I-Pod Classic Won't Play I-Tunes Movie

I recently purchased Scott Pilgrim vs The World off of I-Tunes and was able to transfer it to my I-Pod however whenever I try to play it I just get a blank black screen that says "Chapter 1" with the counter set at 0:00. It plays my other videos just fine including an entire TV season I purchased off of I-Tunes.
Also worth noting that this was a purchase not a rental.

Well let me bump this, as this problem is becoming annoying. Again the I-pod nano I own, will not let me do anything, I.E Changing playlists, & the wheel will not work at all if it is warm, or not ice cold.
Solutions needed thanks....Vegeta

Similar Messages

  • ITunes won't play imported tunes w/o original CD in CD-Reader

    I'm using Windows XP and ITunes 6 on an HP-Pavilion laptop. I imported some tunes into ITunes from the original music CD, but when I remove the CD ITunes won't play the tunes until I put the CD back in the reader. Older tunes loaded several months ago play OK without the CD in the reader. What's wrong?

    Solved my problem. I had plugged in my new ION USB turntable to an USB port but not to a stereo amplifier thinking that the sound would play through my IMAC speakers. According to the ION user manual sound will come through my computer speakers when I recording a track from a record. What the manual did not say was that plugging into the USB port disabled the speakers from ITunes. When I unplugged the ION cable from the USB port I got my ITunes sound back.

  • My Ipad 1 won't play Cars2 HD movie how do I fix?

    my Ipad 1 won't play Cars2 HD movie how do I fix?

    Hi
    To get my Audio working I do
    • only use .aiff 44.1kHz or 48kHz
    • .mp3, .wma etc - all I convert to .aiff first
    • from iTune - I do - Collect needed audio into a new PlayList - Then I burn this as an Audio-CD (not .mp3 - only .aiff) - then I use the files from this Audio-CD in my movie projects
    And by doing like this - I have very few Audio problems.
    Yours Bengt W

  • I POD classic won't turn on, won't sync, screen is black. Need help getting it to work again.

    Need help getting I Pod Classic to turn on and run, I Tunes shows error 1601.

    Troubleshooting: My computer won't turn on
    BTW, this is the Mac Pro desktop forum

  • I Pod classic not appearing in i tunes

    When I plug in my I pod Classic 80g the follwing error message occurs:
    There might be a problem with some of the files on this device or disk. This can happen if you remove the device or disk before all the files have been written to it.
    Scan & Fix (recommended)
    Continue without scanning.
    I have tried clicking both options, but although a scan appears to start, the dialogue box disappears and nothing happens. I have tried the "5 Rs" but am unable to restore as the device is not shown in I Tunes.
    I also have an i phone which I have no issues connecting to the same laptop & itunes, so would appear to be an issue with the i pod?
    Any ideas would be appreciated as I am at a loss with this...
    Thanks abs

    I have the ipod classic 120gig and am having the same problem. Just started today. I even tried Media Monkey and can't get it to recognize my ipod. Still searching the discussion groups for a fix.

  • 5th Gen iPod Classic won't play video

    I've been having a problem getting my 5th gen. iPod to play video podcasts. I'm using iTunes 9.2.1 and os 10.6.4. For about a month or so now my iPod will play a couple videos and then it just stops playing them. It usually finishes playing but then goes to black screen before the next video starts. If I click the pause button the battery indicator shows up at the top and three podcast titles quickly display and then disappear, and then the screen returns to the menu. From that point it won't play any video podcasts; until I resync the iPod then it will play three of four video and quit again until it's resync'd. Even after it stops playing videos it will still play audio podcasts without interruption.
    I've tried restoring my iPod, but I get the same behavior after the restore.

    I have an 80 classic and i started getting new movies and tv shows and my ipod stoped playing movie files. The time i experienced this was May 22, 2009. I loaded the free episode of the Glee Club offered by itunes. Did you ever find out how to fix that. Someone PLEASE HELP!!!!!!!!!

  • IPod Classic won't play movie

    I download Les Misérables from iTunes with a redemption code I got within my DVD.
    It plays perfectly fine on iTunes.
    However once I synced it to my 80GB 6th gen iPod Classic, it does not play.
    It simply goes back to the previous screen (choose a movie).
    Any ideas on how to fix this? - as far as I'm aware, this is the only video that does not work, all others do but they are home videos.

    I have an 80 classic and i started getting new movies and tv shows and my ipod stoped playing movie files. The time i experienced this was May 22, 2009. I loaded the free episode of the Glee Club offered by itunes. Did you ever find out how to fix that. Someone PLEASE HELP!!!!!!!!!

  • My ipad won't play the rented movie I started this morning on plane

    I started watching a rental movieon my ipad this morning on a plane.  It's been less than 24 hours, but the rental won't play.  It opens up and then says "cannot open".  How do I fix this?  If it's an account thing, my room at the hotel will charge me for a 2nd device, so I need to take it elsewhere to get a wifi signal.  This is an ipad 2 and I've never had this happen before.  It is within the 24 hours after I started watching it and I really do want to finish the film before it expires tomorrow.
    I've tried restarting the app.  I've done a hard reset twice.  What should I try now?  (The movie was downloaded directly onto the ipad; it was not transfered via itunes.)

    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • QT Pro won't play avi or mov movie

    I've download the latest QT Pro but it still won't play the video portion of an AVI or MOV video. What else do I need. I find it incredible that you have to go to this much work to play a video on a MAC.

    I just updated QTpro and I can't get audio to play on avi or mov. It's started out and then kept disappearing and now nothing. Major drag.

  • I rented a movie on Apple TV and it started to load then froze, now I get one of two errors "error loading content" or "movie will be ready to watch in 1 minute"... after trying repeatedly ,it still won't play. The movie rental is going to expire.

    i've tried this repeatedly for the past 6 hours. Rebooted, etc. I can stream movies from netflix and hulu but the movie i rented won't play. The timer is ticking becuase it started then froze but now it won't load.

    force quit app.  double click home button and slide app up and off page
    Peace, Clyde

  • 1st Gen Apple TV won't play iTunes purchased movie

    I purchased a movie (not HD) on iTunes and cannot play it on my 1st gen Apple TV.  My older movies are still there to be viewed.  Any thoughts?

    Does it appear in the movie list on the AppleTV1 but won't play?  Does it give an error?
    Try purchasing something on AppleTV1 direct - check in iTunes you may find a free episode of a TV Show or similar.  I had an issue last year with new content until I purchased something else on AppleTV - i assumed it was some kind of authorisation getting updated.
    AC

  • 1stGen Apple TV Won't Play Newly Purchased Movies

    I have a 1stGen Apple TV and just purchased 2 movies on my computer via the iTunes Store. When I try to play them on my 1stGen Apple TV It shows the movies on my "Shared Movies" Menue, but won't play the content. On the main menue it shows them at being 0sec long. I can navigate through the movie content menues, but can not play any of the content. All other movies work just fine, just these newly purchased ones....I have tried everything and nothing works.

    You might try copying the HD movies to your desktop, then deleting the listing and original from iTunes, iTunes should then let you re-download an SD version for the Apple TV 1. You can then re-import the HD version from your desktop.

  • Apple TV won't play my downloaded movie

    I just got an Apple TV 3 a couple weeks ago, have already successfully downloaded one movie and watched it with no problems.  I downloaded another (Hunger Games) movie this week and when I turned my Apple TV on to watch it, it said "Hunger Games is now ready to watch, click to play" however when I click to play it says it will be ready to play in 28 hours or so.  The movie is completely downloaded so I am not sure why it won't play.  I have tried resetting my Apple TV and unplugging it and the router.  Puchased all movies through iTunes.  Please let me know if you have any suggestions! Thank you!

    Use Google’s Public DNS Server To Fix Apple TV Streaming Problems
    1. Navigate to Settings >> General >> Network and select Configure TCP/IP.
    2. Select “Manually” next to Configure IP.
    3. Dont change the IP address or the Subnet Mask and Router Address. Just click "Done".
    4. Set the DNS Address screen with the following: 008.008.008.008 and click “Done.”
    You should now be able to stream more smoothly on your Apple TV.
    If this works for you, please buy a cup of coffee for a complete stranger or some other selfless, random act of kindness.

  • When I move audio from itunes it won't play in the movie. How do I fix that ?

    When I move a song from iTunes into a movie, it won't play when I play the movie.  The movie file might be too big. 
    How do I fix that?

    Hi
    To get my Audio working I do
    • only use .aiff 44.1kHz or 48kHz
    • .mp3, .wma etc - all I convert to .aiff first
    • from iTune - I do - Collect needed audio into a new PlayList - Then I burn this as an Audio-CD (not .mp3 - only .aiff) - then I use the files from this Audio-CD in my movie projects
    And by doing like this - I have very few Audio problems.
    Yours Bengt W

  • ITunes 11 won't play downloaded rented movie from iTunes Store

    Last night I rented a HD movie from the iTunes Store. I downloaded it to iTunes 11 on my 17" MacBook Pro running OS X 10.8.2 and Quicktime 10.2.
    First off the movie has a blank icon but when I click on it it does show the details of the movie. However, when I try to play it all I get is this message — "This movie requires QuickTime, which is not supported by this version of iTunes."
    As far as I know everything on my computer is up to date so why is this message appearing? For the **** of it I tried the 32 bit trick but iTunes wont start under that!
    I then tried playing movie on my Apple TV2 — I can see the movie in the Rentals section but here it is asking for me to Authorise my computer! When I do this on my computer I am told it is already authorised which I knew anyway!
    This is most annoying!

    I am having an identical issue but it is for a Movie I actually purchased from the iTunes Store (Casino Royale).  I get the exact same error message in iTunes when I try and play it This movie requires QuickTime, which is not supported by this version of iTunes." and the artwork for the movie will not show up, even if I try and manually add artwork to the Movie myself. 
    My software is all up to date and I have tried deleting the movie and re-downloading it from iTunes a number of times.  Still nothing.

Maybe you are looking for

  • ITunes Problem Ver 6.0.1.3

    Hi I have a Laptop running Windows XP. I installed iTunes on it about 10 days ago and it has been working fine. But from yesterday whenever I click on iTunes or try to open it a pop up appears saying: "iTunes has encountered a problem and needs to cl

  • How can i update rows  in a table based on a match from a select query

    Hello How can i update rows in a table based on a match from a select query fron two other tables with a update using sqlplus ? Thanks Glenn table1 attribute1 varchar2 (10) attribute2 varchar2 (10) processed varchar2 (10) table2 attribute1 varchar2 (

  • Why is all of my music greyed out on my iPhone 4?

    I haven't been able to sync my iphone with my iTunes music for several months now, which is getting increasingly frustrating, and as the holiday season approaches, I really need something to tune out all the holiday music >:-|. To avoid all the obvio

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Pane

  • Comparing Entry Date

    Hi Gurus, I have an ODS that stores the price of products based on validity dates. For Eg: Material                 ValidFromDate           ValidToDate           Price ABC                      01/01/2008                10/01/2008              200 ABC