I plugged a usb controller into my mac and the vibrate function is not stopping. Do macs not support plug and play?
I'm still very new to forums so please excuse anything that may have been previously asked. I purchased a USB controller for my mac to play a couple games and the vibrate function on the controller will not stop. I was wondering if there is a way to access the controller setting or if os x supports plug and play controllers? Any help is greatly apprectiated.
Hello Knowledgelink
Go through the steps in the article below to restart your iPhone into recovery mode to then restore your iPhone to the latest version of iOS.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.
Similar Messages
-
I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????
Connect your iPhone to iTunes and restore or follow the prompts.
-
I wanna get a new airport express or time capsule, I'm leanin towards the time capsule but in wanna know If I plug my USB printer into it if it becomes an AirPlay printer so I can print from my iPad
Nope. It's got to be a real AirPrint printer.
However, you may be able to use an app and print the way you described. Check out printopia. -
Plugging a USB key INTO an N Series
Okay, this might be a stupid question, but why can't we plug a USB key INTO an N series phone. It has a USB port (okay, maybe the wrong size, but a cable/converter will sort that out).
I know there is a power issue to provide enough power to read the key, but is it that much? Is there anything that allows you to plug a key into an S60 phone and use it as a mounted drive? What better way of travelling with an extra stash of music and films.
Any comments or advice is welcome.
MarkHello
I don't think we need the SDCARDS also now.
Simply, install winamp (latest), install winamp remote, assign the music and movies folder separately.
Log in to your phone, browser, to winamp orb or www.orb.com (type your winamp remote username and pass. that's it.
You see a complete list of all your music and movies on your home computer, or where your winamp remote is active. Ask your friends to join in on their own ID;s and make them as friends, your list will grow huge.
I have used this, I have played 1080p HD movies on my N82, with super sharpness. Simply use the provided Video out cable anywhere, and play it on a bigger screen, or on your mobile screen.
Same for music, you have whole lot of music folders in your home computer now on your mobile.
do we need cards ???
for movies you need 3G or live connection/edge or WiFi, point anywhere you are.
Thank you
Message Edited by n82phone on 15-Jan-2008 09:39 PM -
When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?
Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?
Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version thjat runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info. Any solution?
Thank for for your suggestions. Unfortunately they are of little help. I am running on Snow Leopard and the PalmDesktop works fine. However, I do not want to quit my PalmTungsten unit as it is my backup for all my important access information. If it cannot run on Mavericks and no other solution is at hand, I simply will not update my OS X, but work on my Snow Leopard as it is.
I do not know how on earth I can migrate the information from my Palm into another system, and then quit the PalmPilot. If you have any intelligent solutions to this I would appreciate an input. A manual copy and paste solution is not acceptable. I may however run it on Windows via Parallel Desktop, but it is a lousy solution, and demonstrates (again) the weakness of Apple's OS and lack of compatibility. I am not impressed by the OS X performance.
Thank your for your attention. -
How much real world performance difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much. The CPU speed of either one would be between 2.8GHz and 3.0GHz.
What are the differences.... firmware and build, there were tweaks to the PCIe bus itself. As a result 3rd party cards and booting is better.
Support in 5,1 firmware for more 56xx and W35/36xx processors. Also memory timing.
The 4,1 was "64-bit boot mode optional" and 5,1 was default. I don't know if there are changes but I assume so, even if it is not reflected elsewhere or in version number.
I don't know what the prices are but 2009, to buy one today, when the 2010 is $1800.
The 2008 of course was test bed for 64-bit UEFI and it sure seems even Lion and then ML are not as well engineered - outside of Linc who would be the least likely to have a problem.
I would assume 2010 has better support for 8GB and even 16GB DIMMs as well as for 1333MHz.
Nehalem family had only come out in fall 2008 and a lot of work went into making improvements well past 2009.
If you remember, there were serious heat problems with those and 10.5.7+ up thru 10.6.2 even with iTunes, audio, and hyperthreading and cores hitting and staying in 80*C range. That I assume was both poor code (sleep does not mean poke and ask constantly) as well as changes in SMC and kernel improvements, to work around. Microcode can be patched in firmware, kernel, by drivers and by code, but it is best when the chips and core elements don't need to be.
If someone is stretched, and can get 2009 for $1200 it might be a fine fit. That year offered the OEM GT120 which isn't really as nice and matched for today both OS and apps that rely on a GPU. And for odd reasons two such 120's don't work well in Lion+ but that is probably minor. Having the 5770 is just "nicer" though.
There are some articles about trouble booting with PCIe SATA/SAS/SSD and less trouble with 2010. Also support for graphic card and audio I think was one of those "minor" 5770 related support issues. But shows some small changes were made there too.
I wish someone would come out and pre-announce DDR4 + SATA3 along with PCIe 3.x (for bandwidth and more power per rail) along with say Ivy Bridge-E socket processors was going to be this summer's 3 yr anniversary and to replace the 2010 designed motherboard. But that is what is on Intel's and others drawing boards simmeringn in the pot. -
My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?
Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod. -
I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?
Yes you can copy the content to your new machine and use Home Sharing to keep the content identical
Connect the two machines via an ethernet cable it is 3 times faster than Wifi. Turn wifi off on one machine to enforce ethernet connection
In System Preferences, Sharing turn on File Sharing
Then
Copy the music/itunes folder from the Macbook pro to the music/ folder on the imac
Both machines should now have the same library
Disconnect H the ethernet cable
Set up Home Sharing and under Settings at the bottom of the Home Sharing page. Select to transfer new purchases.
Do the same on the other machine.
Then when you r machines are connected by wifi and each time you start itunes it will transfer your new purchases
Setting up home sharing -
well I stupidly upgraded my Iphone 3s to 6.0.1 and now it isn't compatable with Itunes but I run a PowerPC and the itunes is only for an Intel Mac so.........now what? It's more important for me to have my Iphone communicating with my older Itunes so what older software do I need for my phone since I'm not buying an Intel Mac.My Protools would not like it.
ZootiamClick here and install the software.
(72975) -
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
if i bring mac in for service and the service is expred what do they charge me to look and give me an estimate
There is no charge for diagnosis.
-
Please my iphone is on the activation page and i can't do nothing, there is a sim card into but itune don't recognise it, and the phone don't want to activate. I tried everything, and before the reboot the iphone 3 was worked verry well. Please help me !
Hello there, rebeccallouche.
The following Knowledge Base article offers up some great steps and links to some additional information that is pertinent when having activation issues with your iPhone:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Additionally, if the iPhone is not being recognized in iTunes this article will be useful as well:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?
It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.
Maybe you are looking for
-
Page items do not go into Excel when exporting
We are using 10.1.2 viewer and plus (and I have the desktop version available). I have tried exporting a worksheet with page items using all 3 of the above and the page items will not go into excel. Is there any trick to get this to work? I thought t
-
0I_FYPER - Variable in BEx gives no result
Hello all, I have a problem in BEx-reporting after a releasechange from BW3.5 to BI7.0 and at the same time SEM-BCS4.0 to SEM-BCS6.0 which belongs to the variable 0I_FYPER. I use this variable in the columns (only) in order to give the user the possi
-
Urgent --- How to resend an outbound IDoc which is in status 03
Hi Experts, I've a rquirement to resend an outbound IDoc which is in status 03. I don't want to use BD87 or WE19 to reprocess. Please provide me some FM or some technique by which I may use in a Z-program to accomplish the above requirement. Even if
-
Mounting directory to a file system
hello, i am trying to figure out how to use filesystemlistener to mount a new directory to the filesystem. if someone point me in the right direction that would be great. Thanks regards
-
Bank sign-in page appears to have been hijacked, how to proceed?
My bank sign-in page seems to have been hijacked on Firefox. Says my online ID is incorrect and asks for social sec. number. Contacted bank and confirmed online ID. Am able to log-in through Explorer, but prefer Firefox. I've been told to uninstall a