http://support.apple.com/kb/TS1583
    And See this Discussion...
    https://discussions.apple.com/thread/4204776?start=0&tstart=0

  • HT4335 i have update my iphone 3gs ios 4.1 to 6.1.3 but at the end activation problem occur and try again to activate in few minutes.so please help and what should i do.......................

    i have update my iphone 3gs ios 4.1 to 6.1.3 but at the end activation problem occur
    the error is could not activate iphone try again so please help me to resolve this problem.
    Thank You......

    Odds are your phone was hacked to illegally unlock it.

  • I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.

Maybe you are looking for