I phone opening in I tunes when not connected

Has anyone experienced their I phone coming up on the iTunes page when the phone is not even connected?
This started happening since updating to 5 with my iPhone 4

Did you select the option to allow the device to sync via Wi-Fi?
If so, is it appearing in iTunes when connected to external power?

Similar Messages

  • Phone shows up in itunes when not connected

    I have unplugged the iPhone from the computer and used the eject button as directed.  Few minutes later, the phone shows up again.  The phone also has tried to sync wirelessly without launching the service.  Also, the phone is checked off to only sync when connected.  To add to the issue, if you go under settings on the phone and select sync now (wirelessly), you should not be able to sync unless you are plugged into a power source.  My phone will go ahead and sync

    I tried deleting it off my phone and redownloading it. But have the same issue.

  • HT2292 hello i'm facing  problem  i downloaded iTunes version 11 32bit  and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my interne

    Hello i'm facing  problem  i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my internet is on

    Try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k netsh winsock reset
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    You should get something similar to this:
    Reboot the computer and the problem should be resolved.
    If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
    tt2

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
    or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung

  • TS1368 when i apdate my ios  the iphone want to connect to itune and when try to connect i have this massege on the i tune on the pc (i tunes could not connect to itune store an unknown error occurred 11556)

    please anser me fast what this massege mean i tunes could not connect to itune store an unknown error ocurred 11556.make sure your network connection is active and try again   , and my i phone is not working only if i have connection from i tunes

    See this article:
    http://support.apple.com/kb/ts3297
    You will find your error number under "Specific error conditions and Alert messages"

  • When I plug any of my phones into the computer it does not connect.

    When I plug any of my phones into the computer it does not connect. I can hear a beep but that's it.  I checked all of my USB cords and the same results. Normally it would download my new pictures and start charging and that no longer happens. When I plug my wall charger in the phone charges.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store

    its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store?

    1. Sign out of Apple ID and sign in again
    2. Settings>General>Date & Time>Set Automatically>On

  • Ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

    ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

    On an iOS device yes unless you pre-download the music. On your computer no, unless you decide to delete the tracks from your iTunes library. The latter is not recommended without having a full backup of your muaic files.

  • When i try and connect my phone to my laptop it does not connect

    when i try to connect my phone to my laptop it does not connect to itunes. so it will not let my backup sync etc

    many thanks.
    Are you currently running iTunes version 11.1.4.62? If so, I'd try updating to version 11.1.5.5:
    http://www.apple.com/itunes/download/
    If you're already at version 11.1.5.5 (or the update didn't help with the recognition trouble), try the procedure in Cerbu's post:
    Re: sync problem
    ... or try section 5 from the following document:
    TS1538: iOS: Device not recognized in iTunes for Windows.

  • HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

  • My ITunes works perfectly except for the ITunes Store which gives me the following message "I Tunes could not connect to the I Tunes Store. An unknown error ocurred (-3221)

    Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
    Make sure your network connection is active and try again.
    But my network connection is active.
    Help!

    Hi davwatto thanks for taking the time to reply.
    ok, so tried to open my safari which was version 5.1.7 and i received the error message:
    safari can't connect to the server
    safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
    The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
    The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
    Safari can’t open the page.
    Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
    Not sure how to check the logs for itunes though
    If you have any idea how to fix this issue that would be great as im at a total loss.
    Thanks

  • How to copy catalog from external hard drive to computer hard drive to use smart previews when not connected to external hard drive?

    I am very new to LR5. I have LR5 set up so that my catalog and photos are on an external hard drive. I found out that when not connected to the hard drive, LR5 cannot find my catalog, therefore, I cannot do any editing in smart previews unless connected to the external hard drive. How can I fix this issue so that I can edit photos without being connected to the external hard drive. Is there a way of copying the catalog off the hard drive on the computer hard drive or do I need to reestablish a new catalog using LR5? Does the catalog always need to be loaded on the hard drive? Thank you in advance.

    Yes that is correct. The LR catalog must be on the computers internal drive. Then when you have Smart Previews enabled you can edit image without having the drive they are on connected. Then when you connect that drive the images will be updated.
    Just COPY those 4 folders over to your internal drive to a folder called Lightroom Catalog that you create. Then Open LR and go to the File menu item and select Open Catalog. Browse to the folder you created called Lightroom Catalog and select the Lightroom 5 Catalog.lrcat file and click Open. Once Lightroom restarts open the preferences, Edit>Preferences, and on the General Tab in the Default Catalog section make sure "When starting up use this catalog:" area lists where you have copied those folders. Something like Macintosh HD/Wherever you created that folder/That folder name/Lightroom 5 catalog.lrcat.

  • Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range

    Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range

    Sorry, not sure what you mean by remotely?
    You can remove apps from your phone without being connected to anything if you have the phone in hand. Were you speaking about something else?
    If not, then you just press on an app on the Home screen and hold it down until they all begin to wiggle. Apps that you can remove (non-Apple apps) have a little "x" in the top left-hand corner. Tap on that, and the app will be removed.
    Cheers,
    GB

  • My iphone4 will not switch on when not connected to the computer

    My iphone4 will not switch on when not connected to the computer. If i connect it to the computer it switches on to recovery mode and itunes recognises it and tells me to restore it. When i then try to restore it it keeps giving me error 1611. When i connect it to the wall charger it switches on but gives the itunes sign. This really ***** now i dont know what to do. Is there still hope for my phone? Please help

    Will not turn on or will not activate?  The two are not the same, the specific issue affects how the issue is troubleshot.

Maybe you are looking for

  • What are the components of a completed BPD set?

    Hello, As you all are aware BPA suite allows you to create a vast host of diagrams. My question, For someone to claim that (s)he has done the COMPLETE set of Business Process Diagrams, aka BPD set, What components are a. Mandatory and b. additional/

  • Post calculation on database column in form

    I have a form created. for post calculation I convert text to upper case. upper(NAME); When I edit existing data in the form, and save the record. The data is converted to upper case. However when I create a new record and save it, everything is in l

  • Set first line indent to 0

    Hi guys! Wondering if there's a scipt to set the first line indent to 0 (just affecting the selected paragraph)? In my parapraph style i've set first line indent to 3 mm, but i don't want text after header to have indent. I've scanned the web for sol

  • Error message 403

    Hello, I have a HP 5520 All in one Printer and despite the fact that I have on previous occasions, used my scanner to email with no problems,  it hasnt been working of late and the above error message keeps coming up. I have tried all the suggestions

  • How to get music from my mac on my ipod

    how can i get music from my mac book on to my ipod touch,without deleating all my other music?