I Phone disabledattempts to sign on because forgot password and made too many
I Phone is disabled because I forgot password and made too many attempts to sign on. Tried to connect to I Tunes but will not connect. How do I get phone disabled?
You must restore the iPhone with iTunes. Place the iPhone into recovery mode in order to do so.
http://support.apple.com/kb/ht1808
Similar Messages
-
I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?
I was wondering if you ever figured this out. I have the same issue. When I try to use the support communities, there are so many with the same problems and never seem to be any replys?? Not very helpful and I can not get Apple to return my emails.
-
My Ipod locked up because I forgot my password when it opened to the lock screen and it then said IPod disabled connect to itunes. When we did that it asked to restore did that and backed up my ipod then restored. Now it says "IPod connect be restored and unknown error has occurred 2009". What do we need to do now"? Can someone please help?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related toconflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am not able to open my ipad when forgot password and made several attempts to open it .The message " iPAD is disabled..Connect to itunes" appers.It is not opening even after i changed the password.Need support.
Try and force iPad into Recovery Mode:
1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
2. Connect USB cable to computer, leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Hi downloaded the iOS7 on my iphone 4S..... when it prompted me for passwords for icloud ... i forgot it and make to many attempt.
My phone was disabled. HelpIf your phone is disabled, then the serial number is not going to help you with anything. You need to read and follow the instructions in this support document for a device that has been disabled. http://support.apple.com/kb/ht1212
-
I have been using my apple TV successfully for 1 year. Today there was a message telling me I cannot sign in because the terms and conditions have changed. Please go to apple support for more info. However, I cannot find any info. What do I do next.
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
Ok I want to update my phone but I try to put my password and it say it's not it but it is it, what can I do to fix it
By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are using a new computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences(under the edit menu if using Windows)>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal or Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, DO NOT SYNC at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go. -
HT1688 my phone keeps asking me for my voicemail password and won't let me cancel
My phone keeps asking me for my voicemail password and I can't cancel out of it and I can't power off because the slider to confirm powering off is behind the password question! Help!!!
Enter the voicemail password.
-
I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues over the phone. Adobe doesn't care about their older products - they don't care that I spent hundreds of dollars for CS3. This is truly disgusting corporate behavior. Is there anything I can do? We aren't all rich photographers. I paid a great deal of money for this product. Is it now useless?Thank you,
James ScottHI James please contact the Adobe Chat Team for activation issue
kindly do the mentioned steps as follow in order to get hold of chat rep of adobe
Go to www.adobe.com/getsupport
select the product as adobe creative suite - then select the issue as adobe id and sign in - and then click on still need help contact us then you will be able to find chat option and they will help you with the chat issue -
When I sign in with my password and apple ID on my apple TV it bow says "Not connected to iTunes store"?
I searched for you and found this answer:
com.apple.appleaccount error 403 is the "best guess" error presented by IOS 7 when it see's the 3 user creation limit is reached and you attempt to create a new ICloud account by logging into ICloud on phone that has used all 3 account creation limit set by Apple.
Fix: go to a different Apple device that has not burned up its 3 per device ICloud account creations and setup the account there.
NOTE: you will use up one of the 3 maximum ICloud account creations on the device you use. -
trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP. -
How do i reset administrator password if i forgot password and do not have start up disk
how do i reset admin password if i forgot password and do not have start up disk
http://osxdaily.com/2011/04/25/change-admin-password-mac/
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in carefully and correctly, but I get an error window, "MF Message Error Domain error 1032" -what does this mean and how can I get around it? My password is long and convoluted, but it works when I type it in on my main Mac workstation, just fine.....what gives?
try restarting the phone and try again
-
Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.
It's starting in safe mode > http://support.apple.com/kb/HT1564
First of all, do a PRAM reset. If it doesn't help, open Terminal and type:
sudo nvram boot-args="" -
How do I create a "forgot password" and "forgot username" Form?
Good Day,
I am in need of assistance in learning how to create a "forgot password" and "forgot username" form in DW CS4. I have researched Adobe and the Internet and I am coming somewhat empty on tutorials or step-by-step instructions.
I would appreciate any step-by-step instructions, a link to a good online tutorial, or any other related source that can help me get from beginning to end.
Thank you.Hope this work for you...
What kind of web programming do you use for? If you use PHP MySQL, you can do it easily.
For example I use a MySQL Table called "admin":
CREATE TABLE IF NOT EXISTS `admin` (
`id` int(10) NOT NULL AUTO_INCREMENT,
`name` varchar(64) NOT NULL,
`email` varchar(64) NOT NULL,
`username` varchar(64) NOT NULL,
`password` varchar(64) NOT NULL,
`activation` varchar(64) NOT NULL,
`level` int(2) NOT NULL DEFAULT '0',
`date_registered` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
PRIMARY KEY (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=2 ;
INSERT INTO `admin` (`id`, `name`, `email`, `username`, `password`, `activation`, `level`, `date_registered`) VALUES
(1, 'Andoyo', '[email protected]', 'andoyo', 'andoyo', '8e67d638c0d130a4d66b2888ffc8335b', 0, '2011-09-21 10:32:16');
Make two files, they are:
forgot_password.php, contain form and php mail function
error.php, a redirect page if the mail function doesn't work.
And then, use your Dreamweaver to make a recordset, called: rsForgotPassword
Click Insert > Data Objects > Recordset
Name: rsForgotPassword
Connection: adobe_cookbooks
Table: admin
Columns: All
Filter: email, Form variable, =, email. Use form variable to pass the value from the form.
Click OK
Use if function to make the forgot function work perfectly, for example:
If the email is entered correctly, the mail script will run
If the email doesn't exist in the database, the notification will come out
If they open the page directly, they have to type any keyword
Final example:
forgot_password.php
<?php require_once('Connections/adobe_cookbooks.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$colname_rsForgotPassword = "-1";
if (isset($_POST['email'])) {
$colname_rsForgotPassword = $_POST['email'];
mysql_select_db($database_adobe_cookbooks, $adobe_cookbooks);
$query_rsForgotPassword = sprintf("SELECT * FROM `admin` WHERE email = %s", GetSQLValueString($colname_rsForgotPassword, "text"));
$rsForgotPassword = mysql_query($query_rsForgotPassword, $adobe_cookbooks) or die(mysql_error());
$row_rsForgotPassword = mysql_fetch_assoc($rsForgotPassword);
$totalRows_rsForgotPassword = mysql_num_rows($rsForgotPassword);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<p>Forgot your password:</p>
<?php if (isset($_POST['email']) && ($row_rsForgotPassword['email']=="")) {
$colname_rsForgotPassword = $_POST['email']; ?>
<p>Email doesn't exist in our database</p>
<?php }elseif (isset($_POST['email'])) {
$colname_rsForgotPassword = $_POST['email'];
$username = $row_rsForgotPassword['username'];
$password =$row_rsForgotPassword['password'];
$to = $row_rsForgotPassword['email'];
// Mai function
$subject = "Your username dan password: ".$row_rsForgotPassword['name'];
$body = "<html><body>" .
"<h2>Thank you...</h2>" .
"<p>This is your username and password:</p>".
"<ul><li>Username=".$username."</li>".
"<li>Password= ".$password."".
"From: Webmaster www.javawebmedia.com";
$headers = "From: Webmaster www.javawebmedia.com <[email protected]>\r\n" .
"MIME-Version: 1.0\r\n" .
"Content-type: text/html; charset=UTF-8";
if (!mail($to, $subject, $body, $headers)) {
$redirect_error= "error.php"; // Redirect if there is an error.
header( "Location: ".$redirect_error ) ;
?>
<p>Thank you, your username and password has been sent to your email.</p>
<?php }else{ ?>
<p>Please type any keyword.</p>
<?php } ?>
<form id="form1" name="form1" method="post" action="">
<p>
<label for="email">Your email:</label>
<input type="text" name="email" id="email" />
<input type="submit" name="Submit" id="submit" value="Submit" />
<input type="reset" name="Reset" id="submit2" value="Reset" />
</p>
<p>The username and password will be sent to your email.</p>
</form>
<p></p>
</body>
</html>
<?php
mysql_free_result($rsForgotPassword);
?>
error.php
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
Oops, error page.
</body>
</html>
Maybe you are looking for
-
I rented a movie and downloaded it to my iPad. Yesterday my iPad was doing some strange things so I went to the Apple Store and they said it was a software problem. I had everything saved to my laptop. so we cleared the iPad and set it up as new.
-
Can we able to call .bat file from Stored procedure?
My actual requirement is to import an csv file(where it contains a table) into oracle Database from the front end screen when the csv file location is given. Where in the screen (designed by dotnet) a browse option will be present and I will give the
-
Apple Remote Desktop 3.72 Shows Update in Store
I have been a many year user of Apple Remote Desktop, and have updated the administrative application routinely as available, as well as updating all of the client machines which I control. My MacBook Pro Retina machine running OSX Yosemite with all
-
Cost center planning data-Plan Variable Costs in Object Currency
Dear All: I have copied a standard planning layout and for the field, 'Planned Fixed Cost' and 'Planned Variable Cost', I have selected 'Plan Variable Costs in Object Currency' and 'Plan Fixed Costs in Object Currency' as the Key Figure. I am doing t
-
To buy or not to buy, just a few questions
Recently i have been wanting to buy myself a new laptop, and the thought of a apple laptop crossed my mind, i really like how lepoard is going to be, and i was wondering if this is the laptop i want to have and be able to run the OS in the system I p