I-Photo Won't Start Up

Hi, I am new to MAC's. I have a G5 and using OSX. I have some photos on I-Photo and the other day I went to pull up I-Photo and it won't load. I-Photo comes up and it says loading and I get the spinning wheel. I let it sit for an hour and it still says loading photos...... I have turned off the computer and turned it back on. Still won't load. Any ideas on what I can do?

Hi 99c5pilot, and Welcome to Discussions!
You have posted in the Feedback About New Discussions forum.
You may have missed this notice:
PLEASE READ THIS BEFORE POSTING HERE
If your question concerns a hardware or software technical issue, PLEASE DO NOT POST IN THIS FORUM — instead, go to the Apple Discussions Homepage, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link.
You should post your question in one of The iPhoto Forums.
This one Installing & Using iPhoto 5", maybe?
Good Luck, and Enjoy your Stay in Discussions!
ali b

Similar Messages

Photos Won't Start on iPod Touch [2.0 Firmware]

I've got a strange issue with my iPod Touch (running 2.0 firmware). It appears that my 'Photos' preinstalled application won't start anymore. Since upgrading to 2.0, I hadn't sync'd any photos to my device and when I launched the app, it would just tell me that I had no photos as expected.
Recently I was reading an email and 5 photos were attached and I wanted to save them to the iPod, so I clicked Save All. After I clicked the button there was a delay (~1min) and I crashed back to the springboard. I say crashed because I didn't receive an error or confirmation message that the pics had been saved.
I then attempted to launch Photos and now whenever I do so, a blank list appears and then I crash back to springboard. Not really sure what's going on here and I'm thinking I may have to restore my device.
Anyone else run into similar behavior?
-D

Hmmm.. that's an interesting problem you have. While I originally thought that we might have the same problem, I think we're just showing the same symptoms. I went ahead and pulled the trigger by using the Restore function. Sure enough.. soon as Restoration was complete, I tapped the Photos button and as expected, the "No Gallery" or "No Photos" picture (I forget what exactly it states) was viewable.
I lost all my data, but everything is still on my local machine so this was a viable option for me.
I'm not sure if this will help you, but when I used the Restore function, I didn't opt to Make a Backup.. I just sync'd all my content manually after restoration. Maybe try that..
-D

Iphoto won't start. photo won't start because I need Library Upgrader? where can I get I as don't have the original disc.

iphoto won't start because I need Library Upgrader? where can I get I as don't have the original disc.

Sounds like you have a damaged library7 To check launch iPhoto with the Option key held down and try to create a test library. If you can import a few photos. If that works then your original library is damaged so make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Zen Micro Photo won't Start

Hi,
I have a Zen Micro Photo and it won't start up. The creative screen comes on and that is it. I have tried getting into the recovery screen by taking the battery out and replacing it while holding the power button on. That works and I can select any option but when I select say format, a screen comes up saying formatting but nothing happens.
I have also tried to push the reset button with a pin but it doesn?t seem to do anything at all.
The item is over 2 months old so I cannot return it under warrantee. I would appreciate any help.

I have tried to down load the latest version of the software (ZENMicroPhoto_PCFW_L6__3_0.exe) from the creative web site but when I run it, it says that the player is not connected even though it is. I have even tried to run?the program?while the player is in recovery mode but still nothing. Is there a way of forcing the computer to see it's

Zen micro photo won't start & not detected anym

hello!?my zen micro photo started acting weirdly lately: even when the player's battery was fully charged, the player would shut itself down automatically a second or two after being turned on. i managed to access the recovery options and do a cleanup, but the problem was not solved. after, it started telling me that the battery was empty even after being charged for hours on my computer. (and the battery is only a year old or so). then?a few hours later, it even failed to turn on at all, and has stayed like that since. i could at least access the recovery console, so i tried formatting the dri've, but there was no improvement. i then tried to use the recovery utility found on your website, which updated the firmware to version 2.3 however, there was no difference, and the player still doesn't work. finally, my computer won't even detect the player anymore (although i have made no changes to the computer's configuration), and it won't even charge it, since it is not detected. (the player doesn't show any sign when it is plugged) so now, all i can get from the mp3 player is a "low battery" warning, and only when i try to access the recovery console (otherwise, nothing happens). any ideas?thank you !

just an update:i tried the "caveman repair method" (http://forums.creative.com/creativel...cending&page=3)and it ... worked... partially...at least the player now boots, although only to display a low battery warning...BUT as soon as i plug it to my computer, it crashesand i already tried the rear usb ports, no better, as well as 3 different computers, no improvment neithersooooo... anything else?maybe roasting it next time would help lol

I photo won't start

I'm using a shared library with iPhoto and Aperture. For some time now iPhoto refuse to start stating that the library has to be updated with Aperture 3.3 or news.
Opening Aperture doesn't solve the problem as well as repairing database or access rights won't help.
The database works only with Aperture 3.5 and not with iPhoto 9.5.1
The only way for me to get iPhoto to open the library is to change two properties in the
DataModelVerrsion.plist. ifiel n the Database folder in the Library package.
If I set the the two values
<key>database|isIPhotoLibrary</key>
<key>isIPhotoLibrary</key>)
to false I can open the database with iPhoto again. Unfortunately iPhoto sets the values to true again when I class iPhoto again.
Can anyone help?

Opening Aperture doesn't solve the problem as well as repairing database or access rights won't help.
Have you tried to rebuild the library in Aperture instead of repairing it?
If all fails, back up the shared Aperture/iPhoto library and create a new one by exporting the complete library as a library: This will recreate the library as Aperture 3.5.1 library:
Select all items in the library at once.
Use the command "File > Export > Items as new Library.
This will need plenty of free disk space, more than the sizes of the exported library will be. You may want to create the new library on an external drive.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

Photo won't get started

photo won't get started after installing the new update (wheel spinning under the get started button)

Steven:
Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that is in your User/Library/Preferences folder. Also download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
How many iPhoto Library folders do you have in the Pictures folder? if more than one find out which contains your photos and move the other(s) to the Desktop.
Now launch iPhoto with the Option depressed and, when asked, opt to locate an existing library. Navigate to the iPhoto Library folder remaining in the Pictures folder and select it. It should open.
Do you Twango?

HT2729 When I hit camera then try 'Video' the program won't start just photos. What's wrong?

When I hit camera then try 'Video' the program won't start just photos. What's wrong?

Sounds to me like you are trying to tap on the word VIDEO.
To change to video you don't tap on the word VIDEO. Instead, you drag the centre of the screen down. That will change the option from PHOTO to VIDEO.
Of course, to go back to PHOTO or to SQUARE you drag the centre of the screen up.

On Etsy, many of my photos won't load. But they load if I switch to IE. This started yesterday. Why?

I have cleared my cache. The non-loading photos are consistent. Always the same photos won't load. Some others have reported the same issue on Etsy forums, but I don't know if they are using Firefox or not.
All photos load when I use IE.
I am on Firefox 3.6.4

It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

PB won't start, has no power, won't charge BUT I NEED THE INFO desperately

Hello! As the subject states, it won't start, has NoOoOoOo power, cannot get it to charge (and it's been plugged in now for 2.5 days). While RIM CS said they might fix it, I need to get the information off the tab first as it's REALLY really REALLY important.
I did post in another thread, but it seems my issue is just a little more challenging that most, as I've tried ALL the "ideas" that I have come across - here and in other site forums. If only it were as easy as the pins being bent or getting another charger.....
So not only will mine NOT start up, and is COMPLETELY dead, but (and here's the fun part) the USB port has been busted since purchase. (Thought we'd manage without, but hah....)
- the battery was NOT fully depleted when it crashed as it does every second day (this was Friday)
- have a Rapid Charger, and have been using it all along
- it has been plugged in for DAYS and nothing IS happening; no lights whatsoever
NO light red, yellow, green, or otherwise that comes on when plugged in (or otherwise)
- Looks like this "stacking" that keeps coming up refers only to when plugged into computers, which I cannot do,
though I did try the 2 min interval anyhow for awhile
- I DID hold down the power button for 10, 20, 30 seconds per notes on these boards
- I DID hold down the power button for 2 whole minutes even per some suggestion
- I DID try the power button with Volume + then with both volumes and power all at once
- In fact, if anyone anywhere wrote to jump up on one foot, I tried that too!
AND the reason it matters . . . there are photos or someone who has passed away on there that I need to get off before sending for repair (or better yet replacement if there are any left anywhere) and really need to get this thing started again. Been a long time that I've been trying to get these images off, though I think that's another discussion for when it gets started hm...)
Anything, oh wise BB PB peeps??
Thanks in advance!!

chaosdivine thanks for the idea!
Had to laugh at the comment that the USB would be wobbly after some time had gone by. Mine was broken after first attempt to even use it!
Anyhow, good post, but did all that already. Plugged in and sit, plug and unplug, plug and try to turn it on, leave it off, etc. and then some etc.

ITunes won't start up when connecting iPhone

My wife has been having this trouble for awhile, and now I started having the same trouble too. She has an iMac G5 running latest versions of Leopard and iTunes. I have a Power Mac G4 (Gigabit Ethernet model) running the latest version of Tiger and iTunes I also have a USB 2.0 PCI card which has already been tested and is operating properly. Both of our iPhones are the original model running iPhone 2.0, but this problem was happening on her setup before the 2.0/MobileMe fiasco.
Basically, iTunes won't start on her machine when she sets her iPhone into the iPhone Dock, even though it does show that it is charging. When she clicks iTunes, it syncs new data from her iMac to her iphone, but new data on her iPhone doesn't transfer to her iMac (remember, this is BEFORE the MobileMe/2.0 update). I've tried different sync cables, plugging it in to different USB ports, and always it's the same- it may work properly when I unplug the cable and plug it back in again, but after I remove the iPhone from its dock and set it back in, it malfunctions the same as I just described. It initiates a sync if iTunes is running, but not if iTunes is shut down. The crazy thing is, her syncing was working perfectly both ways until about two months before the MobileMe/2.0 switch, so I know it has nothing to do with that.
Today, my Power Mac and iPhone started displaying the same symptoms, but with a twist- I put my iPhone into its cradle, and nothing- no charging screen and tone, no syncing startup, nothing. I turn iTunes off, pull the iPhone out of the cradle, and set it back in again- nothing. iTunes won't even start up; and when I start it up myself, it still doesn't recognize the iPhone is there. I plug the iPhone into a wall charger using the same cable I sync with, and it starts charging with no problems. I plug my iPhone cradle back into my external USB hub, connected to one of the USB 1.1 ports, and the syncing/charging works flawlessly. The weird thing is, my 4th Generation iPod Photo is on a different dock with a different cable, plugged into the same USB 2.0 card, and iTunes starts and syncs with no problems with that iPod every time.
I've taken my wife's iMac, her iPhone, and her iPhone dock and cable in to the Apple Store's Genius Bar, but they weren't able to figure out the problem. They tried to redirect the syncing issues by trying to demonstrate iPhone 2.0's wireless push/pull capabilities, but they couldn't get that to work properly, even though all the settings on the imac and the iPhone were correct. All they could suggest was that I must have had a "bad upgrade" when I upgraded to Leopard (6 months ago?!?), and that I should try an "Archive and Install" of Leopard again to see if that sorts out the issue- something I do not really have the time to do (and my wife can't really be without her Mac for that long since she uses it for work).
I see a lot of similar issues on Apple's iPhone support pages with iTunes not recognizing iPhones when they're plugged in, or not charging when plugged in, etc. I've spent a lot of money on our Macs and our iPhones based on the idea (from Apple's own marketing) that Apple's products "just work". And darn it, with all the money I've invested into these products I just want them to WORK- EVERY TIME, without fail! These are the kind of problems I left behind in the Windows world, and I don't want their ugly heads to surface here too.

AND ALSO I TOTALLY UNINSTALLED ANY OF MY
ANTIVIRIS THINGYS AND THE SPYWARE STUFF.I D/K WHAT TO
DO ANYMORE!
*~PLEZ HELP ME!~*
Hi yesy
If you are sure you disabled your AV/antispy and you get the flash of a licence it sounds like you may have a malware infection. Look out for posts by b noir and get hold of ewido - its a free AV programme - google and you should find.
BTW, you may be in Florida and I'm in the UK, but don't shout - you're just next door in cyberspace!:) I understand your frustration coz I've been in your place. There are some really helpful folks on this forum - seek, and you shall find!
Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod
Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod

Macbook w/ whole slew of problems...Won't Start Up, Disk Utility Can't Repair Disk, Horizontal Lines on Screen, Etc.

I purchased my Macbook in the summer of 2011 and before it went berserk it was running Mavericks. 3 years later, it's finally seemed to have run its course.
It won't start up normally and it won't start up on safe boot. Attempting to use disk utility to repair the disk only gives me the message: "Disk utility can't repair this disk. Back up as many of your files as possible." There are also horizontal lines across the start screen (before it inevitably shuts down) and the screen looks very faintly purple-ish/off-colored.
This actually didn't come out of the blue. On Monday, my macbook suddenly froze, went white, and beeped three beeps repeatedly. I restarted it and backed up all my important work files and set up an appointment at the genius bar for Friday once work ended. It remained buggy during this process with the beeps returning an occasionally a blue screen popping up.
Unfortunately, there wasn't enough space to back up my important photos and by the time I returned on the next day with an external hard drive to store them on, my macbook would no longer turn on.
Is there anything I can do to bring my macbook back to life? Ideally I'd like for it to last one more year before I graduate college. Is it still salvageable, and if so, is it worth salvaging?

I hate to spread gloom, but that computer has serious problems. The only people who can diagnose the problem(s) are technicians. I would take it back to the Apple store for further testing.
Barry

My iMac G5 won't start - please help?

I don't get a chance to get near it very often, but my wife & kids say it has been really slow recently and particularly getting stuck in Microsoft Word. Then it froze. Now it won't start-up - get to the grey screen & the apple logo and the pin-wheel below goes round & round but nothing further happens. Then the fan starts spinning really loudly (indefinitely) so I switch it off & try again - same outcome. I have reset the SMU & PRAM, and run disk utility (says hardware all fine), but couldn't get it to archive & install.
Worst of all, I haven't backed up photos & quite a lot of work for some months
Any advice gratefully received>
Will

Welcome Will - try putting it in Target Disk Mode and see if you can pull the data off that way. Use Disk Utility from the Host machine to repair your drive, or if you can get hold of DiskWarior or TechtoolPro, use one of them to repair the machine. It does sound, though, as if your power supply unit is failing which, being a hardware problem, nothing can fix except replacing it (and likely the logic board).

10.4.7. iMac 20" CoreDuo won't start any more

I did upload 10.4.7 yesterday together with iPhoto, iPod, iTunes (6.0.5.) and some other recent updates (altogether there were five, I cannot recall the last one). At first I did notice some “ticking” inside the iMac (2.0 GB RAM) every now and then, let’s say few minutes apart. That has never been heard before. Then this morning I noticed that iTunes was very slow. I did add few of my cd’s, and when attached the cover photo to the lower left corner the iTunes did update it very slowly, I think it took 1-2 minutes to add a photo to 12-15 songs. Then I did call Apple support (case #653790xx). The call took over an hour since everything I did on my computer was like slow motion. We did use DiskRepair and looked at the Console. When restarting the iMac it took several minutes, and when using safe re-start (shift on after re-start) the OS didn’t recognize my bluetooth keyboard. Then I was given advice to reload 10.4.7 from Apple’s site and install it again. Also I was asked to do Hardware Test (from install DVD). When I did try to re-install 10.4.7 there was an error after 71% uploaded, the installer asked to do that again. Then I did Hardware Test as advised, but there were no errors found (I did extended test with looping on and took several rounds). Next, when I tried to restart iMac from hard drive (Macintosh HD 10.4.7), it stopped repeatedly on Mac OS X window. Now I’m stucked, my iMac won’t start any more (I’m writing this by Windows machine, can you imagine?!)
I don’t know what’s wrong, but I have used Macintosh from 1987 (IIcx) and never, never before I have had these kind of problems. I suggest so far, that you take care when installing 10.4.7 on Intel iMac, I guess there might be a problem. I wonder why there is not email support for these kinds of problems and alert messages…? I’ll leave sailing tomorrow for two weeks and cannot report this by phone.
iMac 20" (CoreDuo) Mac OS X (10.4.7)

Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

I-Photo Won't Start Up

Similar Messages

Maybe you are looking for