I pod nano bluetooth cuts in and out in car speakers

My i pod nano bluetooth cuts in and out from my car speakers. Everything else seems to work fine. Ideas?

Something is interfering with the signal. Try turning any devices with WiFi that are with you off.

Similar Messages

  • Bluetooth speakers cutting in and out while typing

    Anyone have any issues with there bluetooth connection to speakers for yoga 11s on windows 8.1?
    The sound from the bluetooth speaker cuts in and out when my palms are resting on the keyboard while typing.. The connection seems fine in tablet mode or if I'm not touching it. 
    i've tried updating the drivers and still no improvement.

    It also Does NOT cut out like this on skype.

  • AirPlay Audio Cuts in and Out

    I have had major issues in the past six months with the audio from my AirPlay where there used to be none. For a long while I used an elaborate setup from my 2nd gen AppleTV, to a optical audio out to a quarter inch converter to an AudioEngine wireless dongle to my receiver with flawless results between 2013 and late 2014. When problems started occuring I naturally figured it was the wi-fi network, I did some serious reconfiguring to get as strong and clean of a wi-fi signal as possible, still had the issues. I finally decided to simplify the whole setup to an AirPlay compatible Denon AVR-x1000 stereo that hardwires to my wireless router. All was good for a week, now its worse than ever, even resetting the internet and the router will not seem to get the AirPlay from cutting in and out. I have an iPad, an iPhone 5 and a Macbook Pro, and an AppleTV all connecting to the receiver. All have the same cut in and out problem that existed before the receiver and after. It seems every update makes things less stable not more. Is there someone who can help walk me through a fix or just tell me AirPlay no longer works so I can stop trying?
    Please help!!!
    Here is my setup -
    Macbook Pro 15-inch, Mid 2012 - 2.6 GHz Intel Core i7, 8GB RAM Running OS X Yosemite 10.10.3 connected by Wi-Fi
    Denon AVR-X1000 AirPlay enable receiver connected directly to router via ethernet
    Netgear Dualband Wireless-N Router WNDR3700 - 2.4GHZ Channel has a 92% Signal and the 5Ghz has 85%
    Internet Connection is fast and consistent 72MBps Down 10 Up
    2nd Gen AppleTV connected via Wi-Fi
    iPhone 5 iOS 8.3
    2nd Gen iPad running iOS 8.2
    I have shut off bluetooth on anything that has it to avoid interference. The video of the appleTV works just fine and the Airplay Icon is consistently available, this is an AUDIO issue.
    ***There is another 2nd Gen Apple TV in a separate room (weaker signals all around) connected to the same network that works flawlessly streaming audio and video from any device.***

    Hello Mikeh42,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPlay please follow the steps listed in the article linked to below.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Take care,
    Alex H.

  • My blutooth headset cuts in and out based on the position of the gen 4 ipod touch, any ideas as to why this is and how to fix it?

    When using a blutooth headset with my ipod touch the signal seems to cut in and out. The controls seem to work fine but the audio cuts out when the unit is moved or placed in my pocket.

    Could be interference
    AirPort and Bluetooth: Potential sources of wireless interference
    Try:
    - Reseting the BT headset
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin all wifi networs and re-pair all BT devices

  • Having a problem with iphone 4S. Phone calls are getting dropped and cutting in and out.

    I seem to have very little or no service at all recently.
    All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
    I called Verizon yesterday and tried a few things they suggested but nothing worked.
    I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
    Not sure on what else to do.
    I am extremely frustrated and annoyed that I cant even really use my phone.
    HELP

    If the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
    Make an appointment at an Apple store if there is one nearby to confirm.

  • I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone?

    I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone for some reason but for 2 years previous it could no problem?  tmobile says it is a problem with my phone and not their service.
    Any ideas what to do?

    I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
    If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414).  You will be given the option to restore to that backup at the end of the restore process.  Your messages are stored in the backup so restoring to the backup will return the messages to your phone.  Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

  • Sound cutting in and out on Macbook Pro 15 (original) when waking display

    When I wake the display from sleep, any audio that was playing when the system went to sleep - or rather, the display went to sleep (ie: pandora, QT movie, etc), immediately starts to cut in and out and gets glitchy. This happens as soon as I move my mouse and get the dialogue box to enter my un/pw to wake from sleep. The only way to resolve it is to quit the application putting out the audio, and then open it up again. Once I do that, the problem goes away.
    Currently running 10.6.2, but have had this problem since upgrading to Snow Leopard. I've searched the forums and can't seem to find any answers. There are a lot of vague sound issues with MBP and this is a hard one to "sum up" in the subject line. Any help would be appreciated. Thanks.

    I've searched the forums and can't seem to find any answers.
    Not even quitting out the audio application prior to letting your computer sleep?
    Not sure what you have already tried from searching the forums. If you have Applecare, give them a call or take your computer to an Apple store. Let the Geniuses there check it out.
    Message was edited by: CMCSK

  • I have iTunes version 10.7.0.21 for Windows 7.  It was working fine untill recently.  Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards.  What is causing this and how do I fix it?

    I'm having problems with video play back in itunes 10.7.0.21 for windows 7.  Video was playing fine, but now I'm having audio issues.  Audio cuts in and out.  Also video pauses and fast forwards.  Does anyone know what would cause this all the suddenly?  More importantly does anyone know how to fix this?

    All sorted now. Thread can be closed!

  • Logic Pro X Audio cutting in and out

    When I am trying to record in Logic Pro X the audio seems to cut in and out at random points.
    I have a MP3 track that I am recording to and it just randomly cuts out. Even when just playing that track by itself the same thing happens though never at the same spots. If I open the MP3 in Itunes or Quicktime there is no problem with the track.
    As this seriously messes with the time of the piece and makes the recording long and painful I need help.
    Is there some type of connection I am missing? I am using an old Presonus Firebox as an Interface, it unfortunately has adaptors to take it from firewire to thunderbolt. Recording into a 27" Imac that is very souped up and shouldn't have any problems until I hit a hundred tracks or so and I am only trying two.

    It's most likely the Fusion drive, one of the symptoms is audio cutting out.
    There are several related threads in this forum regarding audio problems with the Fusion drive.
    This thread alone would take a couple of days to read.
    https://discussions.apple.com/message/24709429#24709429
    A fix is supposed to be coming in the next operating system update.

  • TS3367 FaceTime sound is cutting in and out

    Since updating to os7 the sound on FaceTime calls is cutting in and out.  I'm on iPhone 5 and the other person is on iPhone 4 , the other persons sound is fine.  This only began when I updated to the new operating system.

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • Anyone help, my laptop cuts in and out of charge

    When on charge, my loptop cuts in and out of charging making the battery go down. I have only had laptop for one month. Is this a common falt?

    SMC = system management controller.
    Here's the long answer.  The power adapter senses power problems both at the input and the output - I mentioned protection circuitry at the DC output end.  When the power adapter senses an AC line voltage input problem (even if it's less than a cycle), the adapter may momentarily stop charging.  I believe that's what is happening to you.  There are many reasons that this could happen: loose AC wiring at a switch or outlet, loose ground wire, line in-rush over-voltage, even something as simple as someone cycling a flourescent lighting fixture can cause a problem.  To resolve this, you can:
    Try a different power adapter.  Due to a internal component tolerance stack-up, an adapter may be hyper-sensitive to AC line noise.  If a second power adapter does the same thing, you can:
    Get an AC line conditioner.  I'm guessing a $75-100 unit would do the trick.  If that doesn't work, you can:
    Use the ungrounded, two-prong "duckhead" for the power adapter.
    Cheers!

  • Audio Is Randomly Cutting In And Out In Playback

    I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
    Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
    Please help, almostly completely unable to edit. Thanks.

    I am still having the same issue in Premiere CC 8.0.1 (21)
    Exact same issue as the original poster on this thread, as well as the original poster on this other thread:
    Premiere Pro CC Audio Cuts Out
    So this audio issue persists from version 7 now in version 8.0.1!
    For me, audio is cutting in and out randomly and never in the same place. If I have multiple audio tracks on the timeline, then one or more tracks might drop-out at the same time. Sometimes all tracks drop out at the same time. It seems completely random.
    I am editing with a combination of P2 footage and DNxHD 290 footage. (I originally had some AVCHD footage, but then I transcoded all of it to DNxHD 290 -- but this did not improve the audio issue at all.)
    Two of my audio tracks contain the native camera audio (stereo); 1 track has the music bed (stereo .wav files) and 1 track has sound effects (stereo .wav files)
    In one of my projects, I had a very strong reverb effect applied to the track (not to the clip). When the audio dropped out, I could still hear the tail of the reverb. This leads me to conclude that it's not the entire audio track that is muting -- it's definitely the source audio clip that's dropping out. The reverb tail continued after the audio dropped out.
    Playing the same part of the timeline again produces randomly different results -- audio might drop out on a different track, or at a different time, or not drop out at all.
    This bug is making it nearly impossible to edit! I have filed a bug report at http://www.adobe.com/go/wish_fr
    During timeline playback, my CPU utilization never goes above 15% and at least 12 GB of RAM is staying free, so I am pretty confident these drop-outs are NOT caused by lack of computer resources. Also, my hard drives seem to be fast enough to play back 4 streams of HD simultaneously, but I am getting these audio drop-outs when playing back 1 stream of HD plus 4 channels of audio. Therefore, I don't believe this can be a hard drive bandwidth issue.
    System specs:
    Windows 7 64 bit, SP1
    RAM: 24 GB
    CPU:  Intel Xeon X5680 @ 3.33Ghz (12 threads)
    VIDEO:  NVIDIA Quadro 4000

  • Sound cuts in and out

    I am running Mainstage 3.0.3 on my MacBook Pro - 13" (early 2011), OS X 10.9.1, 2.3 GHz Intel Core i5 processor, 8GB RAM and running on a Samsung 500GB SSD drive. I am plugging in a bass through an M-Audio USB Fast Track.
    Using this right now simply to play along with tracks on iTunes (for practice). Used to use Garageband for this, but then I got Mainstage. Mainstage 3 was running fine when I first bought and downloaded it. Not sure what the problem is now, but when I open it and create a new concert (bass-rig) then turn the master volume up, the slider movement is choppy and the sound/signal cuts in and out (more out than in). The only time I can get sound to consistantly come out is if I click on a menu option, like File or Edit or Action, etc... if I click off the menu, the sound cuts back out and I get nothing.
    Sound works perfectly fine through Garageband with the same setup.

    That's the model of your processor in your HP P6350z. Do you have a discrete (separate) audio card in your PC?  When you purchased your PC did you add a separate audio card?  If not, then go to www.realtek.com and download and install the latest audio drive for the Realtek ALC888S.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Airtunes cutting in and out when using the internet.

    Hi all,
    I know this topic has been covered before and there is a support page for this problem on the apple website but I haven't been able to fix the problem using either hence the post so sorry for repetition.
    As the title says my airtunes keeps cutting in and out, but it only seems to happen when I am actively using the internet. What I mean to say is that if the internet is connected and sitting there dormant it works fine, but as soon as a start to surf or download it cuts out, the higher the download/upload rate the longer the cut outs are until it stops all together.
    My network contains the following,
    2 Computers (1 iMac and 1 MacBook Pro)
    1 Airport Express
    The iMac is the host of the network, it also is the provider of the internet via a USB mobile broadband stick shared out via Airport (which cannot be connected directly into the Airport Express). Airport Express is used purely for Airtunes.
    I could not change the channel setting to test for interference in Airport Utility as the iMac was the host. I tried changing the whole network channel on the iMac but the cut outs still occurred.
    I use the MacBook Pro to send the audio from iTunes to Airport Express, distance would only be about 4 meters with no physical barriers such as stereo/cables/walls etc.
    Any suggestions would be much appreciated.
    Cheers,
    Jarrod.

    Any idea's please?

  • Airport Base Cutting in and Out

    My Airport base station has started cutting in and out and restarting it only sometimes works. Once returning to detectable signal, it may work for seconds, minutes or hours.
    For four years, we have had a flat-screen iMac, an eMac and a network printer working without a hitch. Recently, We added a MacBook Pro, also without a glitch. Suddenly, in the past three days, the signal has frequently become undetectable, even at the iMac only 2 feet away.
    Clearly, it does return to use, as I am using it now. Leaving it in use (e.g streaming a radio over internet) seems to keep it active, but I am not sure for how long.
    I've tried it all: turn Airport on and off; unplug and re-start base station; unplug and re-start DSL modem; repair permissions; name it.
    The unit seems to have spontaneous regeneration as it seems to work after sitting unused for a while (though I have to log back in, which I have not had to do in the past).
    All three computers are running 10.4.5 and all have the latest Airport updates.
    Is there something else to try? Do I just go for a new base station? Could it be something outside--DSL, electronic interference, etc? (No new electronics in the house.)
    Airport Base Station (not Extreme--Snow?)   Mac OS X (10.4.5)  

    yes, am experiencing a similar problem.
    brand new iMAC intel, with firmware upgraded. 10.4.6
    when I try to do a software upgrade, I can begin the download. it goes for about 2 mb or so, and then cuts out.
    no signal, download is stopped...but a few seconds later the airport signal is back on at full strength.
    am going to try the suggestion of channel change
    georg

Maybe you are looking for