I plan on using 2 Airport expresses to extend my wifi in my home. Do they need to be on seperate channels?

I would like to use 2 Airport Express base stations in my home to extend my wifi.  Do they need to be on seperate channels?

Yes - everything has to be the same to have a true roaming network - any wireless device that has the network info preset will recognize the coverage from the strongest signal as you roam however there may be a lag in seeing the signal strength actually change while the device refreshes itself

Similar Messages

  • HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

    I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

    This AirPort Express:
    http://www.apple.com/airportexpress/
    It is the only Express with 2 Ethernet ports. All others are "old"
    Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

  • Can I use an Airport Express to extend a network using a Bwrg500 router?

    Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router? The Bountiful wireless router has the WDS abilities.
    http://www.bountifulwifi.com/Products/BountifulRouter500G/Overview.aspx
    Thank you for looking.

    It is in fact possible to extend your network using WDS. I say this under the assumption that your statement regarding the WDS capabilities of the Bwrg router is correct. However, keep in mind that you cannot use a WPA or WPA2 password with a WDS extended network. You must either use no encryption or use WEP. Unfortunately some routers require WEP passwords that use either 10 or 26 digits ONLY while the express uses a 13 digit password.
    This can be a troubling problem considering that most people need a wifi password to ensure safe and secure browsing.

  • Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

    Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network?  I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
    Thx! ACB

    Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
    It would be extremely unlikely that the Express could do what you want, but some things are never known until  you try.

  • Can I use an Airport Express to extend coverage for Apple TV

    I hooked up an Apple TV today to replace my Airport Express. Is it possible to use the Airport Express to extend coverage throughout my house for the appleTV, or are they not compatible in that sense?

    Will the ATV work as far as the wireless signal goes? Basically, I can walk halfway through my backyard and them my itouch will cut out. I want to be able to control music (as I do inside) with my Itouch throughout my back yard, and my thought was to put the AX in a location closer to where I would use my ipod outside in an attempt to increase the wireless range.
    I just played with the settings on the Airport and switched it to "enhance an existing wireless network." Tomorrow I'll try to see if this helps to accomplish what I am setting out to do. If anyone has any feedback, by all means share it.

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • Tried to use my two airport express to extend my wifi network on a windows pc but no success

    Tried to use my two airport express to extend my wifi network on a windows pc but no success

    My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
    Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
    Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
    Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
    The key is to have both AXns configured as follows:
    As a bridge.
    Each having a unique Base Station Name.
    Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
    Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

  • How do I use my airport express to extend the wireless range of my NETGEAR 7550?

    I am trying to extend the range of my Netgear 7550 using the airport express.  When trying to set up the airport express it said that I was unable to extend the Netgear.  Any ideas how to make it work?

    You need to configure a roaming network.
    Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
    http://support.apple.com/kb/HT4260

  • Can I use an Airport Express to extend wifi w/o TC?

    Hi-my setup is this: I am using an Linksys modem and an ASUS router. I have a new Time Capsule but I am only using that for Time Machine backups. My wifi signal is weak upstairs and I was wondering if I could put an Airport Express up there to extend my network.... Remember that my TC is not being used as a router. I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work? Thanks for the help!!! Judy
    PS-I have a MB Pro running the latest version of Mavericks, an iPhone 4S and a 4th Gen iPad. 

    I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work?
    An AirPort Express could extend the wireless signal provided by another Apple product, in this case the TC, but since the TC is not being used this way on your network, the Express would be of no value to you. It cannot wirelessly extend the signal provided by the ASUS wireless router.
    Check with ASUS support or an online forum for suggestions on a repeater or extender that would do what you need.

  • Using wired Airport Express to extend wireless network

    Hello,
    I am considering getting an Airport Express to extend my wireless network in a part of my house where it's really weak.  The room I want to use it in actually has an Ethernet network drop and it is connected to my Airport Extreme on the other side of the house. 
    I've looked at the manual, and the only example it gives for extending a network is wireless.  Since the network is very weak where I want to use it, I was wondering whether I could use the Ethernet port for the incoming signal.  Is that possible?
    I have an older AX (the b/g model) that I use in a similar way: it's on an ethernet port, but it broadcasts its own, different (slower, since it's the older model), wi-signal.  So I didn't want to do that: I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
    Has anyone else had a similar experience and if so, could you let me know if this is possible?
    Thanks!

    I was wondering whether I could use the Ethernet port for the incoming signal.  Is that possible?
    Yes
    I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
    Configure the new AirPort Express as follows using AirPort Utility - Manual Setup
    Click the Base Station tab located below the row of icons to assign a name to the Express, a device password and adjust Time Zone settings
    Click the Wireless tab and configure as follows:
    Wireless Mode = Create a wireless network
    Wireless Network Name = Exact same name as your AirPort Extreme network
    Radio Mode = 802.11n (802.11b/g comatible) is a good general choice
    Channel = Automatic
    Wireless Security = Exact same setting as the AirPort Extreme network
    Wireless Passwrod = Same password as the AirPort Extreme network
    Confirm Password
    Click the Internet icon
    Click the Internet Connect tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Update to save settings and allow the Express to restart
    Very important...power down the entire network...all devices....order is not important
    Wait a few minutes
    Start the modem first and let it run for a few moments by itself
    Start the AirPort Exreme the same way
    Start the AirPort Express the same way
    Start other devices one at a time about a minute apart
    You now have what is known as a "roaming" network. Computers will automatically log on to the router with the strongest signal as they "roam" around the house.

  • Problems using wired airport express to extend airport extreme wifi

    I've followed the instructions in this community to use a wired airport express to extend an airport extreme wifi network.  Here is the issue I'm having.
    The airport express wifi network has the same name as the airport extreme wifi network.  So far so good.  My laptop will pick up the airport express wifi in my office, and the airport extreme wifi in the other part of the house without any problems.
    However, where the signals for the two overlap, my laptop will often latch on to the weaker wifi signal (I can tell by the number of bars) and my connection speed slows down significantly.  Since both airports have the same wifi name, I can't manually switch it to the better signal.
    Has anyone encountered this and have suggestions?  My only solution was to give the two separate wifi names so i can switch manually, but this is an inelegant solution.

    Hey dude, i'm having the same problem and i didn't find a proper solution for it, appart of creating another network as you said.
    Its weired  cuz in my case only the small things doesn't connect to the new router(using 2 airport extreme's) such as the iphones ipods and apple tv, but my mac did it great change the signal all the time i went from the basement to my room. So i just create another network and for me it wasn't a big deal to change it all the time i go to the basement, even more when use a mac.
    I know thats not the point when you have two wifi routers, but you know it's tolerable.
    Greetings!

  • Using an Airport Express to extend a Verizon wireless DSL router? (Westell)

    We recently switched our internet service over to Verizon DSL. The router they gave us is a wireless router. We have the Verizon network setup for both our computers to access it, but I wanted to use our Airport Express to connect our printer wirelessly and to extend the network. However, I can not get the Airport Express to join the Verizon network. Can anyone help with this? All I am getting is the blinking amber light on the Airport Express. I know the Verizon Westell router has its own WEP settings, which I have tried to give to the airport express, but it does not seem to be working. Very confused!!

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Westell router can be extended wirelessly with the AirPort Express Base Station (AX).
    The few non-AirPort brands that are known to work are:
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54

  • I can't use my Airport Express to extend a non-Apple wifi router's signal?

    I just bought an Airport Express at the Apple Store, and the genius I asked there told me I could use my Express to extend any wifi router's signal, even if it isn't an Apple product.
    We currently have a weak wifi signal upstairs in our home, and I'm hoping to improve the signal.

    the genius I asked there told me I could use my Express to extend any wifi router's signal, even if it isn't an Apple product
    Unfortunately, the "genius" is wrong if you are trying to "extend" using wireless only.
    As far as we know and have tested with many different products from other manufacturers....the Express will only "extend" another Apple router.....an AirPort Extreme, Time Capsule, or another AirPort Express.
    Another way of saying the same thing is that it is likely not possible to extend a wireless network...using wireless only...unless you have two Apple routers.

  • Using an Airport Express to extend my network range

    Dear all
    I live in a three storey house, my broadband modem/router is on the first floor and my Mac is on the third.
    I noticed that I kept losing my internet connection and the guy in the Apple shop recommended that I buy an Airport Express to extend the range of my current wireless network (and thereby achieve a strong connection on the third floor).
    I have bought the A. Express and my question is, do I need to plug my A. Express into the router or can I simply plug it into a plug socket on the third floor (with nothing wired up to it)?
    What is the best way to extend my wireless network range?
    Your help is greatly appreciated. I have read the user manual but it is not clear on this point.
    Thank you

    Dear Bob
    Thank you very much for your prompt response.
    No, unfortunately the Apple guy did not explain that I needed an Apple router/modem in order to extend my network range with the AirPort Express - how disappointing. I will return the product and look for an alternative.

  • Using apples airport express to extend a linksys wireless network

    HI there,
    Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how? 

    So the concern that you expressed regarding to that if the apple airport express is N technology kind of extender then it may extend a linksys wrt120N wireless network... But before configuring the apple airport express try upgrading the firmware of the Router and then reset the router.....
    After resetting the router power cycle the whole network and configure the Router again as per  ISP ( Internet Service Provider ) setup...

Maybe you are looking for