I pod isnt found atall by windows xp

I recently had to fix my computer cause it over heated now its fixed. I went into my i tunes and set up i pod as enable disk mode for data transfer. No i want music so i try and update it and nothing it wont find it atall as an i pod only as a USB STORAGE DEVICE!. I Tried to install hardware using i pod driver disk but computer isnt finding it as an i pod only as storage device. I plugged it in all usb hubs they all working fine. I go to the options to untick the enable disk mode, the options logo isnt there in i tunes atall nothing. In EDIT then prefrences then i pod tab it says i pod is not connected. Orange and green lights are flashing on it and it wont let me update songs on to it. I tried uninstalling i tunes 4 times and using the i pod updater, nothing. I went to RESTORE it the same thing happens, and tried to update it again same thing happens. I despeartly want to get my i pod back and im afraid im wont be able to now. Some one had a similar problem on here suggested to relocate the DRIVE but i dont understand what that means! Please someone help me get my i pod back to being an i pod. Using i tunes version 6. Mr d roberts. Also i lost the tab that goes covers the i pods memory port any ideas on how to get a new one!

Hi,
Please check this article
http://docs.info.apple.com/article.html?artnum=93499
also check
http://docs.info.apple.com/article.html?artnum=61711
Make sure that you have the latest iPod updater and the latest iTunes.
And restore with the latest iPod updater
http://www.apple.com/support/downloads/ipodupdater20051012.html
http://www.apple.com/itunes/download/

Similar Messages

WHY wont someone help i pod isnt found anymore

Had a i pod shuffle working as usb storage device for like 3 months now i ve tried everything to get it back working again to i pod for updating music. I eventually got it working last night someone on icq told me how to do it i got i pod updating music and had module in source listBut i have forgotten how to do it all now. I want i pod to work as i pod not usb s device. Under edit prefrences it says i pod not connected but its in. Ive tried uninstalling software and installing it again for i pod nothing it didnt work atall. Now i havent got i pod options screen on i tunes it wont let me update it or restore it what do i do then. Please someone help me guide me throught the process. I need to get i pod module in source list again so i can update my music thanks. I pod isnt corrupted it plays fine.

Hi,
Please check this article
http://docs.info.apple.com/article.html?artnum=93499
also check
http://docs.info.apple.com/article.html?artnum=61711
Make sure that you have the latest iPod updater and the latest iTunes.
And restore with the latest iPod updater
http://www.apple.com/support/downloads/ipodupdater20051012.html
http://www.apple.com/itunes/download/

I pod isnt found by windows xp anymore

Went to put i pod as enable disk mode for date transfer. Now i want to update my i tunes music onto it. Problem now is computer thinks its usb storage device. So go to restore it like ive beent told to factory settings. Nothing it didnt work. EDit prefrences in i tunes under i pod tab it says this I POD NOT CONNECTED. Go to reinstall the driver for i pod add new hardware etc, nothing says its a usb storage device. Use updater for i pod nothing doesnt work atall. Go to where i found enable disk mode in options for i pod in i tunes logo isnt there anymore. All usb ports are working fine and tried other stuff innit to make that they all work. No problems with USB hubs then so uninstall i tunes install it again same problem. How to ge the i pod back to being an i pod. Need some major help someone said relocate the DRIVE. Ive no idea what they mean please someone help me im afraid this is it for the shuffle. Also i lost the little cover tab that fits onto the memory port on shuffle its the casing any ideas on where to get a new one thanks> : (

See:
iOS: Device not recognized in iTunes for Windows
I would start by:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Does it charge?
I suspect that enhanced mean USB 2 port.

I pod isnt found again when its taking out of port

Got i tunes version 6 i had to remove it and reinstall it after i uninstalled i pod installed it again. When i go to put in i pod into its usual usb drive i tunes wont find it it doesnt come up in the source list. The only way is to uninstall it and install software so its formatted by the i pod driver. Have to do this everytime for i pod to work surely theres another way. I can update songs fine when i pod is connected but when pc turned off it does the same thing it doesnt find it as i pod when i turn it on.

Yes...
Option "UseEDID" "False"
I was thinking of trying nouveau. But I also play Open Arena from time to time and it'd be a shame to mess around with dual booting for just one game...
[dspider@arch ~]$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1280 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0* 56.0
800x600 51.0
640x480 52.0
512x384 53.0
400x300 54.0
320x240 55.0
1280x720 56.0 57.0
Last edited by DSpider (2011-07-24 09:49:02)

I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?

Maybe I'm the ******* but each time lately it is something else, something new with CC, things are taken out put in another place, things are completely taken out, later added again by special downloads and you have to go and search for the right files to copy and paste files and so on and on and on.... I already lost several hours by each time researching the needed info, files,patches before I actually can do something!
Now I needed to make for school an assignment, a contact-sheet that we needed to export import Bridge-Photoshop to create a video-wall. In school we're on the CS6 where contactsheets and PDF, creating in Bridge no problem, now at home running on the CC i'm kinda fu...d, after some research i find following message,
for now I'm afraid you have to keep your Bridge CS6 on your computer and use it for generating contact sheets (on my Mac I have to close Bridge CC before I can use Bridge CS6).
- bad news: The Bridge CC online help says that in the current version the Adobe Output Module isn't available anymore and so it doesn't support generating contact sheets: "The functionality to create contact sheets, PDFs, and web galleries is available in Adobe Photoshop and Adobe Lightroom, which are included in your Creative Cloud subscription." Generating contact sheets from within Photoshop is a mess. It's not as comfortable like in Bridge CS5/6, results are not predictable and the time it takes is not acceptable. Using a still fast Mac Pro with 2 x 3 GB quad cores took more than one and a half hour to create contact sheets out of o folder with 140 files – Bridge did that in minutes. Let's hope for Adobe developers working on Bridge CC to make things easy!
After doin some further research i find this:
Install the Adobe Output Module
When Bridge CC shipped, it didn't include the Adobe Output Module, which allows you to create PDF presentations and web galleries. Adobe Output Module is now available for Bridge CC.
Make sure that you have the most recent version of Bridge CC installed. To check for updates, choose Help > Updates in Bridge. Follow the instructions to install any updates.
Download the appropriate file below by right-clicking (Windows) or Ctrl+clicking (Mac OS) and choosing to save the file. Save the file in a location you can remember, such as your Desktop.
So far no problem, following the instructions hoping my problem was solved,
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
What do you think? Of course everything to be found in my file paths except of course the file i needed, THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?
Added to make things clear a print screen of C:drive path....
So any idea how to resolve this problem would be very much appreciated. Cheers

Hi Ronald,
Sorry for the kinda late reply, busy days these days, lol but indeed somewhere i went wrong in the path. Went in search for the one you gave, progs-COMMON-Adobe and indeed correct. Thanks for the reply as the helping hand, cheers.

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Anyone Using Navigon GPS found a Good Window Mount?

I think I've decided on Navigon rather than TomTom, but I have not as yet found a window mount, other than TomTom's, that has a built in GPS booster, can charge the iPhone, and route voice prompts through your stereo speakers.
Anyone using Navigon...Have you found a good window mount with the features as noted above? Apple Canada does not stock the TomTom mount. :o(
Thank you for your help.

You can get the TomTom car kit from the TomTom store when it's available: http://www.tomtom.com/products/product.php?ID=1019&Lid=4&Category=2
You can also use the Magellan Premium car kit when it's available: http://www.magellangps.com/iphone/iphoneappcarkit.asp

HT1222 i found itunes for windows 8 64 bit but after downloading it iwas told it cant work in my system. what can i do to make it work?

i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

MY PRINTER " HP Deskjet Ink Advantage K209a" OPERATING SYSTEM Windows 8 32 bit
Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
[Personal Information Removed]
Please give me a suggestion

Hey 101214,
I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a). I also see that you need a driver link for this OS and Printer. Please follow the link below to download the driver for this printer/OS combo.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
If you need information on how to perform the USB installation on your Windows 8 PC please click here.
I wish you the best!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
tt2

I Pod not Found

I have bought my sisters I Pod Classic,she removed music etc from it,I connected to my PC I Tunes opened and told me to Restore the I Pod which i did.It updated the software has well.but when i connect the i pod i tunes opens but nothing happens,it does not sync my music to the i pod,i ran the diagnostics and it said No I Pod Found,it shows up has a drive in Window,running Windows 8.how do i get my music onto this I Pod.Thank You.Longlegs

Me2 get the charge sign, but it doesent charge at all.
I use a usb cabel from apple and it still wont charge it.
it needs 2 get charged if i am 2 connect it 2 the computer.
I can only use the usb cable cant charge it any other way.
NEED HELP PLZ

Forms application returns "ORA-01403 no data found" exception on Windows 7

Hi everyone,
I am currently involved in an application compatibility project for an O/S migration from Windows XP to Windows 7.
We have a legacy Oracle Dev6i P18 Forms application that has been working perfectly on Windows XP for the last decade or so. When we installed the same application on Windows 7, it returned a pop-up error message with the text: "ORA-01403 no data found" when performing a certain operation (clicking on a Submit button in a specific form). The same operation works successfully on Windows XP displaying the message "Submit has been successful".
This error is well documented and the solution involves adding an exception handler to the faulting SQL statement(s) in order to handle the ORA-01403 exception. Unfortunately, the application is composed of compiled forms (.FMX) and we no longer have the source code so I can't implement this solution.
I ran a file comparison utility (WinDiff from the Windows SDK) and confirmed that all the files in the application folder and the Oracle Dev6i P18 folder are identical on both the Windows XP and Windows 7 systems.
I enabled tracing in SQLNet.ORA by configuring TRACE_LEVEL_CLIENT=SUPPORT (I know, too verbose) and other related settings on both systems and have uploaded the traces to my SkyDrive for public viewing:
http://sdrv.ms/10BNYtI
The traces show that the "ORA-01403" exception occurs many times on both Windows XP and Windows 7 systems as a result of various SQL statements being executed, for instance:
SELECT TASK_ID,TASK_DETAIL_STATUS,ASSIGNED_DATE FROM TASK_DETAILS WHERE TASK_ID = :b1 AND TASK_DETAIL_STATUS = (SELECT ID FROM V_TASK_STATUS WHERE ABBREVIATION = 'PLANNED' ) FOR UPDATE OF TASK_DETAIL_STATUS,ASSIGNED_DATE
UPDATE TASK_DETAILS SET ASSIGNED_DATE=NTMS_UTIL.GET_SERVER_DATE,TASK_DETAIL_STATUS=(SELECT ID FROM V_TASK_STATUS WHERE ABBREVIATION = 'ASSIGNED' ) WHERE ROWID = :b1
ORA-01403: no data found.
So the same error happens on both Windows XP and Windows 7.
On Windows XP, the error is somehow handled, and does not cause the "Submit" operation to fail.
On Windows 7, however, the error bubbles to the surface and is displayed to the user, thus halting the "Submit" operation.

Thank you. I'm well aware that adding an exception handler is the classic solution to the ORA-01403 error. However, like I mentioned in my original post, I don't have the source code. All I have are the compiled .FMX forms so I can't implement such a solution:
From my original post:
This error is well documented and the solution involves adding an exception handler to the faulting SQL statement(s) in order to handle the ORA-01403 exception. Unfortunately, the application is composed of compiled forms (.FMX) and we no longer have the source code so I can't implement this solution.

How do I get past the drivers not found problem during Windows 7 install?

I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive. I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso. I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows. The system reboots and starts to install Windows 7. Then it pops up an error:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple. So, I copied the Windows Support Software to a USB drive.
Once I get to this point, I can browse to the USB drive and I get the following file tree:
Drivers
     Apple
          x64
     Asix
     Atheros
     ATI
     Broadcom
     Cirrus
     IDT SigmaTel
     Intel
          Chipset
               All
               ia64
               Lang
                    Chip
                         (various languages)
               WIN7
               x64
     Marvel
     NVidia
          NVidiaChipset32
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          NVidiaChipset64
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          Win7_32
          Win7_64
     RealTek
The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7. When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found. I can't get past this point. The Windows 7 installer will not continue. If I select any of the other directories, I get the message "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
Any thoughts? Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league. However, this is a Windows installation issue and I'm getting hung up on device drivers. Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
...Mel
Sr. Systems Administrator - Windows, SharePoint

valid Windows 7 DVD burned from an .iso.
Usually burned ISO to DVD only works when burn speed is set to slowest.
Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
Product support page is best place to start with every device and product.
www.apple.com/support/bootcamp
has manual pdf, faq, how to, support articles

Ipod nano charges but isnt found on computer or itunes

i recently purchased a ipod nano second generation (product)RED and it worked great but now (two months later) the center button dosent always work and when i plug it in to a windows compaq presario laptop it charges but isnt even on the computer or itunes .
i tried using different cords and even on a different computer please help me :[
compaq presario Windows XP laptop

i recently purchased a ipod nano second generation
(product)RED and it worked great but now (two months
later) the center button dosent always work and when
i plug it in to a windows compaq presario laptop it
charges but isnt even on the computer or itunes .
i tried using different cords and even on a different
computer please help me :[
compaq presario Windows XP
laptop
i got it t work i reseted it while it was plUGED IN OK thx n e waY

I pod isnt found atall by windows xp

Similar Messages

Maybe you are looking for