I-Pod not recognized

Whenever I plug my I-Pod Photo into my laptop with Vista, I get told the USB Device is not recognized. Any ideas on what I can do? As of right now my laptop is the only computer I have at college, and I'd rather not have to wait until I can get my desktop sent.

See if any of these articles help.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
iPod not recognized on a Windows laptop.

Similar Messages

  • I-pod not recognized by Computer

    Hello, everyone. I've had my 80G classic for about two years and last week bad things happened. When I plugged in my I-pod it said that this device could work better using USB 2.0. I thought that this was weird but didn't think much of it.( My I-pod had been using USB 2.0 for a few months on this computer) then the next day. It stopped connecting at all and says that this device can not be recognized. I have turned off my PC and tried pulling the power cord out. I've tried reinstalling my drivers. The funny thing is that I can still charge my I-pod with fire-wire and it works normal besides this.

    That sounds like something strange may have happened to your USB drivers, lichu.
    In the course of your troubleshooting to date, have you worked through the following document?
    [iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date|http://support.apple.com/kb/TS1538]

  • I-Pod not recognized by laptop

    Dear All,
    I use my i-pod as an archive flash disk. I tried to plug it yesterday to different computers, and none have recognized it. I have checked USB ports and all are fine. While not recognized the i-Pod is still charging (using power from lap top) which seems to indicate that cable is fine. What to do? I am really stuck and I desesperatly need some of the data on the pod. Tks for any tips/solutions. F

    http://docs.info.apple.com/article.html?artnum=301343

  • I pod not recognized by Windows XP

    I have an IPOD Touch 2nd generation.  I'm trying to connect it via USB to a WinXP box.  The USB port is enhanced, is operation, but does not detect the IPOD.  Any suggestions?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start by:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Does it charge?
    I suspect that enhanced mean USB 2 port.

  • I-pod not recognized by vista or I-tunes

    I am having trouble getting my nano to show up on my computer.
    I have a 3g nano and using vista.
    Here are the facts:
    completed the 5 r's
    Went into disk mode, which says "ok to disconnect" every time I do.
    USB cable and ports are all fine.
    external flash drives and hard drives I have all work with no problems.
    Ipod worked fine and randomly stoped working.
    When I plug i-pod into computer it lights up.
    I-pod chargers and works fine.
    Please help.

    Hi, Im 11 Years Old And I Have A Black iPod Nano 3rd Gen I Got It From My Mom On Chrismas And My Mom Put My iTunes On A Disk On Accedent And I Plugged My iPod In My Compaq Windows Vista Yesterday And i Put The Disk In And iTunes Pops Up, My iPod Is Plugged In. It Shows This Weird White iPod And Its Not Mine So I Eject It Even Tho Its Not Mine And My iPod Screen Says Its "Connected Eject Before Disconnecting" And On The I Tunes I Doesnt Even Show My iPod To Eject So I Cant Eject It I Cant Do Nothing I Love My iPod But i Think Its Broken....Please Help Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless You If You Have The Solution ~Alexis behr

  • I pod not recognized by i tunes

    Hello this is in regards with the i pod and i tunes. Recently had to make i pod into enable disk use for data now the options on the i tunes arent there because the computer things its a usb storage device. Now it wont let me change it back to music storage etc in options. Went to restore it the same thing happens. The computer usb hubs are working ok because they find the i pod as a storage device but the same thing happens. Go to restore as i said and ive updated it using the download nothing. Orange and green lights are flashing on it and now its locked me out. Added the new hardware with the driver for the i pod the same thing happens. It says no i pod connected or no i pod detected. This has gone on for so long now i want my i pod back please can someone help me. I tried to install and uninstall i tunes its same things HElp!!!!

    Hi, Im 11 Years Old And I Have A Black iPod Nano 3rd Gen I Got It From My Mom On Chrismas And My Mom Put My iTunes On A Disk On Accedent And I Plugged My iPod In My Compaq Windows Vista Yesterday And i Put The Disk In And iTunes Pops Up, My iPod Is Plugged In. It Shows This Weird White iPod And Its Not Mine So I Eject It Even Tho Its Not Mine And My iPod Screen Says Its "Connected Eject Before Disconnecting" And On The I Tunes I Doesnt Even Show My iPod To Eject So I Cant Eject It I Cant Do Nothing I Love My iPod But i Think Its Broken....Please Help Me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless You If You Have The Solution ~Alexis behr

  • I-pod not recognized...cannot even restore.

    I ran the i-pod updater to restore the problem but the thing just freezes on instalizing.....i can't even restore my i-pod......some one please help me!!!!!!!!!!!!!

    bump
    I'm having the same problem....kinda.
    I put the ipod(4th gen) into disk mode. Connect it to pc, the hardware icon appears in the system tray. But it doesn't appear as a removable disk in 'my computer'.
    When i run the latest ipod updater (9/23)(Also have tried an older updater, same message) it says 'ipod service error'.
    My ipod has been broke for a while now, when i tried this method at first ipod updater didn't find anything at all...so that's some kind of progress right?
    Am using Windows PC.(case you didn't realise...which you did of course.)
    Aslo, I really can't afford to buy a new one, or get the battery replaced(i think, dunno how much i costs. but its a lot right?)

  • I just bought the latest ipod shuffle to use with another older one. But when I tried to download updates and charge the new shuffle it is nowhere to be found. The new download is not recognized

    I just bought the latest ipod shuffle and want to put my library songs on it. Why when I tried to install the latest version of i-tunes nothing happened. My new pod is connected to my laptop USB 2.0 port but it is nowhere to be found. Why is this new shuffle pod not recognized?

    You downloaded iTunes AND installed it, right?  What you downloaded is the installer, which installs the iTunes app (and other things like drivers) on your computer.  You then have to run the iTunes app.
    If you did that already, make sure the USB docking cable's plug is completely inserted into the shuffle's headphones jack, as shown in this document
    http://support.apple.com/kb/TS3572
    When connected, the shuffle's light should come ON.  That indicates it is getting power.  If it blinks orange (at least initially), that indicates it is connecting for data.
    If you are good so far, in iTunes, the sidebar (along left side of window) may be hidden.  If it is, from the menu bar, under View, select Show Sidebar.  When the shuffle is connected, it should be listed in the sidebar, below DEVICES. Does it appear there?

  • My i pod touch is not recognized by i tunes. i have uninstalled and reinstalled i tunes as advised. the computer (vista) seems to think the i pod is a camera.

    my i pod touch is not recognized by i tunes. i have uninstalled and reinstalled i tunes as requested by i tunes. but still no luck.  my computer recognizes the i pod as a camera.  HELP

    iPod thinks it’s a Camera   Windows
    https://discussions.apple.com/message/10848866

  • I recently changed from windows to i mac my i pod was not recognized by the pc so i reset and deleted my i pod still the mac does not reconize the device

    I was using a Windows pc then bought a new Mac.My i pod is an old model i was using with the windows pc.
    I reset and deleted the content from my i pod.The i pod has come back on with a picture that shows a usb an arrow to i tunes but i tunes is not recognizing my i pod,what can i do now?

    iOS: Device not recognized in iTunes for Mac OS X

  • My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    Hey corky60,
    I'd go ahead and give the following troubleshooting steps a shot:
    1. Try the iPod troubleshooting assistant:
    2. Restart the iPod Service
    3. Restart the Apple Mobile Device Service
    4. Empty your Temp directory and restart
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Change your iPod's drive letter
    7. Remove and reinstall iTunes
    8. Disable conflicting System Services and Startup Items
    9. Update, Reconfigure, Disable, or Remove Security Software
    10. Deleting damaged or incorrect registry keys
    You can read more about each step in detail in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
    Take care,
    David

  • I Tunes not recognizing the I Pod, I Pod is frozen.

    Hi thank you for Holping me with the Error 1417 and 1418,
    Before i can try thos solutions I have A new problum.
    I Tunes is not recognizing the I Pod, and I Pod is frozen on the "Do not disconnect" screen.
    Thanks
    DELL   Windows XP   3.2 Ghz Pentium D With 60GB Ipod Photo

    First of all try Resetting your iPod. Hold down the
    MENU and SELECT (centre) buttons for five or ten
    seconds until you see the Apple logo appear then the
    menu button to go to the normal display. Once you've
    done that, if everything is working again, have a
    look at this troubleshooting article: iPod shows up in Windows but not in iTunes
    You, my friend, are a life saver!!! I had the same problem today and I was freaking out. I was watching a video and went back to the menu and that's when it froze. None of the buttons would do anything. It sat like that with the backlight on for about three hours so the battery is just about drained now. I never knew about the Menu and Select button reset method until now.
    It worked beautifully, thanks!!!!
    Pieces and Parts   Windows XP Pro  

  • HT1567 My computer is not recognizing my iPod NanoPod - therefore the 'Devices' is not showing up on the Left side in order to sync Playlists to my Nano Pod?  What can I do about this please?

    Hi
    My computer is not recognizing my iPod NanoPod - and as a result 'The Devices' section is not showing up in order to sync new Playlists to my Nano-Pod.  Any suggestions?
    Thank you.

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • TS1410 I pod Classic not recognized? What can I do?

    I pod is not recognized.  What can I do?

    missanoshka,
    if you select the MacOSXUpdCombo10.7.5.dmg file which you’d downloaded, and press ⌘i to Get Info on it, what information is shown for it under ▼ General: Size? My initial guess is that you could have an incomplete download of that file.

  • Accessory not recognized by I Pod Touch

    up till 2 days ago My I pod touch and both I pads recognized my JVC car stereo USB after plugging in but all of a sudden I get a " This Accessory not recognized by this I Pod/I Pad " My older I Pod Touch worked well that is until after checking I updated it in I Tunes, Very large Mistake as not it does not see the JVC either.
    Like I said all this was working fine until 2 days ago and now nothing. I have reset all the I devices as well as the JVC stereo

    Are you saying that the car system worked with the new devices before updating the iOS and then stopped after updating the iOS?
    If so then
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Hpwever. sometimes an iOS update breaks compatibility. Have you checked for a firmware update to the car system?

Maybe you are looking for

  • Deletion of Scheduling Agreement and Delivery Schedule using BAPI

    Hi SAP MM Gurus, Please assist in inquiry below: My scenario is that I am trying to delete delivery schedules and scheduling lines using BAPIs. I have no issues when there is no GR made yet for the delivery schedules. The error arises when there are

  • My ctrl button doesn't work with many other keys

    Hello: I am unable to use the ctrl+t (open new tab), ctrl+c or ctrl+v (copy/paste) among other ctrl commands while using firefox. I know that the ctrl key itself is not broken as I am able to use the ctrl+backspace and ctrl+forward (return to last pa

  • Delivery confirmation after real delivery

    Hi SAP gurus, Can you please tell me is there any simple and standard way to trace if the shippment is delivered or not? After the delivery we would like to write back to the SAP the date and time of the shippment. Is it posible to enter somewere in

  • Is it possible to show the shell in linux from exec

    my app needs something to be installed on the client pc. It downloads the file and then install its automatically. For win this is working, fir the linux not, i can set the permissions, and when i try to launch it like String[] commands = {"/bin/sh",

  • Timeline Start and Finish Dates - how to not display finish dates for tasks not added to timeline

    I have a project, Project 1, with start date 1 Jan 2014 and finish date 31 Dec 2014.  When I switch to timeline view, the timeline spans this period. I now want to create a second view for a sub project within Project 1, called Project 1A.  It starts