I pod isnt found again when its taking out of port

Got i tunes version 6 i had to remove it and reinstall it after i uninstalled i pod installed it again. When i go to put in i pod into its usual usb drive i tunes wont find it it doesnt come up in the source list. The only way is to uninstall it and install software so its formatted by the i pod driver. Have to do this everytime for i pod to work surely theres another way. I can update songs fine when i pod is connected but when pc turned off it does the same thing it doesnt find it as i pod when i turn it on.

Yes...
Option "UseEDID" "False"
I was thinking of trying nouveau. But I also play Open Arena from time to time and it'd be a shame to mess around with dual booting for just one game...
[dspider@arch ~]$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1280 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0* 56.0
800x600 51.0
640x480 52.0
512x384 53.0
400x300 54.0
320x240 55.0
1280x720 56.0 57.0
Last edited by DSpider (2011-07-24 09:49:02)

Similar Messages

Has anyone ever dropped an iphone in water and its worked again when its dried out?

I dropped my iphone down the loo! Will it work again when it has dried out?

Mine took a swim in a pool. Did the rice thing as described by Wjosten above. Got the phone back up and running but lost some pixels on the screen.
Just know, there is a moisture sensor inside the phone. If you go to the Apple store and they run a diagnostic, the phone will report back that it's gotten wet, thus nullifying your warranty. Doesn't take much for that Sensor to be activated. A good, sweaty workout at the gym gets it's going... Oh, that's if you workout with your phone in your bra, but that's a story for another time. TMI?

WHY wont someone help i pod isnt found anymore

Had a i pod shuffle working as usb storage device for like 3 months now i ve tried everything to get it back working again to i pod for updating music. I eventually got it working last night someone on icq told me how to do it i got i pod updating music and had module in source listBut i have forgotten how to do it all now. I want i pod to work as i pod not usb s device. Under edit prefrences it says i pod not connected but its in. Ive tried uninstalling software and installing it again for i pod nothing it didnt work atall. Now i havent got i pod options screen on i tunes it wont let me update it or restore it what do i do then. Please someone help me guide me throught the process. I need to get i pod module in source list again so i can update my music thanks. I pod isnt corrupted it plays fine.

Hi,
Please check this article
http://docs.info.apple.com/article.html?artnum=93499
also check
http://docs.info.apple.com/article.html?artnum=61711
Make sure that you have the latest iPod updater and the latest iTunes.
And restore with the latest iPod updater
http://www.apple.com/support/downloads/ipodupdater20051012.html
http://www.apple.com/itunes/download/

HT1212 how do i reboot an i phone when its locked out i have tried both ways DFU and also the way listed on the apple site

how do reboot an i phone after its locked out i have tried both the apple list and a DFU and both do not let me delete and start over

iOS- Troubleshooting update and restore issues
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.

I pod isnt found by windows xp anymore

Went to put i pod as enable disk mode for date transfer. Now i want to update my i tunes music onto it. Problem now is computer thinks its usb storage device. So go to restore it like ive beent told to factory settings. Nothing it didnt work. EDit prefrences in i tunes under i pod tab it says this I POD NOT CONNECTED. Go to reinstall the driver for i pod add new hardware etc, nothing says its a usb storage device. Use updater for i pod nothing doesnt work atall. Go to where i found enable disk mode in options for i pod in i tunes logo isnt there anymore. All usb ports are working fine and tried other stuff innit to make that they all work. No problems with USB hubs then so uninstall i tunes install it again same problem. How to ge the i pod back to being an i pod. Need some major help someone said relocate the DRIVE. Ive no idea what they mean please someone help me im afraid this is it for the shuffle. Also i lost the little cover tab that fits onto the memory port on shuffle its the casing any ideas on where to get a new one thanks> : (

See:
iOS: Device not recognized in iTunes for Windows
I would start by:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Does it charge?
I suspect that enhanced mean USB 2 port.

I pod isnt found atall by windows xp

I recently had to fix my computer cause it over heated now its fixed. I went into my i tunes and set up i pod as enable disk mode for data transfer. No i want music so i try and update it and nothing it wont find it atall as an i pod only as a USB STORAGE DEVICE!. I Tried to install hardware using i pod driver disk but computer isnt finding it as an i pod only as storage device. I plugged it in all usb hubs they all working fine. I go to the options to untick the enable disk mode, the options logo isnt there in i tunes atall nothing. In EDIT then prefrences then i pod tab it says i pod is not connected. Orange and green lights are flashing on it and it wont let me update songs on to it. I tried uninstalling i tunes 4 times and using the i pod updater, nothing. I went to RESTORE it the same thing happens, and tried to update it again same thing happens. I despeartly want to get my i pod back and im afraid im wont be able to now. Some one had a similar problem on here suggested to relocate the DRIVE but i dont understand what that means! Please someone help me get my i pod back to being an i pod. Using i tunes version 6. Mr d roberts. Also i lost the tab that goes covers the i pods memory port any ideas on how to get a new one!

Hi,
Please check this article
http://docs.info.apple.com/article.html?artnum=93499
also check
http://docs.info.apple.com/article.html?artnum=61711
Make sure that you have the latest iPod updater and the latest iTunes.
And restore with the latest iPod updater
http://www.apple.com/support/downloads/ipodupdater20051012.html
http://www.apple.com/itunes/download/

My Iphone 5 clock alarm isnt going off when its "on sound", it acts as if its on vibrate and doesnt wake me up. Started with the IOS upgrade. Is there a bug?

My new Iphone 5 clock alarm isnt going off where I can hear it. Its started on my 4S when I upgraded to IOS6 and even on the Itouch too. I set the clock alarm, turn on sound (not silent), the alarm goes off, but no sounds comes out. I have to reset home to get it to recognize its off, but that doesnt always work, it did it on both my Itouch and Iphone5 I almost over slept this morning because never of them went off and woke me up. Acted as it the sound was down (which it wasnt) and it was on silent mode (which it wasnt) Is there a bug with this? I cant trust my phone now to wake me up. Any help? Thanks Tracey

Same problem here. Me and my girlfriend swapped iphone 5's (she has white, I have black) in may and I rely on the alarm every morning to wake me up for work. It hasn't let me down.
A few days ago I set 2 alarms very early in the morning to wake me up for an early morning flight. Neither alarm made a sound & I missed the flight!!
We then swapped our phones back & she has just had exactly the same thing happen & has missed an important meeting at work. Again, quite an early morning alarm. The odd thing is I have a black iphone 5, also latest OS, never had this happen to me...
Has anyone solved this problem. I can't make it repeat (reset the same alarm for a different time & it goes off fine).
Does I need to buy her a dedicated alarm clock!?!

My iPod Classic 160GB is not recognised on iTunes - it says that there is no iPod found? When its plugged in! Please help

iPod classic is not recognised on iTunes. My iPod screen is flickereing constantly - from upside down to the right way around. It wont even show up on my iTunes. I plug it in to my MacBook and it gives me the option to restore but then once Ive clicked it says that 'it cannot be restored as there is no iPod found' when it connected and it says so on my iPod screen. Please help! Thanks J

Tried resetting the ipod and its enabled to be used as hard disk on itunes.
I assume you mean the "Enable Disk Use" option is enabled from under the iPod's Summary tab?
B-rock

How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can i buy Lion again when its already on my Air?

Hi.
I have the new Air with Lion pre installed. This is my first mac and i didnt make an Lion backup install drive when i first got it and now i need to reinstall Lion.
Im not sure why but when i try to switch on FILE VAULT it says it cant do it and i have to fromat the HD and reinstall Lion.
I go to the app store to try to buy Lion but all it says is Installed so i cant get it.
Does anyone have any suggestions for me?
Thank you very much!
Kaato.

Use the restore partition:
http://www.apple.com/macosx/recovery/
Note, if you aren't backed up, you may lose your data. If data recovery is important, check this FAQ*:
http://www.macmaps.com/backup.html#RECOVER

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

I already purchase a game and kind a deleted it when i finished playing the whole game. Now my problem is i'm trying to download it again and its asking to pay for it again. What should i do?

I already purchase a game and kind a deleted it when i finished playing the whole game. Now my problem is i'm trying to download it again and its asking to pay for it again. What should i do?

I did that already i can download the game but it still asking me to pay for every level even thou i pay already for the whole thing.

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery

Since I updated my iPad to iOS 6.0, it makes a shutter sound ( like its taking pictures) every time I close the cover, or even when I put it down. Any idea on how to stop this? Thanks!

Since I updated my iPad 2,it makes a shutter sound ( like its taking a picture) every time I close its cover,or even when I just set it down. Any idea on how to fix this? Thank you!

Omg, it worked! Thank you so much --- it's been driving me nuts for weeks now! The sound can get really annoying, lol!

I pod isnt found again when its taking out of port

Similar Messages

Maybe you are looking for