I photo don't work with Time Machine

I just have 2 weeks using this macbook, and i made a Time Machine just before sell my other macbook. Both have Lions because both are same 2.4 Ghz
Intel core i5 (the only difference is HD Disk). So i made all the time Time Machine, so i bring on all my information from my Time Machine disk... and everithing works fine BUT not my pictures. 
I lose all the pictures that i put in that Iphoto from day 1 that i use the other computer (6 months ago).
Its like Iphoto doesn't work with Time Machine.
To me is very important to someone from apple to explains me since, if that don't work as it suppose to be, then i have to look for a better bacjup program than this garbage.

1 - TimeMachine does work with iPhoto - except if iPhoto is running then the iPhoto database is not backup up until a backup cycle runs while iPhoto is not running
2 - Never "assume" that a backup is good - you must test it
3 - teh simple solution is to Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
4 - no one from Apple will explain anything to you here since this is strictlhy a user to user forum
5 - as to which backup program you use - totally your choice - no one here cares at all - we are willing to help you with iPhoto issues but could care less about if you use Apple software or not - since you obvviously have not bothered to learn how to use Time Machine you will have the same or similer problems with any software that you use incorrectly
LN

Similar Messages

  • Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

    Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

    Plug a NAS into the BT Hub that does TM. Look at Synology.
    You just use the wireless of the hub.
    But the cheapest solution is still the TC.

  • Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

    Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
    installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
    BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
    FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
    When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
    I re-partitioned disk to extened/journaled standard, etc.
    Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
    But, it has now been in "preparing" mode in Time Machine for HOURS....
    What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
    Are you trying to make issues with External disks, to drive people to iCloud?  That trick ont work in me. I will not reward bad behaviour Apple.
    Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

    Solved by Pondini, on another thread I opened...
    Answer:
    Sounds like either:
    A directory problem on your internal HD.  Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
    Something in OSX may be damaged.  You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that).  See Installing the ''combo'' update and/or Reinstalling OSX.

  • How can I make readyNAS duo 4.1.12 work with time machine?

    ReadyNas support don´t seem to have a clue. I have tried to desable cifs and afp and put it back as I read on other forum but with no effect.
    Time machine can´t access the backup disk  ReadyNas and  display OS status error 2.
    I appreciate any help.
    Thank you.

    Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
    See this post (Major Dude) that is in the More Like This section:
    Time Machine and ReadyNAS Duo

  • Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

    I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
    Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
    http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
    I followed the above steps but still can't connect to the network drive.  I have reformatted the TC and will be walking through the steps again.  My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
    I have created two user accounts with drive sharing activated.  One in my name for my MBP and the other in the name of my partner for her Dell laptop.
    Should the Time Capsule be partitioned?  Can it even be partitioned?  When I use Drive Utility it can't see the TC.  The only way to connect to it seems to be via Airport Utility.
    On a seperate note the TC Router Mode is set to OFF (Bridge Mode).  I have connected it to the ADSL modem/router (WiFi Off) via the WAN port.  All seems to be well.  Am I loosing any useful functionality by doing this?
    The internet settings are set Connect Using DHCP.  I have no issues but I am not really sure what it means and if I should be using other settings.  The ADSL modem/router seems to have all the PPP0E settings.
    The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network.  I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
    There is also a Canon WiFi printer that accesses the 2.4Ghz network.  It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

    Lion, 7.6.1 firmware and iCloud offers remote access.
    http://www.apple.com/au/support/icloud/back-to-my-mac/
    To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
    Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
    Do you have the TC as the main router?
    If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

  • La Cie Porsche Design External Hard Drive no longer working with Time Machine since update to Yosemite.

    My La Cie Porsche Design External Hard Drive USB 3.0 is no longer working with Time Machine.  Is Yosemite the cause?  How do I fix?

    Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

  • How can you configure a WD external to work with Time Machine??

    I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
    I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
    Here are a few questions...
    Any ideas on how to format the drive so it will work with Time Machine?
    Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
    Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
    Thanks in advance,
    Todd.

    You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
    If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

  • Time Capsule Not Working With Time Machine

    I'm trying to backup to my Time Capsule, which I haven't used in over two years. It had been displaced because of a change in internet service providers. The new provider came in with a Linksys router, setup a sub-network, and left the Time Capsule/Airport out of the mix.
    So I want to return to using my Time Capsule and have since pulled out the Linksys router, and got the Airport functionality working with the existing, primary network. In other words, the Time Capsule/Airport is working to extend the range of the network.
    Problem is this: I cannot backup to the Time Capsule. Even if I'm connecting to the Time Capsule via ethernet, I cannot get it past the 'preparing' phase when running Time Machine. It stays at the phase for what seems to me an inordinate amount of time (30-45 minutes). If I go into System Preferences, the Time Capsule disk doesn't make itself available when using it with Time Machine. If I choose to go into the Star Wars display of Time Machine, I can sort of see the various backups, but I can't roll back to them, and the backup indicator on the right looks sort of ghosted, like it's there but it's not there.
    How do I know if the disk within the Time Capsule is failing? Could that be what's going on? How would I test it? I get a green light on the front of the TC, but not everything is hunky dory since I'm not able to backup.
    Is part of my problem that I'm using a not up-to-date version of Airport Utility? –I'm using 5.4.2

    Oh and here it is, on this page, Section D, #1:
    "Section D.  OTHER  PROBLEMS  RUNNING  BACKUPS
    D1.  Stuck in "Calculating changes" or "Preparing""
    and then the Apple supporting doc, as well:
    http://support.apple.com/kb/TS1516
    Fabulous. Thank you.

  • I needed a 2tb hard drive for my new iMac whats the best to work with time machine for around £100

    Any suggestions about the best 2 tb hard drive to work with my imac,compatible with time machine for around £100

    There is no such thing as "best" and "inexpensive", you either want one or the other but you cannot get both. IMHO I'd recommend OWC's Mercury Elite Pro (www.macsales.com) however because  you are on the other side of the pond you may want to consider a Lacie product. High quality, not cheap but good stuff for the most part.

  • I am having an issue making power nap work on my mid 2011 mac book air with mountain lion and it is enabled in system preferences and plugged  in in sleep mode it does not seem to work with time machine overnight

    I am having an issue in making power nap work on Mountain Lion on my mid 2011 Mac Book Air. It is enabled in system preferences but with time machine and sleeping overnight it did not seem to do hourly back up as stated or any other functions of power nap that I know of. it has been enabeled on both battery and plug in dc and I did leave it on plug in overnight.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • What har drive is recommended to work with Time Machine smoothly?

    What hard drive - other than Time Capsule - works smoothly with Time Machine? I'm looking for one that is a little less expensive that Time Capsule but will work as well with Time Machine.
    Thanks for your help.
    Vernon

    Most any drive will work with Macs, and Time Machine.
    Most drives come formatted for Windoze, but most of them can be re-formatted on your Mac to work with it. See item #5 in the Frequently Asked Questions *User Tip* at the top of this forum.
    Also note item #1 there for size considerations; and items #3 and/or 4 for using with other data and/or other Macs.
    If you think you ever might want to put a "bootable clone" on it, be sure it's a bootable drive (some WDs aren't). Most PPC Macs can boot only from FireWire; most Intels can boot from F/W or USB.
    Depending on what ports you have, FireWire 800 is by far the fastest; FireWire 400 next, and USB slowest (F/W 400 and USB 2.0 are rated about the same, but since your Mac's CPU has to do more of the work with USB, actual throughput is usually less).
    Many folks think USB is less reliable than FireWire. If you do get USB, be sure to connect it to a port on your Mac, not a keyboard (that's USB 1.0). Try to avoid hubs, too.
    It's usually best to get a drive with it's own power supply, as taking power from your Mac can be a marginal proposition.
    Take any advice for or against particular makes or models with a grain of salt: all makers (of just about anything) can have a "run" of bad components, or a relatively few early failures. Plus, by the time any really good trends are noted, the model has probably been revised or replaced anyway!

  • External HD on AP Extreme works with Time Machine?

    Can I connect an external Hard Drive to the AirPort Extreme and use it to make copies with Time Machine?

    Time Machine backups to AirDisks (e.g. HFS+ formatted USB HDD attached to Extreme) is unsupported, but has been successful by some. As well, once you decide to move any old TM backups (HDD connected directly to the Mac) to an AirDisk, you cannot continue backing up to your previous TM backup. The format it saves to vs. a local HDD is different. The folder structure you see becomes a sparsebundle/disk image via the AirDisk.
    If you are interested in proceeding with your plan, check these links out:
    http://discussions.apple.com/thread.jspa?messageID=8225748&#8225748
    http://discussions.apple.com/thread.jspa?messageID=8650723&#8650723
    http://jamesshore.com/Blog/How-to-Accelerate-Time-Machine.html

  • How do I install an exterior HD to work with Time machine?

    How do I install an exterior hard drive for use with Time Machine?

    Plug it in. Time Machine will ask you if you want to use the drive with it, and if you do, it'll reformat the drive if needed.
    (103451)

  • Shared Hard Drive work with Time Machine

    I've been having limited success with using a USB hard drive connected to my Extreme Station.
    Is the Airport Extreme Base Station not really approved for use with Time Machine then? I know you can connect it and USE the hard drive but as far as Time Machine and successful incremental backups, it's not really made for that is it?

    Welcome to the discussions, zamboknee!
    Some users have reported success with using Time Machine for backups on a USB drive connected to the AirPort Extreme, but Apple does not officially support this function.

  • Does filevault encryption work with time machine?

    Filevault under Snow Leopard would allow you to encrypt data on your Mac disk but was not compatible with Time Machine i.e. you could not back it up once encrypted or restore it.
    Does anyone know if this has been addressed in Lion i.e. data encrypted in Filevault is capable of being backed up to a time capsule and is recoverable using Time Machine. 
    The release documentation does not make this clear, although a technician led me to believe it would be fixed in Lion.

    According to my experience and to this -> http://support.apple.com/kb/HT1427, FileVault in Snow Leopard was compatible with Time Machine.
    The thing was that, as FileVault encrypts your home folder as a disk image in 10.6, Time Machine was backing up that encrypted disk image. So
    1. Time Machine could backup your home folder only when you were not logged in your user session and the computer was awake
    2. with this system, you could not browse your home folder in the Time Machine incremental backups, but could only restore your complete home folder from that encrypted disk image.
    In Lion, however, Filevault 2 encrypts your complete hard drive.
    This means:
    1. You can use Time Machine with FileVault 2 enabled in Lion (http://support.apple.com/kb/HT4811)
    2. Recovery HD must be present on your computer's startup volume to use FileVault 2 (not an external Recovery HD) (http://support.apple.com/kb/HT4718)
    I guess Time Machine, like it used to do with the user's home folder in 10.6, will backup your encrypted hard drive in Lion, but you will not have the ability to browse your Time Machine backup to find specific files / folders in the backup. But this backup can be used to restore your system. (http://support.apple.com/kb/HT4811)
    (May someone correct me if I'm mistaken there ?)
    More info about FileVault 2 in Lion -> http://support.apple.com/kb/HT4790

Maybe you are looking for

  • Machine authenticatiion not working after upgrade to ISE 1.2

    After upgrading to ISE 1.2.0.899 patch 14 we have a problem running machine authentication for a few hosts (30 of about 3000). Although we can see on the switch that the host presents the hostname, in ISE Operations all we get is the MAC address (for

  • Error while updating the configuration files (MOB20003)

    hi, After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error

  • I recently got my laptop updated and Firefox was deleted and now all my bookmarks are gone. Is there any way to get them back?

    I had over 20.000 bookmarks and I really want them back. Please tell me theres some kind of backup system. Been using Firefox as long as I can remember and I love it!

  • Report on Deliveries

    Hi guys, i have to Create a report which will identify the deliveries where goods Issue status is incorrect, so for this i have to join vbuk and likp, how to join this two tables ? output fields are LIKP-VBELN LIKP-LIFEX LIKP-VSTEL LIKP-KUNAG LIKP-ER

  • AR Invoice Numbering for Closing

    Hi, When we perform our monthly closing, we sometimes need to post invoices dated in the previous month. For example, on Sept 3rd, we might create an invoice with a posting date of 8/31. Of course due to the legal rules of sales doc #'s continuing se