I Pod 60gb classic synching problems

I have an i pod 60gb and some how I lost all my music and videos everything this has happened before but I was able to sync and it went back on with no problems. Yesterday however I synced and it synced but no music went on. Know all of a sudden it says that it can't sync because there is no more memory but I know know that is crazy because I only have like 200 songs and I know for a fact this i pod can hold more then that. I have done just about everything I can except for restore it. I don't want to do that because I don't want to lose my songs. PLEASE HELP!!!!!

If your iPod doesn't have engraving and you bought it from an Apple Store, you have 14 days to return it, but you can only get an exchange, and not a refund.
Otherwise, sell it on eBay or Craigslist and buy a 5th gen. The video out doesn't work like it used to because the video signal is no longer sent through the headphone jack.

Similar Messages

  • Why won't my ipod classic synch with itunes in Windows 7?

    why won't my ipod classic synch with itunes in Windows 7?

    I have the same problem with windows 7 and msy ipod classic will not sync...have no access to  thousands of songs and playlists..Help!!

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • Hi I have an ipod classic.The problem I have is that the ipod seems to sync new music ok but I have a number of podcasts downloaded and they do not sync to the ipod.Any suggestions please ?

    Hi I Have an Ipod classic.My problem is that the Ipod seems to sync music ok but I have a number of podcasts downloaded to itunes but these don't sync to the ipod,(they have in the past,but no longer). Has anyone any suggestions please ?

    hi gary
    have you tried to sync your ipod ,when you click on the side where it shows your ipod?
    Click on where it shows your ipod name for example garys ipod,when it opens up the summary page click the sync box,bottom right,and see if that helps.
    In the summary page click on podcasts,click the box on sync podcast box (top),read before when the box opens and says are you sure you want sync podcasts.,theres a box underneath,which says automatically include ,make sure thats ticked.
    hope this may help madforit

  • 6230i Synch problems

    Nokia 6230i
    Windows XP (Service packs 1 & 2)
    PC suite 6.0 (from CD) attempted download of 6.81 from website.
    I've been having some synch problems. Occasionally I found that after a synch all my contacts would appear twice in Outlook. Happened again last night. I deleted all the repetitions in Outlook & deleted all the contacts on the phone thinking to start afresh. Disaster. When I synchronised again, all that appeared on the phone was a random selection of contacts - about 20 - rather than all the 400 in Outlook.
    So... I deleted PC suite & decided to reinstall from the CD. I got this error message. "The synchroniser is unable to load the interface() required to support sychnonising with Outlook 2." Deleted again & tried downloading 6.81 from the website. Got this error message. "Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt & cannot be used." When I tried ignoring that I got "Internet error 2350" & could proceed no further.
    The data1.cab file seems to be something to do with Adobe Acrobat reader so I tried re-installing that - but same error messages. I also get the same error message if I try to download the latest version as an upgrade to the old version.
    Can anyone out there help?
    Chris

    I listed just folders (and one of the folders is "username" and that is of course if you have a username, if not, then skip that level).
    just open windows explorer and scroll step by step to
    My computer -
    C:Local Disk)-
    \Documents and Settings
    (\username\)
    Application Data
    \Nokia
    \PCSync
    \SynchData
    \your phone IMEI nr
    And under that you should find files with extension
    .SML
    .lml
    delete those. Then try syncing againMessage Edited by manta on 07-Sep-2006
    05:12 PM

  • A tip for synching problems

    Last Thursday night I put my iPhone in the dock before I went to bed and saw that it started backing-up and synching. When I got up in the morning it was still synching contacts. I watched it for a while and it never completed. I undocked the phone, put it back in and same thing, it would never complete synching contacts. I searched here and saw that some folks were have the same or similar problems. On Sunday I noticed that the synch with MobileMe was spinning and it too never completed. I could not cancel the synch from the pull down menu so I force quitted it from the Activity Viewer. I then restarted the Mac and lo the problem did not reoccur.
    So if you are having a synch problem take a look at your MobileMe synch to see if that may be conflicting with the iTunes-iPhone synch.
    Have a good evening

    Hi John,
    I am working on development an enterprise application using EJB 3.0 on Weblogic 10.
    While developing, I am keeping all my classes (from ejb's as well as web) into APP-INF/classes directory. It is working fine for Web and ejb 2.0 packages, but ejb 3.0 packages, I get the following error when I keep my ejb 3.0 beans classes in APP-INF/classes directory.
    No EJBs found in the ejb-jar file 'customer'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    One solution is to keep the classes under customer ejb directory, but I wan tto keep all the classes in APP-INF/classes directory so that when using Eclipse IDE I can output all compiled sources into APP-INF/classes directory.
    Has anyone faced this situation? Any suggestions to fix this issue?

  • AUDIO SYNCH PROBLEMS

    I have never had an audio synch problem 'til now. I am running 10.5.7 on a 2.8 GHz Intel Core 2 Duo 4 GB ram, 24" imac.
    iMovie 6.0.4
    I have a 50 minute heavily edited project with many transitions, etc.. I have no problem with the footage downloaded from my Sony HD camcorder. I even saved many individual frames as pictures and changed them to the beat of the music in the timeline and all worked perfectly. BUT, my problem is with the "video trailers" I slipped into the timeline. The audio slips when I play back in the timeline AND when burned to DVD. BUT, it does not slip in the same place every time I preview it. If I scrub the playhead back over some of the bad scenes and play them again, they are in synch. IT KEEPS CHANGING..... When I export to a desktop movie to review - the synch problem is there and some of the audio is missing. This only happens on "movie trailers" I have downloaded.
    I can't figure out why it keeps changing in the timeline and then correcting itself when I back up and play it over again. I AM GOING CRAZY........
    Thanks in advance for any suggestions.
    Wally

    Thanks for the reply but my problem is not with iDVD - it is with iMovie - when I add "trailers" to it they go in and out of synch at different places everytime I review it before moving on. When I scrub back over the problem area and then play again, they are perfect for one time and then I try again and they are not synched. The problem is in iMovie.
    Thanks,
    Wally

  • Audio synch problem

    I have a 1 1/2 hr program in HDV that I'm having audio synch problems with during export. All my frame rates for my clips are the same as well as my audio sampling rates. It will start fine, then be slightly off and by the end of the program that audio is behind by about 3 seconds. I've tried all formats, reference file, self-contained, Anamorphic DV and still no luck. Any ideas?

    Exporting Quicktime movie...current settings, video and audio....just uncompressed right out of FCP.

  • Audio synch problem from 24 to 29.97

    I am working for a tv show that is having a major audio synch problem.
    We send our mix to an external sound house for our pro-tools mix. They request the file to be 29.97, though our timeline is 24. In turn, we export a 24 time line, re-import to an 29.97 timeline and than re-export at 29.97 with a time code burn. They export the mix, using a sound compressor that converts the mix to a 24 fps synch, we send them a 24 frame export that they can check it againest on their end in Final Cut Pro. For them, both the opening and end two-pop lines up. When we recieve the mix back however, and bring it onto our timeline, it is always 24 frames ahead of the picture. We can't fiugre out why.
    I know this all sound very confusing.
    Below is our export and timeline settings:
    OUR TIME-LINE\EXPORT SETTINGS:
    1st Time Line:
    FS: 1280x1080
    FPS: 24
    Compressor: DVCPRO HD 1080i60
    Aud Rate: 48.0 KHz
    Aud Format: 32-bit Floating Point
    1st Export:
    FPS: 24
    DV\DVCPRO - NTSC
    Compressor: DVCPRO HD 1080i60
    Aud Rate: 48.0 KHz
    Aud Format: 32-bit Floating Point
    Data Rate: 2.9MB/sec
    2nd Time Line:
    FPS: 29.97
    Compressor: DV/DVCPRO - NTSC
    Aud Rate: 48.0 KHz
    Aud Format: 32-bit Floating Point
    2nd Export:
    FPS: 29.97
    Compressor: DV\DVCPRO - NTSC
    Aud Rate: 48.0 KHz
    Aud Format: 16-bit Integer
    Data Rate: 3.6 MB/sec
    AUDIO MIX SETTINGS:
    Data Rate: 140.6 K/sec
    Aud Rate: 48.0 KHz
    Aud Format: 24-bit Integer
    Total Out: The audio is exactly 24 frames ahead of the video by the end of the clip
    We shot on a Panasonic HDX900
    Can anybody think why this might be happening?

    ProTools mixes 24fps...and 23.98, which SHOULD be the case here. There is NO REASON why they should want a 29.97 mix, nor should they mix at that rate...because you are not working at that rate nor delivering that rate...are you?
    Your sequence settings confuse me. DVCPRO HD 1080i60 runs at 59.94. You can get it to 23.98 with a little work...but you indicate 24fps. Is that SOLID 24fps? Not 23.98? If so...that is a major issue. You should not be working at 24fps. 23.98 is the frame rate...
    Still...if you are working at 23.98 and delivering a 23.98 master, the audio guy needs to mix at 23.98. ProTools is capable of 23.98. If they can't do that, then I'd suggest finding another mixer.
    Shane

  • New iPod, Don't want synching problems

    Wanted to ask this question before problems arise....
    I'm waiting on delivery of my new 80GB 5th generation iPod to replace the old one (60 GB iPod) that died.
    I have heard about synching problems that happen when more than one iPod are connected to a single account. What precautions can I take to get all the music and audio books from one iPod to another?
    Thanks in advance,
    Sue in Sunny California

    *I have heard about synching problems that happen when more than one iPod are connected to a single account.*
    Not sure where you heard this but many people use multiple iPod with a single computer. As you can see from this guide, it's well supported: How to use multiple iPods with one computer
    *What precautions can I take to get all the music and audio books from one iPod to another?*
    You just need to connect your new iPod. If the songs etc. you had on your previous iPod are still in iTunes they will load onto your new one. Follow the onscreen instructions to register and name your iPod, when that is done you'll be asked if you want it to update automatically from iTunes, choose yes if you do. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like

  • Classic environment problem in Tiger

    I recently installed OS 10.4 and updated to 10.4.8. I had been using 10.2.8 and I was having no trouble with OS 9 or the classic environment. Today I tried to start up OS 9 and here are the messages.
    1. install Quick Time 6.0.3 or later
    2. Classic needs to update files in System Folder
    3. There is a problem with updating the Classic specific files
    4. Classic was unable to update it's files in System folder.
    Do you have advice on how to update System Folder in OS 9 so I can open the system?
    17-inch flat panel iMac G4   Mac OS X (10.4.8)  

    Hi, Gail.
    You might want to be sure you are running Mac OS 9.2.2 for Classic. A number of interesting Classic-related problems have been noted unless one is using that specific version of Mac OS 9 for Classic under Tiger. Essentially, Tiger requires Mac OS 9.2.2 for Classic.
    If you're not using 9.2.2 for Classic you can find the relevant Mac OS 9 updates here.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • HT1386 has anyone ever had synch problems due to "PAIRING RECORD IS MISSING

    Has anyone ever had synch problems due to "Pairing record missing"?   Just downloaded new IOS on my computer and this is what message came up

    Try rebooting your computer.

  • SYNCHING PROBLEMS WITH I POD CLASSIC

    SINCE UPGRADING TO MAVERICKS MY I POD CLASSIC WILL NOT SYNCH WHEN I CONNECT TO I TUNES...ALSO WHEN MY I POD IS CONNECTED AND I'M PLAYING MUSIC FROM IT, IT WILL CRASH ONCE IN A WHILE...MY I PHOTO ALSO CRASHES ONCE IN A WHILE....NEVER HAD THESE PROBLEMS WITH MOUNTAIN LION.. ANY ANSWERS OUT THERE?????

    Not sure what you just wrote.
    You can use your iPod on any computer.
    When you connect it to iTunes for the 1st time on a computer, it will ask if you want to link the iPod to this library. If you say yes, it will simply Automatically update everything when connected to this computer.
    You don't need to delete anything from another computer.

  • Brand new Ipod Classic 80Gb - Synching Problems - Ipod ejecting itself

    Bought a new 80Gb Ipod last week after my old one crapped out. Computer also crapped out so had to load all my CD's to another laptop on newly downloaded Itunes 7.5. Hooked the new ipod up to the laptop and immediately had problems with the Ipod 'ejecting' itself before any songs were loaded. Furthest I managed to get was name the darn thing before it ejected. So, tried the 5R's with no success - still kept on 'ejecting' - sometimes straight away, sometimes part of the way through synching the library always with the end result of no songs on the ipod. Tried updating windows, updating Itunes, restarting computer, using different cables, different USB ports (all 2.0) with no success. Took the Ipod to the Apple Genius Bar where they restored it and managed to successfully synch a few tracks. Thinking the problem was solved - took it home and it is doing exactly the same thing again. AAAARRRRGGGHHH. Trawled the forum boards all day yesterday found a few suggestions I hadn't tried - setting it to enable disk use etc etc. When I hooked the ipod up last night it was ejecting immediately after connecting so not even giving me a chance to try the new fixes. Plugged it in this morning for a last ditch attempt and it connected long enough for me to switch on the manual synching and I successfully loaded 32 songs out of 4000 (yippee!!) before it started the same carry on again - disconnecting itself..
    This is so frustrating - what has happened to the ipod??? I had no trouble at all with my old one. A new piece of kit such as this should not be so time consuming and stressful. After this experience there is no way I will buy another ipod.
    Has anyone got any suggestions?

    I had over two weeks of frustration getting the right collection of fixes installed (iTunes 7.5 and 1.0.2 on the iPod; 1.0.3 should be OK). My symptom was that iTunes starts to go spacey on me when I plug the iPod classic into the USb port. There are long delays that I can't find a good cause for.
    Start up iTunes on your PC.
    Before you connect the iPod to your PC, try putting the iPod into Disk Mode (don't know the article info but there is one on this site; just search for "Disk Mode". There will be a check mark on the iPod screen when you have successfully arrived there.) Then plug it into the USB port on your PC.
    It may take several seconds/minutes for the iPod to be recognized in iTunes (I get some help with this by clicking on the Windows Start button, which overlays part of the iTunes screen, and waiting for iTunes to refresh its screen.)
    Before you click the Sync button, be sure you have chosen all the tabs you want to sync; since my music library is over 40GB, I choose this one first and let iTunes copy over my whole music library. I also check the Enable Disk Use box on the Summary screen. I then go out for coffee or to the bathroom (it takes a while).
    Once everything is copied over, be sure to press the Eject button in iTunes to be sure it is releasing the iPod.(Try my Windows Start button trick above to get positive feedback when it is safe to disconnect.) When it disappears from the list on the left-hand side and the screen is refreshed, it is safe to disconnect the iPod. (I'm not sure this is absolutely necessary, but it works for me.)
    It can be a little dicey to get the iPod out of Disk Mode or even to just turn off the iPod, but keep trying and you should be able to get it back into normal mode with all your music, video, podcasts and photos (haven't tried Contacts or Games) playable.
    Getting
    When all the information has been copied over,

  • Annoying Ipod Synching Problem!!!- Laptop Crash- Now On Another Comp

    I Have a Very Annoying and frustrating Problem with my Ipod Classic (80GB). Recently my laptop Crashed and i got all the music onto my main computer now. The Problem now is getting the music onto my ipod. I Synched it to the computer, Therefore It erases my music from the ipod and synchs it to new itunes. But everytime i try to get the music onto the ipod it either, connects them disconnects, Has a Unkown error Or when i've Waited for ages getting all the music on to it, It says A required file is missing and so your ipod cannot be Syched AND i end up with nothing on the ipod and lots of wasted time
    Someone Plz Help.
    I reset my ipod and tried it in CD mode but it still didn't work!
    What Should I Do?
    Message was edited by: TigerMegz

    +I tried various troubleshooting steps and each time when plugging the iPod in Itunes it starts up and it takes maybe 1 minute trying to recognize it when the computer crashes and reboots automatically going to the black screen and doing a file dump.+
    I'm curious about this point. Is there any flash of a blue screen at any point here? (That's a more familiar sort of thing to be seeing prior to the system doing a restart after a serious error.)

Maybe you are looking for