I played an audio cd - it will not eject

i played a cd - it will not eject. i dragged it to trash, i hit the eject button on the keyboard - i went to finder, there was no eject icon next the the audio cd - i went to file and down to "eject cd" - i restarted the imac with the mouse button down and then repeated the above all to no effect. how do i get the cd to eject?

Check you aren't doing anything to make it invisible:
https://discussions.apple.com/docs/DOC-1015

Similar Messages

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

Hello there, tomazdes.
The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Particularly:
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

Songs are showing up and playing fine in iTunes yet will not sync to my iPad it is a selection of songs by the same artist, all gone?

Songs are showing up and playing fine in iTunes yet will not sync to my iPad it is a selection of songs by the same artist, all gone?

Try Missing Artist or Album not with others by same artist
tt2

While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

Hi there Sing Me A Song,
You may have changed the Up Next list in iTunes. Take a look at the article below for more information on the Up Next lists and how to edit it.
iTunes 12 for Mac: Play songs
-Griff W.

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR?

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR? The Apple store is a two hundred mile one way trip.

I didn't imply anything; I simply explained the terms of the ToU here because you had not specified what you were trying to do. Most such related questions are about copying protected content and I would not appreciate having my post removed with the obligatory email from Apple because I violated the ToU. In any case, you can find dozens of threads googling (or here) about the newer burners being slow copying content if it is protected. FWIW, if the DVD was produced by a commercial outfit, they may have used some sort of protection or an unusual file format - that problem has been discussed here previously.
As for your slow burner - since we don't even know what type of Mac/model/year/OS you have, it is impossible to guess. If it's an iMac, those vertically installed burners are known to be less than perfect; the horizontally installed versions are better, but still not as good as an external. I've used an external burner for years.
As for the conversion time: the burner should have nothing to do with that; it is your software and your Mac's processor and amount of RAM that matter for conversions and rendering. I have no idea what you are using to burn the DVD. And, as a last consideration: you should always burn your content at a slow speed so you can avoid burn errors and have better results.
Good luck.

DVD will not eject

A DVD in the slot-loading drive will not eject. My iBook reads the disk as it appears on my desktop and I can play the DVD. But as soon as I hit the eject key (F12), it makes a weird sound, like it's trying to eject, but the DVD will not eject. Can some one tell me what I can do? I have tried all the normal procedures, like holding the track pad while starting up, doing the Firmware thing at start-up, etc... All I get is the weird spinning sound, but no disk ejected. Please some one tell me what I need to do. Thank you in advance!

When open firmware doesn't work, it sounds like a hardware problem with the ejector. I would take the machine into service and let them know you tried the open firmware method.
In the future be sure to follow this link as far as the allowed optical media on slot loading drives:
http://docs.info.apple.com/article.html?artnum=58641
And note that disks which have been written on by sharpie or other type of pen, or a sticky applied to them can cause the drive to age prematurely. Always buy media in jewelcases by known reliable vendors. For CD that's Verbatim, Kodak, Imation, and Sony. For DVD check http://www.videohelp.com/dvdmedia/

DVD Will Not Eject, iDVD Restarts Itself Over and Over

I have a DVD that simply will not eject itself no matter what. Instead, it starts to eject, then iDVD starts up, and begins to play the DVD. I have unchecked "Start DVD" in iDVD's preferences and reviewed the forum articles about stuck DVDs. Reboot does not help Safe Boot does not help. Restart wth right mouse button held down does not help, perhaps because my mouse is Apple and there is no Right Mouse Button?
I'm not about to enter terminal commands because I have no idea of what I'm ding at teh system level. Any ideas?
Thanks if you can help, Signed:
Desparate in Va.

HI,
Try restarting your iMac while holding down the eject key.
If that didn't help, open Disk Utility (Applications / Utilities).
Select the disk on the left side of the window then click the Blue eject button in the menu.
Carolyn

Optical drive will not eject

My Satellite A205-S5814 optical drive will not eject when I press the eject button.
Before this problem started, the drive would eject, but sometimes a blank screen would immediately appear after the tray ejected and then the computer would restart itself and give me the option of restarting in safe mode.
Please let me know what may be wrong.
Thanks.

Your machine is booting into a Windows partition.
Apple does not support Windows. They do provide "Boot camp" which allows a knowledgeable person to install XP in a drive partition on a Mac.
However "boot camp" still in "beta" status and some of the keyboard mapping is not the same as a Windows PC, because it's a Mac, not a PC.
Mac's come with Mac OS X standard, not Windows. The copy of Windows you got on the machine was likely put there for demonstration purposes, not for sale. If you know how to hack Windows, I'm sure you could bypass the admin password, that's a "store trick" to sell a product with a illegal copy of Windows.
All Mac's will open the c.d. tray if you reboot holding the mouse button down with a wired keyboard.
You can also reboot again holding "option key" to select a drive partition to boot from, there should be a Mac OS X and a Windows partition, however it's possible the Mac OS X partition was erased.
You can stick the Mac OS X installer disk in the c.d. tray, close it and reboot holding "c". It will boot off the disk. There you can select Disk Utility from the Installer menu and Erase w/Zero the internal hard drive. When finished Quit and install Mac OS X Tiger. Your "store copy" of Windows will be gone of course.
If your unfamiliar with Mac's, Mac OS X, "Boot Camp" with Windows, I suggest you have someone help you. Your in very deep too early in your learning curve.
You'll really need to learn Mac OS X first, then you can play around with "Boot-Camp" and a legal copy of XP in a drive partition.
With Mac OS X your machine will be very safe from internet threats, but when your in "Boot Camp" under XP, your just like any Windows PC, completely vulnerable.

Hello my name is Tyesha Woods,and I have a problem with my dvd hard drive, it will not eject my cd no matter what i do can you please help me?

Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?

Hi Tyesha,
Your DVD won't eject?
Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop.

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

We have a DVD in the super drive that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

We have a DVD in the super drive on our Macbook Pro that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801. Hope this helps

Optical Disc will not eject

I recently installed Leopard on my Macbook and forgot to eject the optical disc.
I just tried to eject it and it will not eject. I used every method to eject a DVD that I could find. The drive makes the usual eject sounds but nothing happens.
I viewed the slot in the side of my Macbook with a flashlight. I have no idea if this is normal or not but there seems to be a cardboard barrier blocking the slot. The cardboard barrier has a thin line across the middle from one end to the other.
I've read this dicussion topic and found nothing like this problem.
Thanks to everyone for any advice.

Functioning optical drives don't act like that, so it sounds like you have an optical drive that has failed. I would suggest calling Apple (800-275-2273) and having them set up a repair. Mail in repairs can often be completed in under a week.
Best of luck.

External hard drive will not eject

Since upgrading to ML my small "my passport" hard drive will not eject. First it gives me the message "the disk couldnt be ejected because Safari is using it and to close Safari and try again". (not sure why safari would be using it..) When I close safari then I get the message " the disk couldnt be eject because another program is using it"
My only option is to force eject each time.
Any suggestions?
Thanks
Susan
Mid 2011 15" macbook pro

Have you updated your "My Passport" software lately, there have been recent updates for Mountain Lion issues: http://community.wdc.com/t5/News-Announcements/bd-p/Announcements
http://community.wdc.com/t5/News-Announcements/Software-Update-WD-SmartWare-Upda te-1-3-4-x-for-Mac-Users-7-26/td-p/444122

I played an audio cd - it will not eject

Similar Messages

Maybe you are looking for