I plug in my iPhone so I can sync it with my computer but nothing pops up. How do I sync it?

I plugged in my phone as usual and normally it automatically starts to sync but this time it didn't. I have no idea how to manually sync it. Please help. Any suggestions would be nice. Thanks!

Not Sync. There should be a button at the top of iTunes on the right:
It would appear in the space above if an update is available. This is at the upper part of the iTunes Window on the right after you select your device from the sidebar.

Similar Messages

  • HT2736 How do i just send a song, not a hole album from my itunes on my iphone. You can do it from my computer but not my iphone.

    How do i just send a song, not a hole album from my itunes on my iphone. You can do it from my computer but not my iphone. Please help. if there is not solution then someone should fix this!

    It's not currently possible to gift a single song from an iOS device, you can only gift albums.
    If you want to leave feedback for Apple (these are user-to-user forums) then you can do so via this page : http://www.apple.com/feedback/iphone.html

  • I've brought a charger cable from tesco for my Iphone 3gs. 3 weeks later it stopped working completely with no notification. I tried with my computer but nothing seemed to happen when I plug my phone in. Help!

    Where should I buy legitimate charger cable? Is my cable third party as I brought it from Tesco?

    If it is an Apple cable it should have come in a white Apple box with an Apple label. If it didn't it is not an Apple cable. You can buy Apple cables at any Apple store or Apple's online store. There are also high quality cables from some of Apple's business partners such as Griffin.
    For a 3GS most cables should work, Apple or not. This is not true for the iPhone 5 and later. So the problem may not be the cable; inspect the connector on the bottom of the phone; if it is full of lint, dirt or moisture try cleaning it. Also look for bent pins.

  • HT1212 I cannot remember my iphone passcode, and i reset it with my computer, but it still says that i need a passcode to get into it.

    I just recently got an iphone and put a passcode on it and i forgot the passcode. So i went online and reset it and did what the website told me to do. But it is still requiring a passcode.

    There are two things to try. If the first thing you try fails, try the next.
    Two Button Reset.
    This is the least likely to result in loss of data.  Read that again, especially the phrase "least likley."
    Unplug the iPad from the computer.
    Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
    When you see the logo, let both buttons go.
    If this worked, you should see an icon instructing you to connect to iTunes.  My guess is that the reset did not work.
    DFU Restore
    This will very likley result in loss of data.
    Plug the iPad into the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you 've never done a DFU, it may take about three attempts to get the timing right.

  • HT201263 when will my phone be unbricked or when is the next ios update available so i can try restore with the update but i dont see how it would work anyway, seeing as my phone cant even turn on after the apple logo is displayed

    hello people......
    ohkay.... so my iphone decided to turn off on me while i tryd opening the app. clash of clans, and when i turned it back on, it displayed the apple logo for 10 - 15 seconds on the screen before fading out and shutting down. i have tryd all recomnded steps and none have worked. my itunes detects my phone in recovery mode, but after retrieving all necesary data for the restore process. when itunes prompts waiting for iphone, the apple logo is dsplayed on the screen for 10 - 15 seconds and then fades out and shuts down... has anybody found a fix for this problem?

    It's quite probable that your iPhone has a hardware problem. Contact Apple Support or make an appointment at an Apple Store and have your iPhone evaluated.
    Regards.

  • Can't pair with my computer via bluetooth for tethering

    Hi all, please help me.
    My iPhone 3G(16G) can't pair with my computer (window vista home premium) for tethering although i updated to OS 3.0. The bluetooth is only showing "Searching..." for about 15 mins. I only get internet tethering via USB. So, what is the problem? Can i make tethering via bluebtooth? Which settings will i need to set up? pls. thanks all.

    Hi, Guys,
    Yes, There is problem for this.
    Please see this link.
    http://support.apple.com/kb/TS1559
    also
    http://reviews.cnet.com/8301-19512_7-10285817-233.html?tag=mncol;title
    There are 4 way to try to fix. I will try and if anyone fixed OK please report for us.
    Thanks.

  • I plugged in my iphone 4s into my mac book to dowload pictures but itunes nor iphoto came up. i manually opened them and my iphone wasent on there. how can i fix this?

    i plugged in my iphone 4s into my mac book to dowload pictures but itunes nor iphoto came up. i manually opened them and my iphone wasent on there. how can i fix this?

    dfsadfdsfsdf wrote:
    Iphoto will not reconize a iphone 4s if it is iphoto"9 or lower
    I'm running iPhoto '09 (8.1.2) on my MBP running Lion and it recognizes my 4S without any problem.

  • HT1296 I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    Since the release of Mavericks (OS X 10.9) syncing contacts and calendars with a Mac via iTunes is no longer supported. The currently supported method is via iCloud. Setup instructions: http://www.apple.com/icloud/setup/

  • I had my laptop that my iphone was backed up onto repossesed so now i have a new computer but i dont know how to put my music photos and video and apps on my new computer can somebody help??

    I had my laptop repossesed and it had all my bak up from my iphone 4 on it i have a new computer but i cant put all my pics vids apps and songs on my itunes i really need help with this because alot of the photos and stuff i have on my iphone are sentimental as are the songs which all havnt been purchased through itunes please tell me there is a way to do this??//

    Set the iTunes to prevent automatic syncing before you plug it in the first time. You should be able to extract any photos in the camera roll as you would from any other camera. You can transfer purchases to get anything you actually purchased from the iTunes store off the phone and into iTunes. Made sure you have at least 1 contact in whatever application you intend to sync contacts to. This will give you the option to merge them. If you don't, the phone will be overwritten with the blank address book from the computer.
    As for extracting anything else, media sync is meant to be 1 way only. Computer>iPhone.
    As for media that wasn't purchased on the phone, you can try a 3rd party program that 'may' be able to extract it, but this isn't sanctioned or supported by Apple in any way.  Technically, you're out of luck if you don't have a backup from the computer that was repossesed.

  • I plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old stuff from my G3s on my new

    i plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old information from my G3s on my new iphone 4. how can i reverse this? please help.

    Hi, raneth's boyfriend!
    Unfortunately, iTunes was told to restore all data from an old backup onto the new phone, and that cannot be undone.
    However, prior to this, iTunes 10 would have also asked to make a backup of the phone before doing the restore.  If the user elects to say "yes" to perform the backup, then iTunes would have backed up the phone before erasing it.
    Hopefully, that backup will still be available in iTunes, and if so, it would be backed up under the new phone's name prior to it being erased and restored (if the name of the new phone is different to the name of the old phone).
    To check if iTunes has a backup of the phone prior to the restore, look in the Devices category in iTunes Preferences.  All backups made are timestamped and are identified with the iPhone's name at the time of the backup.  Look for:
    • a backup of the phone using the new phone's name prior to the erase and restore, or
    • a backup with the same date and time as that when the phone was erased and restored (not the date and time AFTER when the phone was erased and restored!).  This may be the case if the new and old phones have the same name.
    If a backup is available, you can erase and restore again using that backup. The phone will be restored with what would hopefully be the original image of the new phone.
    If no backup was made prior to erasing and restoring the phone initially, then there is no way to
    undo it, meaning your phone's original data has been lost.
    --tonza

  • I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    Ask the Verizon store to exchange your iPhone for a different iPhone 4.
    UPDATE - Sure, try ckuan's solution first.  Then use mine if that fails.
    Message was edited by: sberman

  • HT201269 i am trying to restore my iphone but it is asking me for a password. i have tried my apple ID password and several others but nothing is working. how can i restore my iphone? is there anything i can do?

    i am trying to restore my iphone but it is asking me for a password. i have tried my apple ID password and several others but nothing is working. how can i restore my iphone? is there anything i can do?

    recovery mode
    open itunes on computer
    plug cable into computer not phone
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808
    if it says turn find my device off can be done at icloud.com or on the device settings - icloud - find my device

  • My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.

    My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT1212 I am tring to enable my ipod, i have done the right steps (plug it in, hold the home button down etc.) but nothing pops up on my computer to press ok, what else can i try?

    I am tring to enable my ipod, I have done the right steps(plug it in, hold down the home button, etc.), but nothing pops up on my computer to hit ok, what is wrong? and is there another way to fix this?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT1719 My itunes doesn't list "devices" above the playlist.  How can I sync the music I have purchased to my new ipod shuffle if it doesn't give me the option?  The shuffle is plugged into my computer, but nothing happens.  Help please!

    My itunes account doesn't list "devices" above the playlist, as the syncing instructions give.  How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle?  The device is plugged into my computer, but nothing happens.  Shouldn't the computer recognize the device? It doesn't.  Please help!

    As a test, shut down your computer and disconnect ALL USB devices.  Do this procedure to Reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop).  Run iTunes.  Connect shuffle to a direct USB port on the computer.  See if there's any improvement,
    If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power).  An iPod charges its battery while connected, so it is a high-power USB device.

Maybe you are looking for

  • Error message on printer

    An error message on my HP Photosmart Plus appeared when I inserted a new cartridge, the message is  Ink System failure Oxc19a0003 turnprinter off and restart.  I have turned it off 10 times and the message is still there. This question was solved. Vi

  • Editing in Photoshop Elements 9 (tiff and tif)

    Last week at the end I moved to Aperture. Now I've some problem when I edit with Photoshop Elements 9. I've setted Aperture to transfer a 8 bit tiff to photoshop now Aperture tranfer a .tiff file to photoshop and when i save (not save as) photoshop s

  • Acrobat ver 9.4.2 does not see my installed printers

    after the latest update Adobe Acrobat does not see my installed printers -   Adobe Reader sees them fine - this is creating a major problem for me as I now had to go in and mark reader as the default program - every time I try to print from acrobat i

  • Problem with SOAP Attachment in MM7

    Hi, I'm developing with Bea Weblogic 7 sp2 a MM7 server. My problem is when I add an attachment to SOAP message, Weblogic can't receive the message and say something as "The ID referenced by .... is unknow" but the href attribute in SOAP Message has

  • Problems with solitare purchase

    within the past week (or close) I tried to purchase the premium version of solitare. I filled out the payment page, etc. I did not get it. I want to make sure I am not billed for it. This makes twice I tried to get it, but it will not work, or so it