I phone camera is not working after the update

I have an iPhone 4S 16 GB, It worked perfectly under iOS 7.1.2. . . I upgraded the OS to iOS 8.0.2 about two weeks ago. ( Bad Move )
I noticed right off that my device was running a little slower, lagging, and worst of all my "Camera"  App does not have an image At All ! ! !
The Flash options, HDR options, Timer options, will switch back and forth, but that is all that works, none of the bottom selections work at all,
and when you hit the front/back camera icon, it freezes /locks the options that did work. I have done a deep restore twice on the device,
restored as New Device, still no change at all on the behavior of the Camera operation. One thing I did find out though, it is a Glitch in the iOS
software, pertaining to the Cameras Operation, reason being, is that I can go into the preinstalled Game Center App on the iOS 8, click on Add Photo,
click on Take Photo, and there are my cameras, working perfectly, front & back. I have done a lot of research on this issue over the past two weeks,
Reading Apple's own Compatibility Devices which start at iPhone 4S and later for the iOS 8.0.2, But, If you go into the iPhone iOS 8.0.2 Operators Manual, go to camera section, you will see that there are several of the New functions of the Camera that are only compatible with iPhone 5 and later. Leaving the iPhone 4S not capable of executing the full capabilities of the New Camera App. I've chatted with Apple Online Chat Support for several hours two days ago, the only resolve they had was to send the device in or take it to an Apple Store and they would correct that issue "Free of Charge", even though ,my iPhone is 3 years out of warranty, because it is a Software related issue.... All I wanted to do is find a way to revert back to iOS 7.1.2, I found out very quickly, that is Impossible to do, because it violates Security Issues and Apples Terms of Agreement," Leaving them Not Responsible for any issues what so ever that occurs to your device downloading the iOS 8.0.2. . Which in my opinion, is pretty messed up. . What is the Big Deal of reverting back to any iOS you want, Apple should support every iOS version they have, not the users fault that a New iOS does not work right on their device, slowing it down, etc...I run Windows 7 on my PC, I can revert back to any OS I want, no problem at all.. . Anyways, back to iPhone issues, The other issues I got with the upgrade is that, My device will not power back on after I power it off now, I have to do a reset to get it to booted back up and running, and when I do so, there is a white halo that appears on my screen for several hours, then it will finally dissipate (no idea what that's all about), , Also, the battery life is much shorter now, had much better battery time on iOS 7.1.2 . . . Apple Support said that my Case was the first they have heard of, which surprised me.

Is anyone having a solution for this????? don't say that to sell the phone or upgrade it to the next version? I want to use this phone as it was a last gift given by one important person in my life and can't throw it away, please give me a solution.

Similar Messages

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Jquery content not working after the updates from firefox

    Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
    Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
    The banner URL is http://www.irs.com.my/slider/index.html

    SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
    I studied the script before discovering that and found two issues, but there might be more:
    (1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
    firefox2:F.match(/firefox\/2/)?true:false
    (2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

  • HT203171 my track pad is not working after the update of iTunes 11.1 version.

    Two years old macbook pro track pad stuck up and moving without my fingers,this thing happens from 18 th of this month,on that day i hadbeen updated the new itunes for iOS7...after that my mac book pro trackpad not responding...please help...

    I have been experiencing the same issue. My MacBook Pro is a little more n 3 years old.
    AFter the updates, my computer seemed to run very erratic when running a few programs at once and the trackpad suddenly went on the fritz. For a week now, it jumps around erratically and selects things on its own.
    I reset the PRAM, tried it in safe mode, reconfigured the mouse settings and nothing seems to work.
    HAe you had any resolution yet?

  • The device mini iPad is not working  after the update of the system

    Hello,
    I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
    please replay me .
    Best,
    Mawaddah

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • The shared librery is not working after the update!!!!

    I use to have the music on my mini shared with my other computer. This configuration is working well at least for a year. After the recent upgrade instead the shared library is not seen anymore.
    There are no firewall in my lan, the sharing option is active and no changes were made except this hexed update! Please give me some advice how to solve my problem!

    Hi Marco,
    Just tought I'd update you on progress. See http://discussions.apple.com/thread.jspa?threadID=1125125&tstart=0
    Looks like you need to use the "share selected playlists" option, rather than the whole library and make sure the playlists aren't too long (how long is a piece of string etc.)...
    Best,
    Alex

  • My ipad2 wireless not working after the update to ios 6.1.3, what can I do?

    Hi, My Ipad2 could not connect again with the wireless after updated to ios 6.1.3. Pls what can I do?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • GetSymbolTypeName() is not working after the update??

    i just updated into the latest version of Edge. i was debugging when i found out that getSymbolTypeName() is not working anymore. any solution to this?

    You can access the name attribute on the sym object as below:
         var symName = sym.name;
    hth,
    Vivekuma

  • ITunes is not working after the update

    After iTunes update i cant open iTunes anymore.

    Same.  Try to open iTunes and the icon bounces once, then stops.  No other activity.

  • Lumia Camera/4K not working after Denim Update

    Hi, Received the Lumia denim update this morning but after installation, the Lumia Camera app is not open (displaying a megbox that says "Lumia camera requires Lumia denim software update") and the extra+info still shows "cyan". The rest of denim update features are working fine...
    Any solutions?
    Solved!
    Go to Solution.

    farhanhadi80 schrieb:
    Received theLumia denim update this morning…
    You got the OS update to ‘Windows Phone 8.1 Update’ which was released in September 2014. You have not received the firmware update ‘Lumia Denim’, yet. Even if Extras+Info shows different – it is wrong for many users right now – you do not have ‘Lumia Denim’ yet. Furthermore, even if several new features work, those features required just the OS update, not the firmware update. Lumia Camera 5 requires the firmware update which is not yet available for your firmware variant (059W1L3). When you have ‘Lumia Denim’ the firmware revision number starts with 02540.xxx for a Lumia 930 and Lumia 1520.
    When is Lumia Denim available for 059W1L3?
    Nokia releases the firmware files in batches, and does not tell us users when. Could be hours, could be months.
    What is a Product Code?
    Every model, type, color, and even each region, country, and operator does get its own Product Code, ending-up in thousands of firmware files.
    What was the designation 059W1L3?
    Egypt, Iraq, Jordan, Lebanon, Lybia, Palestine, Pakistan.
    Do I get updates always last?
    Not in general, because sometimes countries like the UK are first, sometimes UK is last. Again, Nokia does not tell.
    Did that help?

  • Camera raw not working after recent update

    I updated my creative cloud apps last week.  Now when I try to open a raw image, photoshop opens then crashes before camera raw can open?  I have also tried to open images from bridge and it does the same thing?
    I have uninstalled and reinstalled both photoshop and bridge?  I spent over an hour on the phone with tech support in India and the tech couldn't find the problem?  I am suppose to hear from someone above him in the next few days.  I run a retouching business and cannot afford to be down!  Please help.

    You may get better help in Bridge General Discussion or Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • How can I test my thunderbolt port? It's not working after the update to 10.10.1

    I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
    Any idea how can I test my Thunder bolt port?
    This is what I have done:
    1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
    2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
    3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
    All the test pass from the Hardware test at the startup (press D at boot time).
    Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
    Thanks!!!

    restore iPhone

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Maybe you are looking for

  • A link in my Most Visited folder has just disappeared. How can I get it back?

    Usually they disappear coz I click "delete this page" or something but for this link, I didn't. I did log into this website at another computer and when I went on it on this computer, I had to re log back in (it remembers my password usually). Maybe

  • Java Applet fails to run after JRE upgrade

    I had JRE 1.6 which was updated to 1.8.0_31. After this update my applet has stopped working and I am getting below error java.lang.ExceptionInInitializerError   at com.sun.deploy.net.protocol.https.Handler.openConnection(Unknown Source)   at java.ne

  • Doubt about RESOURCE Role

    Hi Granting resource role to a user gives unlimited quota on default tablespace. Then why it's not shown when i query like this BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production PL/SQL Release 11.2.0.1.0 - Production CORE 

  • Can you upgrade from Photoshop CS to CS6

    I'm changing computers, so I will have a new system. I've had Photoshop CS for some time and have been happy with it. However, I am due for an upgrade, so is it possible to upgrade to CS6 without having to pay full freight for the full CS6 program. T

  • FCP shuts down when playback from timeline starts

    I am running a MAc G5 Tower on Mac OS X 10.4.10 with 2 Gb of RAM. I have Final Cut pro 5.0.4 and when i open a project i know has worked in the past it shuts down as soon as i hit the space bar or play button. Does anyone have any insight on my probl