I POD not charging when I tunes recognise it

Hello,
Just bought a video I-POD 60 GIG.
I installed the CD, connected the device and left it charging for 24 hours. Then I created a library synchronized it and start enjoying the music.
I let the battery run just to see how long those would last.
I then plugged the i-pod again. Here what happens:
1) Plug I pod
2) Do not disconnect warning pops up and battery start charging
3) I tune starts
4) I tunes recognize I-pod and synchronies music battery still charging
5) Synchronization end and Battery STOP CHARGING
Why batteries stop charging? Has anybody experienced something similar?
I run Win 2000 on a dell D810 laptop. I have 4 USB 2 ports if I choose not to start I-tune automatically when I connect I-pod this charges without any problem.
I uninstalled I tunes re-installed it but no success.
Any help appreciated.
Thank you
Enrico

Thank you for your reply, but since when this happened the battery status icon was rd I would assume the battery is not fully charged and should start charging.
Also when the I-pod goes to sleep there is no sign of battery icon.
Might be an I-tune bug?
It may be the battery is charged up already. When iTUnes gets done syncing the iPOd it goes back to the main menu on the iPod and there will be a baby sized icon in the top right corner with a battery and a lighting bolt on it, after awhile the iPod goes into a semi sleep state this is when the battery icon will cover the screen much like the "DO NOT DISCONNECT" Icon http://www.apple.com/support/ipod101/anatomy/3/

Similar Messages

HT201401 iphone 4s not charging when power ON

iphone 4s not charging when power ON

Amish/ Selvars4, i have exactly the same issue. I'm sure its software issue as mine has done it also just last week. i had it happen previously about 3 months ago also. the phone would only charge via a USB from a pc or if the phone was turned off.The way i got it working last time i kept reloading previous version of the phone back up and finally it worked normally again. It was always visible to iTunes so not an issue. Last week though i have had exactly the same problem as Selvars and itunes cannot see it now, and not charge by any device except when turned off. I did a backup and iTunes sync about 2 days before this problem started. (now thinking back it was the same when i had the previous issues with charging) this time its invisible to iTunes, pc,won't charge anywhere except turned off. i left it plugged into pc where it wasn't visible and then about 40mins later it recognised it. so i did a factory restore and update then reloaded a back up. it now is visible to pc and charges from pc and power adaptor but won't charge from a dock. Strange and Frustrating. Suvzero

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

HT3939 i can't on my iphone 3G. it suddenly off. even phone not charged when i plug to power. kasun

hello.. i can't on my i phone 3G. it 's suddenly off.and now it want to on. even phone not charging when i connected to power. pls hepl me.

You can try a couple of things:
Tap Settings > WiFi > and then the blue ">" next to the network name. Find "Renew Lease" and tap on that.
Tap Settings > Airplane Mode On. Wait a few seconds and turn it back off.

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions?

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions

If you have a PPC iMac, see KB Article: http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Intel iMac, see KB Article: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC)
Your iPod is "new" & still under warranty.
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Or, take your iPod Nano to your local Apple Store or AASP.

How come I get the message (Not Charging) when I am plugged up to power?

How come I get the message (Not Charging) when I am plugged up to power? I keep getting this message, is there a problem? Or is this normal

It had got done to 30% when I plugged it up, it goes in and out - charging and not charging. it is sitting still, but I am creating Movies with iMovie and iDVD

My original Ipod 30gb will not charge when plugged in (suspect battery completely dead...). Help

My orignal 30gb ipod will not charge when plugged in to a power socket. I think the battery has completely run down. Any thoughts?

Which model is this iPod. The "original" iPod was 5GB or 10GB, so this must be a 3rd gen iPod, at the earliest. This document shows all the iPod models.
http://support.apple.com/kb/ht1353
If it's a 3rd gen iPod, it has a dock connector, but it needs to be connected to a FireWire port to charge. It does not charge from a USB port.

My brand new PB will not charge when in standby or when on

I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e. it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

My IPad 2 won't stop saying not charging when plugged in any outlet

My IPad 2 keeps saying not charging when plugged in any outlet

On the off chance try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

MBA battery does not charge when connected. Help!

My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

My macbook pro will not charge when I am using it.

My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

My info for battery charging says "Not Charging" when it is charging as per dashboard widget.

My info for battery charging says "Not Charging" when it is charging as per dashboard widget. Since change to lion all slowed down do I need more ram ( have 2 gig). Lost some icons in web site icons and other random icons. So far SL better.

Yeah, it was purchased in August 2008. I'm not really sure what a charge cycle is, but I do plug it in and unplug it a lot to a power source. Mainly because I keep my computer on most of the time (either on or on sleep). So between taking it to classes and stuff, I'll recharge in between and when it's really low, otherwise I run it off the battery most of the time.
On a sidenote, I have went to that information thing about about the battery after letting it sit plug in for a few hours, and now it has this information:
Battery Information:
Model Information:
Serial Number: DP-ASMB016-38ea-4762
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 61993
Fully charged: No
Charging: No
Full charge capacity (mAh): 61993
Health Information:
Cycle count: 324
Condition: Good
Battery Installed: Yes
Amperage (mA): -1208
Voltage (mV): 12129
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Message was edited by: Akalboy
Oh, forgot to note. Now the time remaining is 10 hours, which is DEFINITELY wrong.

It says not charging when it is plugged into my mac desktop

My Ipad 2 says not charging when it is plugged into my computer and it does not show up on the side bar in the itunes app.

It is possible that the USB port is not working properly as well. This support article might be of help.
http://support.apple.com/kb/ts1591
Sometimes all it takes is a restart - quit iTunes, restart your Mac and restart your iPad and see if that helps at all.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Battery not charging when in sleep mode

This might sound like a dumb question but, is it normal that my shuffle does not charge when computer is in sleep mode? It's been plugged in for the last 6 hours and the amber light is still flashing. Can I change the sleep mode on my computer? surely I don't have to be working at my computer for 4 hours every time I want to charge the shuffle. thanks
G5 Mac OS X (10.4.3)

You can also change your SysPrefs so that the Mac doesn't go into Sleep when you don't want it to .... for example, when you want to charge the iPod. You won't lose much by doing this; it can still be set up to shut down the display and your hard drive.
My own preference these days is to disable automatic sleep completely. If I wind up leaving for a few hours or an afternoon, I don't mind leaving it in the 'near sleep' mode that it goes into and even that happens only when I overlook putting it to sleep manually. You can do that with the remote, with the power button, or of course via the Apple Menu.

I POD not charging when I tunes recognise it

Similar Messages

Maybe you are looking for