I pod nana third gen not working

Im having problems with my 3rd generation ipod nano. Its served me well since i bought it with no problems, till now. My nano no longer can run without a cord hooked in it. When i try to charge it it wont charge but it will run and play songs. When i connect it to the computer it gets a white screen. Any Advice?

Went to a RadioShack and they found i had a fryed battery. Im not sure of the cost for a new one so im just going to buy a new ipod when i get the money.

Similar Messages

Ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6

ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6?????

Have you went to Bose's support site?
Sometimes an iOS update breaks compatibility
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the Bose unit
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem then there is nothing you can do except see it Base has firmware update.

My i-pod fifth generation is not working both because of the change of address and also because of the change in password!

I am trying to revive my i-pod fifth generation because it has not been set up yet!! I am looking to wipe out everything on my i-pod and clean it out!!
Thank you!
Shawn Stopper

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Then to setup the iPod yo will have to enter the ID and password last used in Settings>iCloud on the device.
If necessary:
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.

Ipod 6th gen not working

Hi there, I bought an ipod 6th gen just over a year ago, while using it, I noticed the screen get grainy just before my battery went low. Now the screen is black and wont charge. I am wondering if it is the battery or the ipod itself. I never dropped the ipod or abused it anyway, I dont really want to buy another one, if this is going to happen, has anyone else had this happen, or know what the problem is?

jeffreyfromottawa wrote:
ipod 6th gen nano frozen, reset not working, help steps on web site no help?
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

IPod 3rd gen not working with universal dock

My old iPod 3rd gen (15GB, touch wheel, dock connector) worked great with the old dock, until the latter started scratching noises when outputting audio to my stereo. Still charges the iPod though.
So, I tried old iPod with the universal dock I got for my Touch and found the following problems:
1. iPod is not being charged through new dock plugged to wall adapter
2. touch wheel menu control is not working as long as iPod sits in universal dock plugged to the wall adapter - the sound of clicks is all I get, but no control of menu or any other function. In order to select playlist or use any other function through touch wheel or any of 4 buttons I need to unplug power from the dock (it is not charging anyway)
3. remote is not working at all
Otherwise playback is OK.
Any ideas what may be the culprit here? Apple states that Universal dock is compatible with 3rd generation of iPod and up.

Hello Andrew,
What a coincidence as I too have had to find a new dock for my 3rd gen ipod. This week I purchased an Apple AV Connection kit - but found that it would not charge the ipod or respond to the remote. I also bought and tried a Belkin AC adapter with cable to power up the ipod but it too would not charge the ipod.
To see if these units were working I connected them to a friend's brand new ipod classic and both the Belkin and Apple AV Connection Kit worked fine - so there is something different about the 3rd gen ipod.
I'm not sure if this helps you - but at least you know it's not just your ipod that is not working with the new dock.
Nick M.

IPod Nano (1st gen) not working... seems to be dead...HELP!

Havent used my iPod in awhile. Went to plug it into computer to charge and got a screen that flashed the apple logo a few times and then went to a screen with a charging symbol but not the normal one (had gray plain background and lack symbol). Computer does not reconize iPod. I tried many of the things apple suggests but it has not worked.
Message was edited by: joeyman500

Have you tried Resetting your iPod (hold down the menu and center keys for 6 seconds) while it is connected to power? You may have to try several times.

Ipod Shuffle (2nd gen) not working with iTunes 11.0.4

I have my shuffle set to Manually Manage songs, and can view and add to the Ipod through 'On this Ipod' but highlighting songs and hitting the delete key is not working to remove songs. The process works for my other Ipods including my Touch and Classic. I don't want to 'restore' my Ipod because some of the content is only stored on a computer that isn't working at the moment, I just want to get rid of some of it to make way for new stuff.

Actually it turns out I can't even add to it. It claims it's synced to another library (which apparently is true, being as it was last used with my Macbook Pro). Somewhat new question, How do I combine the two libraries, as it's all mine, just on two different computers, one of which doesn't work unless it's in Hard Disk Mode.

Ipad 4th Gen not working at all

Hi
I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciated

Hi Try this Connect USB lead to pc hold down power button on iPad connect Lead To iPad still hold button down Wait to see if pc sees iPad keep button down for upto 1 Minute. If that doesn't work make An Appointment at Apple Store. Cheers Brian

I-pod nano 1st gen not recognized by computer

We took this in to the apple store and had the i-pod restired, but neither of our computers (Windows XP) will recognize the i-pod nano now. It has been giving us problems for the last month, and when it did last work, it would only allow 6 songs to be stored.
Any ideas?

If they restored the iPod in the store, they used a Mac.
You'll need to restore it on Windows.
Is the iPod recognized in "my computer" but not in iTunes?
See any or all of these.
Putting iPod into disk mode.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

Ipod Nano 1st gen not working

Hello all
I have a Ipod nano 1st gen 2gb. I can restore it, reset it with menu select key, but everytime it starts it loads to the lanuage screen and i can not click to get further into the ipod, it use to work before i upgraded the firmware to the new 1.3.1. is there away to downgrade back to like 1.1.9. I am running vista 64 bit so i cant run the 32bit restore program to try that. If there is anythign anyone can think of that will be great. Yes i have reset it via the menu key and select key like 1000 times...

I downgraded the nano from 1.3.1 to 1.1.1 then down to 1.0 and then back to 1.3.1 and still the same thing, no select function upon the Language Screen. Anyone have anything else i can try?

Ipod shufffle 1st gen not working

Hi...
I have a 1st gen Ipod shuffle.I was listening to music and it suddenly stopped working. It won't turn on (lights do not blink) and when connected to the PC the light doesn't even blink. What do I do?
Pls help

If the lights (front and back) do not come ON when you connect it to power, it is likely to be a hardware problem.
If the shuffle ran out of power when you were listening to it (and that's why it "suddenly stopped working"), and now will not charge when connected, it could be a problem on the shuffle's built-in USB plug. It tends to become worn out (or damaged) over time. It's probably the most common failure point for the original white plastic shuffles.
If you recall that the battery had a good charge when it stopped working, then the problem could be on the shuffle's logic board.
You should rule out a problem with the USB port on the computer. If you are using a USB hub, try a direct connection on the computer's port, with other USB devices disconnected (you can leave standard keyboard/mouse connected). If you don't see the shuffle's light come ON, try something else on the same USB port (preferably something similar like a USB flash drive or port-powered external drive) to confirm the port is working properly. If you have a USB power adapter, you can also try connecting the shuffle to it.
If you can rule out a problem with the USB port, and the shuffle's light does not come ON when connected, it is likely to be a hardware problem on the shuffle.

[Solved] UTF-8 locale-gen not working

$ cat /etc/locale.conf
Lang=en_CA.UTF-8
$ locale -a
C
POSIX
en_CA.utf8
$ locale
LANG=C
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_PAPER="C"
LC_NAME="C"
LC_ADDRESS="C"
LC_TELEPHONE="C"
LC_MEASUREMENT="C"
LC_IDENTIFICATION="C"
LC_ALL=
$ cat /etc/profile.d/locale.sh
#!/bin/sh
unset LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES \
LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT"LC_IDENTIFICATION
if [ -n "$XDG_CONFIG_HOME" ] && [ -r "XDG_CONFIG_HOME/locale.conf" ]; then
. "$XDG_CONFIG_HOME/locale.conf"
elif [ -n $HOME ] && [ -r $HOME/.config/locale.conf ]; then
. "$HOME/.config/locale.conf"
elif [ -r /etc/locale.conf ]; then
. /etc/locale.conf
elif [ -r /etc/rc.conf ]; then
LANG=$(. /etc/rc.conf 2>/dev/null; echo "$LOCALE")
fi
export LANG="${LANG:-C}"
[ -n "$LC_CTYPE" ] $$ export LC_CTYPE
[ -n "$LC_NUMERIC" ] $$ export LC_NUMERIC
[ -n "$LC_TIME" ] $$ export LC_TIME
[ -n "$LC_COLLATE" ] $$ export LC_COLLATE
[ -n "$LC_MONETARY" ] $$ export LC_MONETARY
[ -n "$LC_MESSAGES" ] $$ export LC_MESSAGES
[ -n "$LC_PAPER" ] $$ export LC_PAPER
[ -n "$LC_NAME" ] $$ export LC_NAME
[ -n "$LC_ADDRESS" ] $$ export LC_ADDRESS
[ -n "$LC_TELEPHONE" ] $$ export LC_TELEPHONE
[ -n "$LC_MEASUREMENT" ] $$ export LC_MEASUREMENT
[ -n "$LC_IDENTIFICATION" ] $$ export LC_IDENTIFICATION
So how to get en_CA.UTF-8 in effect? And why isn't in effect automatically? I installed recently and followed the locale-gen procedure. Only graphical stuff installed is i3, qupzilla & smplayer, no gnome or anything. I guess it's not related, but Dvorak layout is working as per vconsole.conf. Thanks
Last edited by stozi (2013-09-30 14:33:29)

stozi wrote:thanks I have read it, didn't find anything that would help. still want to know how my /etc/locale.conf could have the wrong formating when it's never been manually edited.
Asked and answered. You need to edit that file - this is described in the Beginners guide and installation guide (edit: and several times on the locale page).
Last edited by Trilby (2013-09-30 14:29:04)

Pod Casts - auto downloading not working

On a WIN7 PC, running ITunes v12.0.1.26 I subscribe to multiple Pod Casts.
All are marked to
Subscribe = ON
Limit Episodes = NO
Download Episodes = ON
Delete Played Episodes = ON
Only the first pod cast in the list is following these rules.
The other pod casts do not auto download.
If I hit the REFRESH button, it shows that the last update was in 12/2014, when I manually downloaded the latest updates for that pod cast.
Any ideas?

I finally solved this by changing the Auto-Lock settings. Mine were set to Auto Lock in 2 minutes. I changed the setting to 15 minutes and my New Yorker Magazine downloaded without incident -- although it took much more than 15 minutes. (I now suspect that my prior setting was the reason my Newsstand publications never downloaded automatically.) I have now reset Auto-Lock to "Never" to test whether that works in the future for automatic downloads --basically because my DSL speed is not optimum.

3rd gen not working in car!! Help please!!!

Evening people,
I'm looking for some help with linking my 3rd gen ipod to my modular car stereo system in a Mazda MX 5 02 reg. I've purchased a lead to link it to the stereo...works fine with an ipod mini but is supposed to work with all ipods. Basically it advances tracks and fast forwards by using the controls on the existing car stereo.....like I say it works fine with the mini but when I fit the bigger version in, it'll only play through the speakers but won't advance. Any ideas? Trying to avoid the hassle of selling the ipod for a newer version......could it be that the mini doesn't have the 4 control buttons like the 30GB one?
I'm confused!!! Please help as it's driving me insane.

Hi,
I mentioned the Field length as 10 in XSD.
And in syndicator if the text in the field is 30 in length, the output xml generates with 30 charecters...
So by this i can conclude that, it is not chopping as per rules in XSD.
Also i have fields of types such as String -Integer -Decimals in the XSD.
But when i load that XSD into MDM, i can see in syndicator that all the fields are of type Text (automatically..)..
So the Field type that you specify in the XSD is not shown/Active Once that xsd is loaded into MDM.
Does anyone disagree with this statement.
Note: I am aware that we can restrict the field length by mentioning the Field length in Console table-Field properties.
Also in the Syndication map -> Destination items -> Max Item Length..
What i am checking is, isit worth to add these Field lengths/Field types/Restrictions in xsd?
Kind Regards
Eva

Why is my wifi on my ipod touch 2nd gen not working?

Can someone help with the wifi on my ipod touch 2nd Gen? Yesterday it suddenly stopped connecting to anything wifi. No settings were changed. The only thing I did was go to itunes for the first time in well, forever. I always use it on my computer to go in itunes, not my ipod. Anyway, I'm pretty sure I could still get on Safari after that but I don't really remember. At some point in the evening it stopped connecting. I can't get on Safari, my mail won't refresh, it would connect to the app store, nothing. Sometimes a message does pop up saying there was a problem connecting to the server. I can't figure this out, internet on my computer is running perfectly fine. My ipod wifi is on, airplane mode off. When I go into my settings it shows my network and that it's connected. I haven't connected it or synced it to the new itunes. I actually haven't downloaded the update yet. Ipod is up to date though without the new sync. Can anyone help me out? I'm very confused.
Thanks

Does the iPod connect to other networks?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I pod nana third gen not working

Similar Messages

Maybe you are looking for