I-Pod not recognized by laptop

Dear All,
I use my i-pod as an archive flash disk. I tried to plug it yesterday to different computers, and none have recognized it. I have checked USB ports and all are fine. While not recognized the i-Pod is still charging (using power from lap top) which seems to indicate that cable is fine. What to do? I am really stuck and I desesperatly need some of the data on the pod. Tks for any tips/solutions. F

http://docs.info.apple.com/article.html?artnum=301343

Similar Messages

  • I-Pod not recognized

    Whenever I plug my I-Pod Photo into my laptop with Vista, I get told the USB Device is not recognized. Any ideas on what I can do? As of right now my laptop is the only computer I have at college, and I'd rather not have to wait until I can get my desktop sent.

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    iPod not recognized on a Windows laptop.

  • Ipod touch not recognized by laptop

    My sister brought her ipod touch over because she forgot her password and wanted me to restore it for her. When I plug the ipod into the usb port in my laptop i get a message saying, "USB device not recognized" and that it has malfunctioned. The ipod won't charge or register at all on my laptop but it will on my ps3 so its not a problem with my usb cable. I have installed all of the drivers and updated itunes. When I plug in a mouse and keyboard they both work perfectly fine so I have no idea what the problem could be.

    Device not recognized
    http://support.apple.com/kb/TS1538

  • I-pod not recognized by Computer

    Hello, everyone. I've had my 80G classic for about two years and last week bad things happened. When I plugged in my I-pod it said that this device could work better using USB 2.0. I thought that this was weird but didn't think much of it.( My I-pod had been using USB 2.0 for a few months on this computer) then the next day. It stopped connecting at all and says that this device can not be recognized. I have turned off my PC and tried pulling the power cord out. I've tried reinstalling my drivers. The funny thing is that I can still charge my I-pod with fire-wire and it works normal besides this.

    That sounds like something strange may have happened to your USB drivers, lichu.
    In the course of your troubleshooting to date, have you worked through the following document?
    [iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date|http://support.apple.com/kb/TS1538]

  • IPhone 4s is not recognized by laptop even when it's on recovery modeb

    I Have been having problems with my iPhone 4s lately it doesn't charge either by the plug or the laptop and have used many different laptops but still it doesn't work I have tried to force it to recovery mode but still it says it's not recognized what do I do please help, I'm also using the latest version of iOS

    Hello Sibongile22,
    If your iPhone isn't being recognized in iTunes, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If your iPhone still isn't charging or responding, you may also find these articles useful:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    - Brenden

  • IPod nano is not recognized by laptop

    Hi
    I just bought a new iPod nano. iTunes doesn't recognize it. It says that the harware driver is not installed. The iPod works normally on my mac but not on the acer laptop which is running Windows Vista.
    My previous iPod nano worked normally on the acer laptop.
    Message was edited by: Charlieboy161

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

  • Built-in Webcam not Recognized by Laptop

    My built-in webcam on my Satellite A305-S6905 is not recognized by my laptop!!! 
    I click on Camera Assitant Software to boot up the cam and get no where. 
    The error message reads: Webcam is either disabled or failed. Please check your webcam settings.
    I have no clue where the webcam settings might be. I have downloaded the driver 2x from the Toshiba recommended downloads: Intel Chipset Software Installation Utility for Windows Vista (32/64bit) / XP(v8.7.0.1007; 04-13-201... I get a message that the download was successful. Then, I check the list of devices in the Device Manager. The Chicony USB 2.0 Camera software is nowhere to be found. I cannot select it to Update the software. I have restarted my computer 2x. No help.
    Does anyone have any suggestions?   My daughter is leaving for Hong Kong and Vietman and I would like to track her journey using Skype. Thanks, NC
    page2

    Thank you for the help Jerry, but I already tried that download. After downloading, I recved the following message: “The setup has detected that version (1.07..) of Camera Assistant Software for Toshiba is already installed. This setup installs an earlier version of Cam Asst. Soft for Toshba. You will need to uninstall the previous version (17.193.0508L) before installing this version.”
    I have not tried to find the earlier Cam Asst Soft for Toshba version to uninstall yet. Should I find the earlier version, uninstall and download this earlier version?
    page2

  • HP Simple Save external hard drive not recognized on laptop.

    I have tried plugging it into different USB ports on same laptop or a completely different desktop.  It is never recognized.  last week it was.  I took it apart & tried it in a 3.5 SATA external closure.  Still is not recognized.  I have info on it that i desperately need.  Is there any way for me to get my files off of it?

    cadee
    Welcome to the HP Community Forum.
    I hate to be the bearer of bad news; this vintage drive might have died.
    If you are lucky, it is only the power supply, although this is a thin hope and is not based at all on the facts.
    Depending on your level of desperation, you might consider taking the drive to a forensic specialist.
    My own Simple Save drive died suddenly one day about five months ago after several years of good service.  Fortunately, I never depend on only one device for backups, else they are not backups, but instead become single points of certain failure.
    I hope you find a viable solution. 
    We have other posts here on the forum on the subject; you might do a search and see what others have said.
    I grieve for your loss.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • WRE54G Range extender not recognized on laptop running Vista

    I have just set up a home wireless network using the WRT54GL and the WRE54G range extender. The main computer (WindowsXP) is wired and a desktop (also XP) is getting 100% signal through the WRE54G. A third computer (laptop running on Vista) works fine on wireless running off WRT54GL but is not recognizing the range extender and getting insufficient signal in other parts of the house including the room where the 2nd desktop is getting 100%. The WRE54G is not showing up on the network map of the laptop. Can anyone help me trouble shoot? I need step by step instructions - I don't know a lot of the internet/network lingo but am pretty computer literate. Thanks

    If one computer is already working fine with the wireless range extender .... you need to check the wireless settings on the vista Laptop ....
    Make sure that the adapter is workiong fine ....
    Also try uninstalling & reinstalling the wireless adapter .....

  • IPod not recognized by laptop's USB 1.0 port

    There are a couple of problems here. I have an external hard drive that can only be accessed with a USB 2.0 cable. I had to buy a card with USB 2.0 ports since my laptop only has USB 1.0. When I try to update the iPod (plugged into the USB 2.0 card as well as the external hard drive), everything freezes, goes very slowly, and I can't transfer songs from the external hard drive.
    When I unplug the external hard drive I can update songs from my laptop's hard drive, but the iPod has to be plugged into the USB 2.0 card. When I plug the iPod into the laptop's USB 1.0 port (regardless of whether the external hard drive is connected) the iPod is not recognized, it only gets charged.
    I tried this iPod on a different computer last night and it worked great.
    So two questions: 1) how do I transfer songs from my external hard drive (get my computer not to freeze) and 2) how can I make my laptop recognize my iPod when it's plugged into the laptop's USB 1.0 port?
    Thanks a lot

    Well... from what i am reading about your post, you want to transfer your music from the external hard drive to your laptop. if this is correct then i think that you should open the hard drive into a window and put all the music into 1 folder and drag it onto your desktop, then once the music is downloaded onto your laptop, (if there is enough space) unplug the external hard drive and use the USB 2.0 port 4 your ipod w/o the hard drive. sometimes when i plug my ipod into my PC it will stop everything for 5 minutes then it starts to work. so i recommend to plug it into the 2.0 and wait a while and see what happens.
      Windows XPee  

  • I pod not recognized by Windows XP

    I have an IPOD Touch 2nd generation.  I'm trying to connect it via USB to a WinXP box.  The USB port is enhanced, is operation, but does not detect the IPOD.  Any suggestions?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start by:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Does it charge?
    I suspect that enhanced mean USB 2 port.

  • New nano not recognized by laptop (already followed all suggestions on site

    I have a 3rd generation iPod and it connects to my desktop and is recognized just fine (so that implies no hardware issues). I however do not want to use it with my desktop, I want to use it with my laptop. I have re-installed the USB drivers to no avail. I actually get an error message during driver re-installation that states that the "firmware is mis-identifying the resources" or something to that effect. I believe the error code is 9. I have copied the driver file usbaapl.sys from my desktop to laptop and this did not help either.
    My laptop's USB ports recognize lots of other flash memory devices just fine.
    I am using my desktop to manage the transfer content to the nano right now, as fortunately my music collection is on a portable external drive so I can use either PC to play it regardless of whether I am on the road or not.
    I would like to be able to manage content from my laptop. Do you think I need a firmware update? Any and all ideas for what could be wrong with my laptop's config?
    Chris

    Yes I have downloaded 7.4 and then 7.4.1 but neither has helped. It is really wierd. I have a iPod Classic 80Gb and it connects fine to my laptop. I just can't get my nano to be recognized as well.
    Chris

  • I-pod not recognized by vista or I-tunes

    I am having trouble getting my nano to show up on my computer.
    I have a 3g nano and using vista.
    Here are the facts:
    completed the 5 r's
    Went into disk mode, which says "ok to disconnect" every time I do.
    USB cable and ports are all fine.
    external flash drives and hard drives I have all work with no problems.
    Ipod worked fine and randomly stoped working.
    When I plug i-pod into computer it lights up.
    I-pod chargers and works fine.
    Please help.

    Hi, Im 11 Years Old And I Have A Black iPod Nano 3rd Gen I Got It From My Mom On Chrismas And My Mom Put My iTunes On A Disk On Accedent And I Plugged My iPod In My Compaq Windows Vista Yesterday And i Put The Disk In And iTunes Pops Up, My iPod Is Plugged In. It Shows This Weird White iPod And Its Not Mine So I Eject It Even Tho Its Not Mine And My iPod Screen Says Its "Connected Eject Before Disconnecting" And On The I Tunes I Doesnt Even Show My iPod To Eject So I Cant Eject It I Cant Do Nothing I Love My iPod But i Think Its Broken....Please Help Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless You If You Have The Solution ~Alexis behr

  • Iphone 4 not recognized by laptop

    I just upgraded to an iphone 4 and I can't get it to do anything with my laptop iphone program.  My old phone (3gs) worked fine and I was able to sync, charge and what ever I wanted.  The new phone will make the Laptop give a little boing noise but it will not bring up the iphone program ( I did remove and reinstall the iphone program) nor will it charge the phone nor will the iphone program reconize my new phone when I open the program manually.  This phone will work fine on my desktop.

    No..when you plug your phone in and you hear the "little boing noise" you should get an icon in your system tray. If you click it it will give you the progress of the driver installation. Once it finishes your iPhone should chirp and show you the charging icon. iTunes will not find your phone ubntil this happens. It may be that you aren't giving it enough time to find the driver, download it and install it.
    If the that doesn't happen, follow the article I linked:
    http://support.apple.com/kb/TS1538

  • I pod not recognized by i tunes

    Hello this is in regards with the i pod and i tunes. Recently had to make i pod into enable disk use for data now the options on the i tunes arent there because the computer things its a usb storage device. Now it wont let me change it back to music storage etc in options. Went to restore it the same thing happens. The computer usb hubs are working ok because they find the i pod as a storage device but the same thing happens. Go to restore as i said and ive updated it using the download nothing. Orange and green lights are flashing on it and now its locked me out. Added the new hardware with the driver for the i pod the same thing happens. It says no i pod connected or no i pod detected. This has gone on for so long now i want my i pod back please can someone help me. I tried to install and uninstall i tunes its same things HElp!!!!

    Hi, Im 11 Years Old And I Have A Black iPod Nano 3rd Gen I Got It From My Mom On Chrismas And My Mom Put My iTunes On A Disk On Accedent And I Plugged My iPod In My Compaq Windows Vista Yesterday And i Put The Disk In And iTunes Pops Up, My iPod Is Plugged In. It Shows This Weird White iPod And Its Not Mine So I Eject It Even Tho Its Not Mine And My iPod Screen Says Its "Connected Eject Before Disconnecting" And On The I Tunes I Doesnt Even Show My iPod To Eject So I Cant Eject It I Cant Do Nothing I Love My iPod But i Think Its Broken....Please Help Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless You If You Have The Solution ~Alexis behr

Maybe you are looking for

  • Family Sharing On Mac Not work

    Hi. I've 2 account (A1 and A2) A1 is the organizer account and A2 is a parent account. I've added A2 into A1 family. I can not view any purchased A1 app or book or music in A2 account (A1 uses mac, iphone, ipad / A2 uses mac). Alse A1 can not view an

  • Problem with chinese characters while sending mail with .CSV attachment

    Hi, i am sendin .CSV file as an attachment with mail using "SO_DOCUMENT_SEND_API1" FM, whle opening the mail attachment the chinese characters are not displaying properly. currently i am using ECC 5.0 can any body help in this regard. Thanks, Rahim

  • F-44 Clear vendor Items

    FI experts, I am trying to access F-44 to clear vendor open items, but I get an eror "Doc type AB not define" can someone tellme where in IMG I need to go to fix this issue? thank you for your help

  • I have no photos tab on itunes how do I get photos

    Hello to the helpful people out there I have an itunes account and there is no photos tab how do I get it back or is it an upgrade? thanks

  • Issue in adding up columns.

    Hi: Does anybody know how to do this in Query Designer: I have a Calculated KFig. in a Column and is not bringing me the addition of the partial values in the result row. Is calculating again the formula, and thus delivering a wrong result. How can I