I phone cable is not detecting on any of my laptop ports or on the external charger
Hi,
I bought my I phone 5 around 3 months back and it was perfect till it stopped charging and as a result the cable is not being detected on my laptop or the external charger... Any suggestions?
Either the cable is bad and needs to be replaced, or there is a problem with the iPhone.
Do you have access to another cable that is known good - used by a friend, family member, neighbor, or someone you work with to rule in or out a problem with the existing cable?
If determined to be a problem with the existing cable, all package contents included with the iPhone are under the iPhone's one year warranty.
Similar Messages
-
After installing 10.9.3 computer won't recognize Canon SD 1200 IS camera: get message "a camera was not detected". Any suggestions?
I have an older Kodak which they have stopped supporting and I have to take out the SD card and put it in the card slot to download pictures. I read other threads where this solved similar problems for others. Some have a separate card reader but I just use the one on my imac. Wish it was more convienent to get to it though.
-
I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!
Hi, M_ghaderi.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
Is there any way to delete text messages from the external screen of an LG EnV3?
The internal screen of my phone doesn't work, so I've been texting from the external key pad. But my inbox has gotten full and I can't receive texts anymore. Is there any way to delete texts using only the external screen of the EnV3?
It was awhile ago and I'm not totally sure, but I think this was discussed and the conclusion was that you can't delete texts using the external screen of the Env3. **Edit (Found one thread: http://community.vzw.com/t5/Messaging-Text-Picture-IM-etc/No-option-to-delete-text-messages-from-front-of-LG-enV3/m-p/43042#M1684 ) It came up in one other thread that I could find and the solution was to use the internal, and similar steps were given - the only difference was using the OK for Menu and #2 for Messages, rather than the left soft key for Messages. vWhatever works...
What you CAN do, is open the flip, left soft key (which is the Messages menu), and there are several options - these are the text messaging ones -
1. New Message
2. Inbox (#)
3. Sent (#)
4 Drafts (#)
Press the right soft key (options) and your choices are:
1.Erase Inbox
2.Erase Sent
3.Erase Drafts
4.Erase All
If you choose Erase All, then OK - it will erase all except unread messages, and locked messages. If you choose any of the numbers, then hit OK, it will erase ALL in that category, read or not, so I would choose Option 4 to erase all but the unread.
HTH, and post back if you have further questions... -
Phone USB disconnect not detected
On my one PC, PC Suite does not detect when I disconnect my E51 phone from the USB cable in PC Sync mode.
This one happens on this specific PC, so it must be a setup problem there.
I am running PC suite 6.85.14.1 on WinXP SP2 patched up to date. No problem on another box with same motherboard and software using the same phone.
If I connect in data transfer mode, I use the "safely remove hardware" function of WinXP before I disconnect and all is fine. This is not available in PC Suite mode.
If I unplug the cable from the phone in PC suite mode, PC Suite does not detect that the phone is disconnected, no matter how long I wait.
After this, the whole USB system seems to be confused. No other USB devices are detected when plugged into any other USB port. After reboot all is fine again.
I guess this is a Windows problem rather than a PC suite problem.
Any idea what is going wrong and how to correct this?i had other similar problem with usb devices, maybe when we use more usb devices could be a conflict on system, does exist a tool that clean up all old usb connection?
bye. -
USB FLASH DRIVE v155w Not detecting in any computer.
I purchased HP USB FLASH DRIVE from UNITED COMPUTERS, SECUNDERABAD, AP. on 11/dec/2009, i was a working great till i have inserted it in one of my office computer on 4/mar/2010, i dont know wat happened, since then it is not been detected by any other computer.
1. can i know wat could be the problem.
2. if it is gone how do i replace it.
3. can i know the address of HP service centre in Hyderabad, Andhra Pradesh.
Please do the needfull.Sir
My Hp 4 GB V155W Pen drive have not recogenised in my all computers.. it has been very costly for me. my all costly data is in... what can i do plz say me..... -
i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests -
Whenever I try to download a couple different songs it will go through the downloading process on my phone but when I look at my song on my phone it's not there and its not the grey problem either. I've tried downloading it on my phone and iTunes. Please help!!!!!!
Try restoring the iPod to factory defaults/new iPod. If still probem then it apears that the drop caused hardware damage to your iPod. An appointment at the Genius Bar of an apple store is in order.
-
My IPhone broke yet again due to "known issues", so I am back to an android. But, I cannot text anyone who has an IPhone, had this issue previously and Apple nor my carrier helped out. I have removed my number on Apple.com, as told by my carrier which doesn't help. Also, the IPhone did a factory reset by itself and cannot get past the plug in with itunes screen, and the phone will not stay on when plug it into a computer.
You need to immediately change the password for the Apple ID, for starters. If have iCloud and Find My iphone enabled on the device you can remotely wipe the device. If you do not then there is nothing you can do except change the password for the account.
-
Hi I bought an I Pad Gen1, used, with no accessories, will my I Phone 3 charger, wall and auto work with it or do I need to buy another? Have not received it yet( ebay).Please advise. Thank you.
Your iPhone charger is 5W, whereas the iPad 1 charger is 10W. The iPhone charger will work, but the charge time will be more than double. If you buy a new charger, get the iPad 4 charger which is 12W. It will charge faster than the 10W charger.
FYI
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
My printer says print cartridge(s) missing or not detected. I have a HP Photosmart C4200 & the cartridges have worked in the past. I have popped the cartridges out & back in to get it to print twice, but now that doesn't work. Is the problem in my printer or have the drivers installed on my iMac become corrupted? I have the CD that came with the printer but to reinstall the drivers I would need to uninstall the ones on my iMac. I don't know how to do that. Does anyone know how to uninstall printer drivers? My OS is OSx but I don't know which version. My iMac is 3.5 years old.
Hi there anne_a,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
GT60-0NC SSD not detect in AHCI mode using sata3 port
GT60-0NC not detect my SSD in sata3 port using AHCI mode.
Using Kingston SSDnow V 300 120Gb
Test ok when setting to IDE mode or RAID mode.
Anyone know to resolve this problem.resolved after changing to Plextor M5S SSD
-
Ipod will not connect to any of my laptops with any of apples USB cords
for some reason earlier today i smelt a little burning smell coming from the bottom of my ipod...then it wouldnt connect to any chargers or laptops of mine..then i connected it to my bose sound system and voila itw orked..i thought hey it was nothin...well i went to go sync..and now none of my computers iwll reecognize it and none of my chargers will either..only my bose recognizes it and cahrges it..ive tried diagnostic and recovery mode but didnt relaly get far with it..
please help me...i realy dont wnat to pay 100 dollars to send it in to apple
thanksoh and i forgot to add...
the ipod itself works great..currently watching a movie..im hoping to run the battery all the way down and go from there
this is really annoying idk *** happened -
My I phone 5 got very hot actually boiling hot although it was not exposed to any external heat ...it was fully charged and within 10 minutes it was half charged 50% and within one minute it was shut down ... Tried re charging through the computer and through the power but no response the phone is totally black... Tried connecting to I tunes and no response.. The thing is that I bought the I phone 5 on the 23 rd December 2012 from Manhattan new York and I live in Qatar and there is no service centre in qatar .. I am now without a phone although I paid 706$ and that's a big amount .. I am disappointed .. I bought an original phone from the original apple store and I ended up with a product that didn't survive for a month.. What quality assurance do the apple have on their products...I need help here
I appreciate the fast reply.
Well, I checked the iphone and the battery charged going from the bolt to the plug in the upper right hand corner very quickly. On my other cell phones, charging took a REAL long time.
Again, is this normal? I unplugged the iphone from the charger and I am going to monitor the battery power today. I find it odd that the battery would work on standby for 4 days without recharging the battery and then start doing something wacky. Any thoughts?
Maybe you are looking for
-
I recently changed my Apple ID and password. Although I thought I was changing my iCloud email which I just learned cannot be changed. I am in the middle of an ugly separation. I just upgraded my old iPhone 4 to a 5s. I have an I pad also. My first
-
Validating a xml document via dtd or xml schema
hi. i am trying to validate a xml document's structure via dtd or xml schema. unfortunately i dont have a clue how to do this. although i read some documents about it i didnt find a way to it yet. i am using dom4j to build a org.dom4j.Document from a
-
Album artwork does not appear in album list or grid
I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view. What am I doing wrong? Artwork files were scanned from album covers that I have.
-
Application dll hook with virtual application
Hello there, We are trying to virtualize a anti-RSI application. This application uses a dll called hook.dll to check the number of keys you press on your keyboard. Is there a way to achieve the same connection between the virtual application as the
-
So my computer just wasted the better part of the last 72 hours of its life. I've tried multiple times to export an AECS6 composition under different settings, and keep getting encoding failures at random places. And I'm seeing a lot of this same t