I plug in my "older" iPod classic 80 gig. It will not register on my Macbook Pro to show it is even plugged in??

I have not updated my iPod in a few years and usually have my iPhone 5 synching. I would like to update my music on my iPod - but it does not even register and I get a "bubble" coming up saying "USB DEVICES DISABLED - Unplug the device using too much power to re-enable USB devices"??? Anyone have any advice? I do not even see that it is in my devices on the Mac or iTunes....
Thanks in advance
Val

That can happen if the USB docking cable is faulty and is causing a short-circuit.  A short-circuit would draw too much power, and that message comes up.  If you have several USB devices connected at the same time, it is also possible that the total power draw of all the devices (including the iPod when you connect it) is too much for the MacBook's USB bus.  This is happening to protect the computer's hardware from damage.
You should try a different USB docking cable, or try the one you have with another device, to confirm it is not faulty.  Also, disconnect all USB devices from the MacBook and connect the iPod to a direct USB port by itself.  Because you got that message, you may want to shut down (power off) the MacBook and then start it back up.

Similar Messages

  • Ipod classic from 2005 will not conect to my macbook pro itunes

    I have an older Ipod that I haven't used in a few years. I tryed conected it to Itunes on my Macbook pro and I get nothing. I last used it with my old computer that used windows xp. I tryed using 4 different cables from my iphone and ipod touch. still nothing???? the Ipod classic 30gb is full with music and pics and works fine but I would like to update the music and remove the pics from it. anyone know what to do???

    Hey WhimsicalNightOwl,
    There are some troubleshooting steps in here that should help you out:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Some of the steps don't directly apply to your situation, but most do and running through them should help resolve the issue.
    Best,
    Delgadoh

  • IPod Classic 5th generation will not sync with new MacBook

    I have had a 5th generation iPod classic that I have been super happy with.  I have used it with several PC laptops.  Because I have gone through so many PC's, I decdied this year to get a new MacBook Pro.  Since my old PC was dying it took forever to get all my music and videos transferred to my new MacBook. Anyhow, I have had no luck syncing my iPod with my new MacBook.  I have read several other posts (but mostly older like 2007-2010) that others have had similar problems.  Here is a quick list of what I have done/what has happened:
    Initially, I would get one of two messages:
    'The ipod '(My Name) ipod' cannot be synced. An unknown error occurred (-124)'
    - 'The ipod '(My Name) ipod' cannot be synced. The required folder cannot be found.'
    Two times it told me I needed to use a USB 2.0 port (but I have a new MacBook and was using the newer 3.0 port).  I haven't seen that message since.
    It actually "transferred" over 4500 of my 7000 items (I have a ton of music that I use for my job) and then just stopped. When it was disconnected only about 200 songs were actually on my iPod.
    I've restored it several times.
    Seems to "freeze" on random songs or videos and will not continue to sync, even theough the iPod says it's syncing.  Then iTunes freezes.  I have to "force quit." Sometimes (but not all the time) if I try to re-open iTunes, I get a message that says iTunes is locked.
    I thought maybe my cable was bad (it was the original that came with the iPod).  I actually spent $20 and got a new one.  No luck. 
    With the new cord iTunes now gets frozen on the 3rd or 4th song it is trying to transfer. Once I disconnect the iPod (I have to disconnect with ejecting because iTunes is frozen and it also freezes up Finder to eject) my iPod makes an awful click sound and I have to start it by toggling and then holding the play/pause button.
    I have tried enabling disk, manually controlling music, etc. but nothing helps.
    I am sick about it because I rely on my iPod a lot for my job-- and I can't afford a new one since I just bought a MacBook.  I think it has something to do with the fact that I got this new MacBook.  My old PC was getting so sensitive that I didn't download the latest version of iTunes (but I still had the second latest version).
    Any help is appreciated.

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • Ipod Classic 7th generation will not sync with all movies in Itunes

    I just bought an Ipod classic today, due to my iphone 5 not able to connect to my car entertainment system and car stereo.  Needing a 30 pin to connect to it.  So I bought it, connected it to my mac computer, and not all the movie files will sync to it.  I get this message:
    For some reason, some of my movies will transfer to the ipod classic, and some will not.  They are all m4v files.  Does anyone have a suggestion?

    The files that won't copy probably have too high a data rate. From http://www.apple.com/ipodclassic/specs.html
    Video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    tt2

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • My ipod classic 80 gb will not sync contacts form Outlook in windows 7.  I have tried many suggestions but none work.

    My ipod classic 80 gb will not sync with contacts in outlook in windows 7. It never has synced all contacts but for a while it would sync "All Contacts" if I created a distribution group in Contacts for that purpose.  Now it will not even do that. What can i do ?

    Hi there,
    I would recommend reviewing the process for setting up syncing in iTunes 11. Take a look at the article below for more information.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    If the issues persist then you may want to take a look at the trouleshooting steps found at the website below.
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    -Griff W.

  • Does anyone know why my 2nd gen iPod calendars will not update from my Macbook pro starting as of Oct. 20, 2012? I tried restoring to factory settings and genius's did DFR type restore....no results.

    As of Oct 20, 2012, my calendars will not load from my Macbook Pro to my iPod. Tried resetting to factory settings and installing just my work calendar... unsuccessful. Genius at my Apple store tried a DFR (?) type reset... still no calendars. All other functions of the iPod is working fine. Any suggestions?

    10.8.2.  And I have been keeping up with updates, but I thought they all involved fixes to Logic Pro and Aperture (but there may have been an update to OXS...is there any way to see when fixes were released?) The Genius's at our store were stumped and told me to contact Apple.... but without Apple care, I will be charged a fee.... and my iPod is in pristine shape. Is there a way to request Technical support for a problem they are possibly causing?

  • Connect to car, IPOD Classic pauses and will not play

    Hello to all,
    First of all I am not very good at computer stuff. I used my IPOD Classic for about three months with a car kit and all was fine. All of a sudden it stopped playing. I figured out that the IPOD pauses when it is connected to the wire from the car. I have tried connecting it with the car off, on, radio off, on all with the same result, as soon as the IPOD detects the wire it pauses. My radio will only play the IPOD not control it. Any ideas?? This is driving me mad. I don't understand why it worked for months and then suddenly stopped. Thanks in advance for any help.
    Matt

    I'm having the same problem. I updated my ipod in itunes and now my car's usb deck will not recognize the ipod. It had been working for years without a problem. I emailed kenwood and they said apple pushed out an update that is causing compatibility issues with car decks. They suggested a "soft reset" which did nothing. Kenwood told me to contact Apple and Apple wants me to pay for support. Guess I'll surf around this forum till I find a way to revert back to an older version of the ipod software.
    Here's the thread from kenwood:
    Dear Mr. Lapteff,
    Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
    I understand you are having an issue with playing back your Ipod. If you recently updated your Ipod to the newer iOS4 software version we recommend attempting to soft reset the Ipod and attempt reconnecting to your head unit. The available updates from Apple have caused some issues with connectivity. For information on resetting your Ipod we recommend visiting www.apple.com.
    Please feel free to contact us again with any additional questions.
    Steve
    Product Support Representative
    Kenwood USA Corporation
    Area: Car & Home
    Topic: Troubleshooting
    First Name: andrew
    Last Name: lapteff
    Email: [email protected]
    Product Model: KDC-MP342U
    Zip/Postal Code: 19128
    Subject: Ipod won't play via usb
    Body: After working perfectly for years, my Ipod will not play on my KDC-MP342U for the last 2 weeks. The KDC-MP342U just flashes, "reading" but never syncs. I tried resetting and restoring my Ipod, but I still can't get it to work on my deck.
    Any help would be greatly appreciated,
    Andy Lapteff:)

  • 2005 ipod classic and it will not take charge in the wall or computer.

    Hello, i have a 2005 ipod classic. It wont take charge in the wall or computer. it only works with the car charger/player and before it works it take about 15 seconds to boot. when plugged in wall or computer it only says please wait very low battery and it will sit like that for hours. I've replaced the battery once before and it worked for a month then it started doing this again. is there any way to get it working by doing it myself?

    Replacing the battery is a rather delicate operation best left to the Apple techs.  If you do any damage Apple will not touch it or give any help, even on a device out of warranty.  It sounds like a new battery is in order.

  • My iPod classic 7th Gen  will not sync with my new computer. itunes is installed and updated.

    fellow iPod classic owners,
                                           the problem is a failure to sync with the new computer. the conditions are as follows: the new computer is a pc. it has the latest iTunes software installed. the iPod is installed properly. i'm fully recognized by my iTunes account. there is nothing lacking other than my iPod's refusal to sync with my new computer. what have i left undone? i could be suffering from a duh, but i'm not the only one. nothing in the apple world is as difficult as this one is, at least on the surface. if it were that simple an issue, no one would be having any problems with it. any more information needed can be provided by request. by the way, the computer being used has been authorized. that is a non-issue.
                                                                                                                 your help is appreciated,
                                                                                                                     hardphil.

    I believe the IPOD (Classic) uses USB 2.0,  and my new laptop uses USB 3.0.  I think they are not compatable because of this.  If you find a solution to this please let me know.
    Thanks,

  • Had to reset my ipod classic now itune will not recognize it, what do i need to do?

    I had a problem with my ipod classic, stopped before songs were finished, long pauses while it ran through songs on shuffle mode, so i reset it.  I finally got it back but now my i tunes will not recognize my i pod.  What do I need to do?
    BWM

    Hello Jeanne
    If you are having issues with your iPod not showing up on your computer then check out the article below. What you need to figure out is if it does not show up at all or if it is just iTunes.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Regards,
    -Norm G. 

  • IPod nano 7th Generation will not register in computer

    My iPod 7G has suddenly ceased recognizing any power source. The battery died I went to plug it in and neither the computer or iTunes would not even register that there was anything attached. When I tried to restart and do a hard restore, it would glitch and just continuously restart unless unplugged from power. I have not added any new files that could have altered it.

    Is the Enable Disk Use option enabled from under the iPod's Summary tab in iTunes? If so, disable it and then try restoring again.
    Sometimes simply rebooting the iPod and Mac can resolve the issue. To reset the Nano, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • Suddenly my ipod and iphone will not sync with my macbook pro

    sync was working until about a week ago with all of my devices (Ipod/iphone)
    Sync is now greyed out, and it says the sync will resume when the macbook pro is available.
    Why isn't it available now?
    can I manually make it available?
    thanks.

    Are yo trying to sync via wifi?
    If so:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    Otherwise try restoring from backup

  • Ipod Classic 80 GB will not sync to itunes, but is recognized by itunes

    I recently went to macmedics to get my ipod fixed i had broken the hardrive. they put in a new hardrive but when i went to sync my music it would only sync aboutm300 songs of my 23 GB of music before freezing the computer and throwing out error -53, -50, or 1303. so i googled a bunch of stuff, did the whole device manager thing and installed the right apple usb mobile device driver thing, didnt solve anything. uninstalled itunes, restarted comp., installed itunes again, same problem. so i decided to restore the ipod to factory settings, did so it downloaded some ipod software update and now whenever i click the sync button it completely ignores my command and reverts to the title of whatever song i am playing. any ideas of what i can do. i have a 1 year warranty with mac medics but i have a feeling they are going to tell me there is nothing they can do. if someone has an answer i'd REALLY appreciate it.

    after restoring it once again, it has also reverted back to only syncing up to around 400 songs before getting stuck on a track for half an hour before telling me it cannot sync the ipod.

  • HT4437 Airplay on apple tv works from my ipod touch but will not work from my macbook pro.  Any thoughts on wht the problem may be?

    any idea on what the problem is?

    Welcome to the Apple Community.
    Does your MacBook meet the specifications for AirPlay
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.
    The following article(s) may help you.
    Troubleshooting AirPlay

Maybe you are looking for

  • Docks update problem

    Hi, There is a strange problem with some dock programs in my system. Such programs as dockbarx and docky do not update after their start to reflect actual state of windows. They only show those windows which were opened at their startup, and if I clo

  • Apps wont sync after reset

    had to restore ipod now my apps wont transfer back to ipod,all content shows in my itunes Ideas anyone?

  • Problem with lost of the access to the RMI server

    Hi to all. We have two applications. First one (master) provides to second (slave) through RMI service their data or other resources. In the ordinary way all works fine. But if we need for some reason restart master application, slave can't access to

  • Help me n3250

    i have some problems regarding nokia 3250 and they are as follows: 1. *111# it shows done 2. every time when i switch off and switch on the ( n3250 ) phone doesn't read the memory card i have to open the memory card slot and then close it.Then only i

  • Question on ASM operation

    Hi, i am using oracle 11gR1 and ASM as storage option. user sys is ASM admin but i am not able to access ASM instance with sys user. if i do su oracle then i can access asm instance , do asm dg operation etc. i thought ASM admin is the one who can do