I phone disconnecting all the time
My i phone seems to disconnect right after I answer the phone.This happens with new numbers mostly or numbers that are not in my phone book. This is a pain as I am using this phone for business and then my customers get irritated by delayed response.
Get a bumper for your iPhone to ensure you are holding it correctly. I'll leave a link for them at the bottom of this post.
AT&T is also notorious for having terrible cellphone quality and frequent call drops, if you are on AT&T.
http://store.apple.com/us/product/APPLE_IPHONE_BUMPERS-104238
HuskieN
Similar Messages
-
40gb Ipod says "do not disconnect" all the time... please help!
My 40gb ipod just says do not disconnect all the time when it is connected to my pc. itunes says the update is complete and my computer is recognising the ipod.
please help!!!I'm having the EXACT same problem... it all started after I did the iPod software updater...
HELP!!
BTW - my iPod is the 20GB
iPod is running fine (otherwise), but will not update, even though iTunes says update is complete. iPod screen continuously flashes Big Red Do Not Disconnect screen.
Oy. -
5s ios8.1 wifi disconnect all the time
My 5s using ios8.1 cannont connect wifi very well.
It disconnect all the time when I am playing games, even I sit by my AP.
Ios8 wifi problem seems a big issue, but Apple just ignore user experience.Hello epatjn,
We've an article that can help stabilize your WiFi connection.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen -
a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.
-
Usb3 drive disconnecting all the time at a usb 3 port on my macbook pro
i just bought the new macbook pro 13 inch and i was into some point tricked because the salesman from apple assured me that the laptop would be shipped with mountain lion and i could do the upgrade for free for maverick. so when i recieved the computer i found out that it actually came with maverick intalled and after talking to an apple customer support he said i could not go back to mountain lion. so most of my software are damaged according to the new system and it simply doesnt let me open many apps i just installed.
so now i have another bigger problem. everythime i connect a usb 3 HD into my new macbook, the HD gets disconnected. i used already 3 diferent drives and tried at least 3 diferent cables but the problem persists. Note that it never happenned with a usb2 port. is anyone having the same problem?
at this point i am pretty upset with the company alltogether. i had purchased at least 30 macs and i never had any sort of problems till now.I just got a new IMAC and experienced the same issue with a RAID 10 array with 4 drives spontaneously disconnecting in the middle of a data transfer with the message "you should eject disk properly, etc. etc." message.
As many others I tried all the obvious solutions. Different cables, different drives, etc. Then I read something about radio wave interference from wireless keyboards. Well, I don't have wireless keyboards or mice (don't like them) but still, it stuck in the back of my mind.
I did find that a USB 2.0 cable with noise suppression dongles at each end worked just fine, if a bit slowly. Anyway, I found an old set of ferrite couplings that were made for video cables back in the day and placed one set at each end of the USB 3 cable. I then moved my RAID array as far from the computer as possible and plugged it all back in. The problem has not reoccurred even with the transfer of very large folders of files from a networked PC RAID.
Just a thought but it seems to have worked for me although the fact that this sort of thing is necessary does not speak well for Apple. -
I HATE IOS 7. ever since i downloaded it, my phone crashes ALL THE TIME.
Does ANYONE else have this problem? It's a new phone because I sent it in and they sent me a refurbished one. But it keeps crashing ever since i downloaded ios 7. I hate ios 7. I know you cant downgrade but is there anybody that can get around it? Everytime I go to some apps my phone shuts off. It's ridiculous. I'm about to be done with iPhone and apple. Can anyone help me?
Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.
-
E52 - phone freezes all the time in between
freezes alll the time - like between opening music player, opening inboxes- opening "messages" section", etc
ive got a 16gb memory card, this may be a cause or something - NOKIA FIX IT!
E52 - Product code 0585050oh i looked this up on the internet - im posting it on here just in case theres anyoen else who is curious too
Rating Speed (MByte/s) SD Class 6x 0.9 n/a 10x 1.5 n/a 13x 2.0 2 26x 4.0 4 32x 4.8 4 40x 6.0 6 66x 10.0 10 100x 15.0 15 133x 20.0 20 150x 22.5 22 200x 30.0 30 266x 40.0 40 300x 45.0 45 [edit] SD Speed Class RatingsSD Cards and SDHC Cards have Speed Class Ratings defined by the SD Association. The SD Speed Class Ratings specify the following minimum write speeds based on "the best fragmented state where no memory unit is occupied":[8]
Class 2: 2 MByte/s - 13x
Class 4: 4 MByte/s - 26x
Class 6: 6 MByte/s - 40x
SD and SDHC cards will often also advertise a maximum speed (such as 133x or 150x) in addition to this minimum Speed Class Rating. Important differences between the Speed Class and the traditional "X" speed ratings are; 1) the ability of the host device to query the SD card for the speed class and determine the best location to store data that meets the performance required, 2) class speed defines the minimum transfer speed. Even though the class ratings are defined by a governing body, like "X" speed ratings, class speed ratings are quoted by the manufacturers but unverified by any independent evaluation process.
On 21 May 2009, Panasonic announced new "class 10" SDHC cards, claiming that this new class is "part of SD Card Specification Ver.3.0".[9] Toshiba also announced cards based on the new 3.0 spec[10] As of November 2009[update], the SD Association's Web site does not include information on this new class or new specification.
- from wikipedia, not a reliable source, but hey - it helps! hehe
i was wondering - is there a such thing as a 16gb class 6?
i can only find class 6 8gb (again from amazon)
E52 - Product code 0585050 -
been having problems with my BB option 3 since i moved home 3 weeks ago
had line test done by BT used the BT speedtest website and just recieved a new HH v2 today
i get very regular disconnects sumtimes every 2-3 minutes longest ive had a stable connection for was just over 1 day
this is my line stats with the new hub attached currently connected via ethernet to HH v2 to test socket with filter and phone plugged in. new HHv2 seems to be actually disconnecting wore than the old one
speed has just dipped down from 6.2mb to 2.3mb as well
need help as im tearing my hair out with telephone support
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:17:05
Downstream
2,304 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
32.6 dB / 11.0 dB
Line attenuation (Down/Up)
11.0 dB / 9.0 dB
Output power (Down/Up)
15.8 dBm / 12.5 dBm
Loss of Framing (Local)
47
Loss of Signal (Local)
52
Loss of Power (Local)
0
FEC Errors (Down/Up)
37 / 0
CRC Errors (Down/Up)
4 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
338eniginner been
new socket fitted and changed the lines in the green box in the street over to new set of wires as there was sum "iffy looking" connections
also recived a new HH v3 in post
still getting disconnects but not as many
new line stats
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 04:37:37
Downstream:
7.469 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
14.6 dB / 26.0 dB
Line attenuation (Down/Up):
9.0 dB / 6.5 dB
Output power (Down/Up):
18.0 dBm / 12.2 dBm
FEC Events (Down/Up):
4918145 / 323
CRC Events (Down/Up):
6995 / 318
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
274740 / 344
Error Seconds (Local/Remote):
1161 / 414
Download speedachieved during the test was - 0.72 Mbps For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps. Additional Information: Your DSL Connection Rate :7.65 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 2 Mbps -
D110 keeps disconnected all the time
Every single time I turn on the printer, the Hp center says the same, printer disconnected, i've tried everything I could like, restarting the pc, turning off and on the router, uninstalling and installing the drivers but it seems that nothing have worked so far.
I'm giving my system's specs so anyone with a posible solution can help me with this issue that is becoming annoying.
Windows 7 64 bit home
Eset Smart security antivirus
actiontec mi424wr rev. e Router (Fios service)Download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My ipod says disconnect all; the time now i have updated and restored it
I just opened itunes & connected my ipod. I restored my ipod because i deleted the songs from my ipod and updated it but they didnt come of so i used iupod updater and now it just say "do not disconnect" but it is not showing "do not disconnect" in itunes, but it is on my ipod.This is my second ipod and the same happened last time. can someone please help?. Thanks
If you automatically update your ipod, here's what to do, connect your ipod and WAIT untill itunes knows it's there, then go to edit, preferences, then go to ipod, then if you auto update it, make sure that the box that says "enable disk use" is unchecked. Then click ok. If you manually update, slect auto-update without the "enable disk use" selected.
-
Ichat disconnects all the time
Hey all,
I'm experiencing a problem with ichat. Whenever i sit idel for 5-10 mintues ichat discconects on me. is there anyway i can have a steady connection on ichat?!HI Projkt:
Could you tell us a little about your set-up? Are you wireless? Is your Mac going to sleep when it disconnects? Are you behind a router, if so, what's the model/make?
If you are wireless and your Mac goes to sleep, you will loose your AIM connection, the only way to resolve that issue is don't let your mac go to sleep. -
Updated N70 Now phone restarts all the time
I recently updated my N70 to the latest firmware, now my phone hangs and crashes on a regular basis, which it never did before. The phone is now almost useless!!!
Can the update be reversed to my old firmware version???
Any help would be appreciated!!
Regards
SimonTry the following...
- turn phone off. Remove SIM & wipe gold stip then re-insert SIM turn phone on.
- Change ur network settings to Dual Mode if ur are using 3G. by going to Settings --> Network --> Network Mode --> Dual Mode.
- Change ur netwrok setting to GSM mode if ur are using 2G SIM only by going to Settings --> Network --> Network Mode --> GSM
- Must be Faulty Battery or somehow batter has been corrupted... insert new battery.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions! -
Anyone know why the BB Storm 9550 reboots whenever it wants? This happens all day long. Help
OK, your file free and OS release are fine.
The next thing to do would be to look at what apps you have installed and if one of those might be causing it.
Another thing... for now, let's try this... place a business card or folded piece of paper over the battery, just lay it on top, and replace the battery cover. There's always a chance the battery has a loose connection, this might hold it tighter.
Try this a day or so and see if the reboots persists.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
HT4628 Wi-Fi disconnects all the time
It is very annoying. I have Mac Air. My infrastructure is WPA2 Enterprise using Cisco equipment. This works fine for my Windows PC and Android devices. But Apple products lose connection every 5 minutes, it seems. How do I fix this?
Hello Mikolk,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
The following Wi-Fi base station (or Wi-Fi router) settings are recommended for all Macs and iOS devices.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Have a nice day,
Mario -
Hi
Why does BC server connection disconnects so often? in DW and now using Espresso, BC connection will disconnect every few minutes. Really annoying.
Anything I can change in the FTP setup?
Thanks
MichaYes,
open the Windows Command Prompt and type ping -t yoursite.com (this should be your site url, without the www or http://)
You can open the command prompt by pressing the Windows key, then typing cmd.exe (if you're using Vista or Windows 7).
After entering ping -t fuxcan.businesscatalyst.com and pressing CTRL+C I got this:
Average ping 147ms and 0% packet loss.
Best regards,
Iulian Radu.
Maybe you are looking for
-
I own a Macbook Pro 2008 and Airdrop doesn't work? Final Cut Pro X Flop!
Aidrop: Why does Apple offer such features and then they don't work? Apple is on a mad way i think? Final Cut Pro X: ...also with Final cut Pro!!!! support please! Apple stands for a minority of creative People. There Machines stands for creativity a
-
Weird Issue : Difference in HTML/excel output and pdf/rtf output--Urgent
Hi There, I am facing a weird issue. I created one rtf template. When I preview the o/p in rtf or pdf, everything comes up as expected. When I preview the same in html or excel, few rows come up as bold though they were not supposed to. What could be
-
How can I type in Farsi in indesign cc?
-
why cant i save phone image to photo album...its show save this image to your phone app?,,,,,but no image is save
-
HOW TO REVERT TO BT YAHOO! CLASSIC MAIL
This solution can be found buried in various threads elsewhere in the forums, and thanks are due to the posters. But so many people have issues with the All-New Mail that I thought it might be helpful to draw attention to it under a specific title. M