I pick a phone number in contacts, it launches me to text

I pick a phone number in contacts, it launches me to text

Could you please be a little bit more descriptive with your issue?

Similar Messages

  • How do I add an extension to the phone number in Contacts.

    I want to add phone extensions to the main phone number in contacts.  How do I do it?

    From what I read, using a comma to separate the main number from the extension should work.  It inserts a pause, with each additional comma increasing the length of the pause.  So:
    4155551234,,3710484
    might be long enough for the automated system to pick up and reach the point where it'll accept the extension number.  If not, add more commas.
    Commas will also sync to your iPhone if you have one, and work as intended.

  • How do I stop my contacts old phone number from appearing when starting a new text message

    I changed one of my contacts phone number, but when I start a new text message their old phone number appears along with their new number. I have checked my contact information and only their new number is in there.

    No fix for that yet, take a look at this link, https://discussions.apple.com/thread/4363225?start=0&tstart=0

  • FW: [Adobe Reader] I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie

    What a dumb answer, the payment is done and charged already,
    ADOBE DOES NEED MY CREDIT CARD INFO ANYMORE, PLEASE REMOVE IT
    FROM YOUR DATABASE AS I CANNOT DO IT MYSELF.  It is quite annoying
    to be controlled like this, please confirm that my request has been answering
    with intelligence please.
    Lucie Lévesque
    Date: Mon, 8 Dec 2014 08:09:59 -0800
    From: [email protected]
    To: [email protected]
    Subject:  I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie
        I want my credit card information to be removed from Adobe's file and I can't find a phone number to contact someone in your company, how come, please help!  Lucie
        created by Bernd Alheit in Adobe Reader - View the full discussion
    Adobe needs the credit card information for the payments.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6995243#6995243 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6995243#6995243
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

    Adobe Reader is a FREE program, so you would not enter a credit card
    If you have a subscription to a PAID program, removing your credit card information would cause that program to stop working when you stop paying for your subscription
    If that is what you want, here is the information on how to cancel
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • How do you capture an answered phone number in contacts ?

    How do you capture an answered phone number in contacts ?

    When you look at your call history in the phone app, you see the number that you want to add, and press on the small right arrow on the right. It will show you a new page where you can simply create a new contact or add it to an existing one.

  • All calls received come in as "unknown" with no phone number or contact name from my address book?

    All calls received come in as "unknown" with no phone number or contact name from my address book? This started to happen after returning from being overseas.

    It was a caller id feature accidentally turned off when I I changed my account when returning to the US

  • HT2486 How do you enter an extension to a phone number in contacts?

    How do you enter an extension to a phone number in contacts?

    From OSX daily:The easiest way is through your iPhone or add a semicolon ";" NOT a comma in Mac Address book .
    Though you’ve long been able to add automatically dialed extensions to contacts on the iPhone, the newest versions of iOS handle extensionsmuch more intelligently, allowing you to create a “Dial Extension” button to any specific contact. That extension dialer can be activated manually, making the navigation of telephony menus infinitely easier, here’s how to quickly add this to a contact:
    Open Contacts and tap the contact name to add the extension to, then tap the “Edit” button
    Tap the phone number entry, place the cursor at the end, then tap the “+*#” button to access additional options
    Choose “wait” then enter the extension afterwards, it will add a semicolon and the extension afterwards to the address appearing like so: 1-888-555-5555;123
    Tap “Done” and exit out of contacts
    Now dial the contact to discover a “Dial 123″ button has appeared, tap that whenever you want to dial the extension
    The extensions can also be added from a Mac in Contacts (Address Book) by adding a semicolon to numbers followed by an extension, just be sure to sync it through the same iCloud account or it won’t go over to the iPhone.
    Anyone who frequently uses extensions to reach specific people at an office, or anyone who has battled an automated phone system knows how useful this can be. You can even set a string of numbers, though the Dial button remains the same.

  • I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

    I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

  • I changed my phone number and people are still able to text me from my old number and i can no longer send picture messages, what should i do?

    i changed my phone number and people are still able to text me from my old number and i can no longer send picture messages, what should i do?

    Workable solution found here:
    https://discussions.apple.com/thread/1589996?start=15&tstart=0

  • How do I add an extension to a phone number in Contacts 7.1?

    Now that the perfectly servicable Address Book has been replaced by overly complicated Contacts 7.1 in OS 10.8.3, I cannot add an extention to a telephone number. A phone number with an extention ends up looking like "4155551234ext3710484". Creating a new field named "ext" doesn't help, as any number entered into this field that is longer than 3 digits is autoformated to a phone number. Some of my contacts now have 6 digit extensions!
    Contacts Help is no help whatsoever. Very frustrating.

    From what I read, using a comma to separate the main number from the extension should work.  It inserts a pause, with each additional comma increasing the length of the pause.  So:
    4155551234,,3710484
    might be long enough for the automated system to pick up and reach the point where it'll accept the extension number.  If not, add more commas.
    Commas will also sync to your iPhone if you have one, and work as intended.

  • E72 - How to format the phone number on contact

    I can't figure out a easy for formatting my contact number to be like (xxx) xxx-xxxx or xxx-xxx-xxxx on e72 instead going to outlook make the changes and re-sync again. I find xxxxxxxxxx hard to read. I thought I found out how to add hypen "ctrl+(" but that basically long dash rather than short dash which you get an error if you try to send message with the phone number having the long dash. It is fine when you call. It is smart enough to strip out non-numerical value. But it is sms is not smart enough to remove it.

    ozidug wrote:
    The sad thing is that there is an international standard for phone numbers (+xxx) xxx-xxxx which everyone ought to recognise and use. It allows localisation and shortened dialling, but Nokia just want a number string. It's just lazy on thepart of the programmers; since it's a standard, they should have developed the program code once and just inserted it into every phone they produce, and that's not hard.
    A poor reflection on Nokia, I'm sad to say.
    AFAIK the international standard for telephone numbers (E.164) does not say anything about using spaces, dashes, or brackets in a telephone number.
    This may of course make it more "human readable", but claiming that what you want is a standard doesn't make it a standard, and I don't think Nokia (or any other phone manufacturer) should/could implement every single user-specific wish...

  • Phone number, not contact name, appears for new iMessage notification

    I am currently in Israel and using an Israeli SIM card with my iPhone 5C. I have unlimited data so I was told I was able to use iMessage. I am having an issue when talking to just one person. When I receive the banner or lock screen notification that I have a new message from him it just displays the phone number (area code and seven digits, no 1 or +1 or anything). Then when I swipe or tap to view the message it automatically brings me to a new message screen "To" his phone number (also the phone number is showing up green even though it is an iPhone). When I cancel the new message and am then in my Message app and viewing all my conversations, the new message is there under his contact name that is saved in my phone... And messages are blue etc. in our conversation. His number is saved with a +1 in my contacts as I am abroad and the contact name was appearing in my Messages. When I removed the +1 from his contact the phone is not recognizing him in my messages and just shows up as the number. This is very very frustrating. Please help! Thank you.

    this issue corrected itself 2 days later, the power of prayer!

  • Dial a phone number in contacts with a prefix adde...

    I would like to automatically add a prefix of 4 digits to the phone number when I make an IDD call. Can someone advise how to configure N95 to have this feature.
    Thanks!

    19-Aug-2007 06:29 PM
    firenze2153 wrote:
    open the contact in your phone book > options > use number > edit > enter the 4 digits and call
    I am in china and need to add the IP calling code 17909 and it is trouble to save new tag for each phone number i use nokia 9300i and would like to know how to add the callin code
    all my address book is with +country code and dial code
    i travel to hk also where calling code is 001 and in china calling code is like india which is 00 an the plus is realced by 00 or 001 but in phones of many other countres i can see that the code can be replaced by any presaved number in the mobile phone
    if the same principle work in nokia please tell me about it other wsie we must give this suggestion to nokia as in todays day where we travel a lot it is very difficult to change number as once changed we ahve to change abck again if need to send sms form same country
    moreover there are more than 1800 numbers in my address book

  • Generic phone number in contact data

    Hello,
    I use a iPhone with lates iOS (7.1.2).
    Sometimes I get e.g. a call from a company employee which is not in my contact list. Now, I, want to create a 'generic contact' with the Company phone number but without the Extension. Instead of the Extension number I like to write a '*'. With this I would see at least which Company is calling me, even I don't saved the actual Extension number in my contacts.
    Is this already possible? I tried, but I don't found the way.
    If it's not possible, where to send a feature request? I think this feature would be helpfull for many people and you can extend the scenario also to just a city prefix and so on. The in the contacts saved number which match best, should be shown as caller.
    Eddy

    Hi Dipkumar,
    I think there is no call target in particular compaign. However if there is then I think it will dial the phone 2 by default.
    PDI helpdesk told me that I have to use skip next to dial then second number.
    BR
    Appreciate your response

  • Adding new phone number to contacts in address book on IOS4

    Has anyone else come across those bug? When I try and press the add symbol to add a new phone number or extra number ie. Home or work as the default in new contact is mobile, the + symbol doesn't respond.
    So infuriating for such an essential app. For the most my upgrade is ok although a few apps now don't open.

    I see a number if the number of cards in the group more than fills the page. However, if there are blank lines on the page, there is no number.

Maybe you are looking for

  • Drill up functionality in obiee10g and 11g

    Hi, Is Drill up functionality there in obiee?If so can any one tell me how to implement this?

  • Not able to find saved WEBI reorts in BO 4.0

    Hi, I am experiencing weird Web Intelligence 4.0 behavior, I have upgraded report from BO 6.5 to BO XI 4.0 but now am not able to edit report, Edit option is available but when click on it then it doesn't opens edit window. Also same report when i tr

  • How to insert data into a table from an xml document

    using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt. if i use the xmlgen.insertXML(....) requires a CLOB file, which i dont have, only the xml doc. Cant i insert directly from the doc to the tabl

  • Office 365 crashing on C:\Windows\SYSTEM32\D3D10Warp.dll

    Hello experts, I am having problem with one of our office laptop. The user has an office 365 installed on windows 8.1 pro 64bit. Recently the user is unable to run any of the office 365 any longer . When I looked at the Application log the following

  • Sim card tray stuck might be broken

    Hi, i just bought an iphone 3gs and the sim tray got stuck because i put it the wrong way and when i took it im scared i might broke something because now it doesnt read my sim card.. I dont know if the warranty covers my stupidy, should i try apple