I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.
i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.
I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/
Similar Messages
-
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!
Hi Novagurl2369!
I have an article for you that can provide some helpful troubleshooting steps to address your issue:
No sound through stereo headset1
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?
Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers. -
I am trying to log data from 4 voltage input signal using labview, but when i use DAQ assiatant i am able to log data from one signal at a time only.I am trying to get all 4 input data to logged in a single file againt time. I am new to Labview, I need to sample this data within a couple of days can someone help please.
Naveen
Check out the info in the Analog Input section of the document linked below. (Ignore the part about Global Channels.) In Figure 5, notice that you can select multiple channels while holding <Ctrl> or <Shift>.
Developer Zone Tutorial: NI-DAQmx Express VI Tutorial
Kyle B | Product Support Engineer | ni.com/support -
hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder. renamed the photos starting with 1 and ending 262. thinking that would save the photos in order. Each time I try to export them that are placed in original folder names and descriptions need help.
This is a two part process. First we title the photos, then we export them, using the title as filename.
To title them
Once you have then in the order you want select them all and go
Photos -> Batch Change. Select set 'Title' to 'Text'
Choose a Title -> Graduation 2013 or whatever, then check the box at 'Append number to each photo.
Now, in the Album all your photos are named... Graduation 001, 002, 003 etc
Next Export them:
File -> Export, and in the Name option, choose 'Title as Filename' and complete the export.
Regards
TD -
I tried to uninstall cs3 by going to adobe installers under Utilities, but when I click on it, it says the file cannot be found. Any ideas?
Try running Adobe Cleaner tool once :
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordi on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleaner Tool.zip
Check for CS 3 option and remove it.
Note : Do not select Clean all option, it will remove all Adobe apps installed on your computer. -
My digitizer is not responding however i have loads of iMessages which i can see because the lcd screen is visible but touchscreen is brokenI tried to go onto my ipod touch to look at them but when i looked it had not been signed in to iMessage which was after i received the iMessage on my iPhone . Is there a way i can get imessages sent to iPhone which i currently cannot access due to the touchscreen being unresponsive to load on my iPod iMessage which is connected to my phone number as well as my email?
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get my library out of the cloud and keep them on my computer so they are available when I want them? Wow.......why have you made everything so difficult now?
SKF5656 wrote:
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back.
No you didn't.
Now everything is in the cloud
Except for anything you did not purchase in iTunes Store.
Only you iTunes purchases are in the cloud.
Reada the article that brenden dv posted to copy your iTunes library to new computer. -
I can no longer add to my calendar on my iPad but it appears on my phone only.
I can no longer add to my calendar on my iPad but it appears on my phone only.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Suddenly I can no longer see any entries I've made in my calendar on my iphone 5. Everything still shows on my ipad but not on the phone. I LIVE by this calendar. Help!
Hi Tammy56,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999?viewlocale=en_US
Cheers,
- Judy -
Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?
when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN -
So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
BryanI am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .
Maybe you are looking for
-
XMl parser version problem for running struts project in jdeveloper 10.1.3
Dear All. I am trying to run a struts (v 1.2.9) based project in Jdeveloper 10.1.3.1.0.The struts version in Jdeveloper is 1.1. when i am trying to run the index.jsp i get an error: org.xml.sax.SAXNotRecognizedException: http://apache.org/xml/feature
-
XML IN/Out via mod_plsql
Hi, how can i get an xml-datagram using the mod_plsql cartridge ? Output is no problem (using http.print and the xml-packages). :-) But Input is only possible by using a cgi-variable witch contains the whole XML-datagram. :-< Is there a posibility to
-
Problem compiling Coin3D from AUR
I'm trying to build coin for the freecad package and I am running into what looks like some kind of conflict with freetype. I have extra/freetype2 2.4.11-2 and extra/libxft 2.3.1-1 installed. I just did a full system upgrade this morning before tryi
-
Cannot find any information on property in a bean of type mypackage??
Hi I got an error org.apache.jasper.JasperException: Cannot find any information on property in a bean of type mypackage. I tried to find the solution and found that I need to use the naming convention so I fixed it. But I still got that error. Pleas
-
Hi, I support an application. Which was on CF5 and it has been migrated to CF7. In this we populate some information on a PDF using active pdf. We use a "SetFormFieldData" . Syntax is like - pdf.SetFormFieldData("field" , "value" , -998) This field i