I pod mini doesn't work

i can't start my ipod. i make play but it doesn't work!!!!! help please,i buied it yesterday! ornella

Try to do a Reset, press "select"+"menu" keys until you see the apple logo.
By the way, have your chargered your iPod yet?

Similar Messages

  • Thunderbolt mac mini doesn't work

    Good evening.
    I cannot see my MacBook Air SSD, in target disk, on my Mac Mini mid-2011.
    I tried it with other Mac with success.
    I try too to use thunderbolt Ethernet adapter on my Mac Mini without success.
    My Mac mini is on Mac Os X.7.5.
    Thanks.

    I just want to use my thunderbolt port on my mac mini and it doesn't work.
    I know built in options of my Mac mini.
    i said just that i made two tests :
    with an thunderbolt -> Ethernet adapter,
    with my MacBook Air in disk target mode.
    All were without success.
    I tested disk target mode of ma MacBook Air with an other MAc with success.
    Thanks.

  • Mac Mini doesn't work:appair only a flashing question mark on the screen

    I try to startup the Mac Mini but the only think that appair on the screen is a white page with in the middle a folder with a flashing question mark.
    The Operative Sistem doesn't work:i wanted to try to inser into the CD of OS X and reinstall all but there is just a CD into the Mac but again with botton or with muose clicked ,the CD doens't go out.
    Please Mac's users help me.
    Bye. Alskarez
    Mac Mini   Mac OS X (10.4)  

    The flashing question mark means that the mini is not able to find a copy of MacOS to boot from, which is likely why you inserted the OS X disc.
    If the disc that is stuck in the system is the original MacOS install disc that came with the mini, you should be able to boot to it by holding the C key down as the system is starting up. Some non-Apple or wireless keyboards don't allow starttup modifier keys to be used, but if yours is an Apple keyboard it certainly should. If it IS the original install disc in the system and the C key doesn't work, and you're left with the flashing question mark, it sounds like you may have a significant hardware fault which may have caused the mini to fail to see either optical or hard drives.
    It may be that in that situation a PMU reset (for PPC minis) or an SMC reset (for Intel models) might restore operability, but if not, then you'll likely need the assistance of an Apple approved service provider.
    To reset the PMU in a G4 mini:
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.

  • HDMI to TV as Display for New Mac Mini DOESN'T WORK

    I bought a new Mac Mini and was told I could us HDMI to my TV as display.   I was using this TV as display for older Mac Mini (VGA) and for a Windows PC, and DVD via HDMI.     TV is one year old. 
    The Genius at the store who sold me the new mini said all I needed was an HDMI cable.   Which I purchased. 
    The screen comes up for the Setup Assistant but as soon I select continue is goes to gray, mixed color scanning garbage mode.    If I turn the TV off and back on, the screen returns (now at the next prompt in the setup assistant) but again it goes gray after hitting continue.    Unusable, CANNOT set up my new purchase.
    Unfortunately, the DVI to VGA adapter on my old mini is different and doesn't mate to the HDMI to DVI adapter that ships with new MacMini, so I can't test VGA.   The old DVI to VGA has extra pins not on the new one. 
    My purchase is not usable and is extremely poor.   Buyer beware I guess.   

    I have been using MacMini's for commercial digital signage/video conferencing gateway usage for sometime now, they all have HDMI output, about one third are on Lion the others still on Snow Leopard, here's what I have found.
    Toshiba & LG tv's are generally reliable, Samsung and Philips generally are not, Panasonic, Sony, Sharp & Viewsonic all work, somtimes with a bit of work from me.
    Cables are important (always look for compatibility with HDMI  revision 1.3 or greater (1.4 preferred), don't waste your money on exotic brands, adhere to the distance limitations, I generally send the HDMI signal wirelessly (cost of labor to add wiring to an existing space can be very high) so am limited to less than 50ft, same as with a wire.
    READ THE TV MANUAL, find out what HDMI choices your tv possesses, is there a 'parallel' audio input available for the times when your signal origin is a MDP or DVI.
    Some TV's just don't work well, cut your losses and get another when faced with this issue.

  • My 4GB Ipod Mini Doesn't Work

    My Ipod Mini stopped working and anytime I try to charge it, the screen displays the Apple logo and then a low battery logo. I tried charging it for more than 12 hours, but the two pictures remain the same.
    Compaq   Windows XP  

    Did you try these?
    iPod won't turn on.
    iPod battery doesn't charge.
    Your Windows PC doesn't recognize the iPod is connected.
    iPod shows only an Apple logo and doesn't start up.
    When restoring the iPod, it's recommended to put it into disk mode first.
    Putting iPod into disk mode.

  • Newly created passcode to iPad Mini doesn't work!

    I recently upgraded my OS software on my iPad mini like I always do when requested.  I created a passcode like it asked me to do.  Today it won't work.  How do I check to see what passcode I created and to verify if what I typed is what I thought I created?  I can't get into my iPad Mini!

    Hello MacGymnast,
    We've an article that provides the options available to you for restoring access to your iPad.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Cheers,
    Allen

  • Two buttons on my i-pod mini aren't working!

    the two buttons that aren't working are the menu and the play button. when pressed, the menu won't do anything and when the play button is held down it won't shut the mini off.
    one reason could be that i was fiddling around with it a bit while my hands were wet! could it be possible that it got water damage?
    this just happened a few minutes ago! help greatly appreciated! thank you in advanced!

    Have you tried The Five Rs?
    Also, check out this.
    iPod touch-wheel is unresponsive after waking from sleep.

  • Black magic design UltraStudio mini doesn't work with FCPX

    Does anyone have an idea why FCPX does not recognize the Black Magic Design UltraStudio Mini monitor?
    The mac pro (late 2013) sees it in the thunderbolt bus. Adobe Premiere sees it and uses it just fine, but FCPX doesn't.
    in the FCPX preferences for AV output it says: no device found.
    to answer questions:
    Mac Pro late 2013
    3.5GHz Xeon E5
    AMD Fire D500
    Premiere Pro CC 2014 8.1
    FCPX 10.1.4
    BMD Desktop Video Version 10.3.2
    so all apps & drivers are up to date.
    Thanks In Advance

    As I put in a separate post. I can't find how to enable the high contrast feature in ADE. I can't find the command in the keyboard command help - but then again I'm trying to read black on white which is very hard for me.
    ADE might not officially support Magic but the problem I have is that if I enable the magnification feature within Magic then the ADE window freezes and wont change. This is a problem which needs sorting out.

  • Keyboard on iPad Mini doesn't work correctly

    I have an iPad mini retina display 16GB model ME279B/A
    When I type, all is fine using English/UK QWERTY keyboard but when I try to type a ! with the !/, key I get a ' and when I try to type a ? with the ?/. I get a "
    How can I rectify this problem please?
    This also is not app specific
    tia

    The ' and " are alternate selections for those keys. If you press and hold on those keys you will see those choices.
    Apparently, when you are typing, you are holding the keys down too long and getting the alternates.

  • Skype on iPad mini doesn't work as the app is not requesting the microphone

    I'm running the latest version of Skype on an iPad mini with the latest version of IOS 8. The problem is that Skype won't request access to the microphone, meaning that I can't grant it access.

    The ' and " are alternate selections for those keys. If you press and hold on those keys you will see those choices.
    Apparently, when you are typing, you are holding the keys down too long and getting the alternates.

  • Subscription to Myanmar 60 mins doesn't work, but ...

    Hi, please help me to solve a problem with my subscription.
    I have paid for it 19th of March, and my order no is Order No. 595160215.But when I called to myanmar it was a note there that I overused my limit and subscribtion will start automatically 20th of March even I not used any minutes . Money are taken from my account. The billing information shows the transaction of those money. I looked at the histroy where the subscription was successfully delievered... BUT, not so successfully as far as  today is 21th and still nothing. When I try to call, it informs me of not enough credit and offers to acquire skype credit . I hope I will receive an answer as quick as possible, because it is emergency for me to call (to MYANMAR, mobile phone), and I have skype only. Thanks. 

    I exactly have the same problem with my subscription for 400 minutes France
    My subscribtion should have been renewed by the 19th already but my account screen still announces that I have 0 minutes left and the information tag says "Renews on Mar 19, 2012" ...
    March 18th I received an e-mail from Skype confirming the order delivery (Order number: 595106329)
    However, I don't find the payment on my credit card ... even if it's an automatic debit operation ... But how come I received the order delivery confirmation ?
    I hope I'll be able to use the Skype services very soon again as calling cell phones internationally is quite expensive without ...
    Thanks a lot in advance !

  • Two finger trackpad scroll doesn't work in Mac os 10.9

    I just upgraded to Mac OS 10.9 and noticed that the little arrow buttons on the bottom of the scroll bar is no longer there.  So I looked into other alternatives to scrolling windows up and down and found that the trackpad has the ability to do so using the two finger scroll feature.  This would be great, except mine doesn't work.  Other trackpad features work, but the scroll up and down does not.  Any ideas to get this to work?

    Use OnyX to clean your system and User cache files. It's free to download. Just click on the "Automation" tab, check the boxes and run it.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • TouchScreen Monitor + mac mini = don't work

    There is a big monitor with TouchScreen. It works fine connected via USB with any computer with Windows XP or Windows 7. But it doesn't work with mac mini. What I have to do to force it to work normally?

    alvacom wrote:
    I use USB wire which was together with monitor.  Any other computer with Windows works fine with this USB wire. Anybody knows why mac mini doesn't work?
    When you say it does not work, what do you mean? Do you mean no video appears? If so you need to connec tthe monitor to the Mac via VGA, or DVI, or HDMI, or Displayport, etc.
    If however you are referring to the fact it does display an image but the Touch screen capability does not work, then this is almost certainly because your Mac does not (at this point) have the right software drivers installed to enable this capability. The reason the Windows computers work is either because they already have the drivers installed or because Windows has automatically downloaded and installed the drivers.
    You also don't detail what make and model of monitor you are referring to. It is possible some makes and models can be made to work with the right software (for Mac). However be aware that some makes/models only support limited touch capabilities, for example most HP Touchscreen displays only support two finger touches and not three or more.
    In response previously to someone else who wanted to use a HP Touchscreen with a Mac I found this website http://touch-base.com/download.asp which has drivers for various makes and models of touchscreen display.

  • I am using Photoshop CC2014 15.00.  In the pop-up menu for the Fill command there is a place for Scripted patterns.  Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

    I am using Photoshop CC2014 15.00.  In the pop-up menu for the Fill command there is a place for Scripted patterns.  Within that part, the tree and the picture frame are grayed.
    Why?   I've seen demonstrations on how to use the feature but mine doesn't work.  I checked the updates and I have the current version.
    Thanks.      LM

    I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

  • 5300 silence button doesn't work

    Hi!
    It seems that my silence button (in the numpad, the one with #) doesn't work. The manual says that we only need to hold it down for a few moments while in the main screen. But mine doesn't work
    Any know issue, or is an ignorant user problem?
    thanks in advance
    Fernando

    Don't worry its not your fault.Actually, its a firmware bug.I assume you've got the latest one (v5.10).Lets just wait and see if the upcoming firmware will fix this error.

Maybe you are looking for

  • Embedding view in view container UI element

    Hello,    I have a requirement which is given below:   I have a MAIN view where there is a view container UI element. This container holds one of 3 views(VIEW1,VIEW2 and VIEW3) depending on user input. Initially VIEW1 is displayed (this is set as the

  • Material return to store?

    hi i have made a maintenance order and i want to return a component to store.so i have put -1 in the component quantity and reservation no(movement type 262) is automatically  created.now i want to post the material through mb1a but when i put the re

  • How to embid java code in JavaScript

    Hi!! I am writing JSP program. Do u know how to embid java code in javascirpt ex: <SCRIPT> alert("hello"); <% System.out.println("Hello...Satish. "); %> </SCRIPT> This alert message is not comming when i add the java code.

  • Standby log files

    I want to convert our old script based primary /standby database into a dataguard config using the LGWR as log transport. I already have old log files on the standby database, but the data in them is from 2004. Not entirely interesting since the data

  • How do I fix the App Store app in mountain lion which has become corrupted and won't update!

    I can no longer access the App Store so cannot update my system. Ant Ideas?