I pod touch 4 will no longer play through speakers on sony icf-cs15ip dock. any resolutions?

Solved!
Go to Solution.

Hi Robin,
Welcome to Sony Community!
Make sure that iPod is securely docked into connector. Update software of iPod to latest version. Reset both the Docking Station and iPod.
On the Docking station:
Unplug the power cord.
Wait approximately 10 seconds.
Plug the power cord back into the AC power outlet.
On the iPod player or iPhone device:
1. Hold down both the Home and the Lock button at the same time.
2. Wait approximately 10 seconds until the power on the unit turns off.
3. Turn the power back on by holding down either the Home or the Lock button.
After reset, turn ON the Docking System and set the iPod on Dock connector and playback music.
Note: If the version of Operating System in iPod is updated to iOs 6, it might not be compatible with the Docking Station.
If my post answers your question, please mark it as "Accepted solution".
Thank you for your post.

Similar Messages

My Sony icf-cs15ip docking station won't play music ,

My Sony ICF-CS15iP docking station won't play music from my iPhone 4s which is on iOS 7 but it will play my music from my old iPod touch, can anyone help me with a fix or let me know if I'll just have to get a new docking station, thanks in advance!

@Gscott1979, I had the same problem with both my ICF-CS15iP docking stations I have and was ready to throw them out the window.
Finally after almost 2 years using them just as a charging station I found the solution that worked for me.
And the solution could not be any simpler........ use the reset button on the bottom of the docking station. It is a small hole between the battery latch and the screw next to it. Just a paperclip will do.
If it does not work, you may also want to check this site
http://community.sony.com/t5/Other-Products/Sony-Dream-Machine-ICF-CS15iP-does-n ot-play-music-from-iPhone-4/td-p/104557
Good luck

Internet Audio will no longer Play Through USB Output to hi-fi Amplifier & Speakers

My audio output jack on my Mac G4 is broken. I have been taking audio out of the computer by USB into a device that converts the audio so it can be used with a traditional amplifier and speakers. This presently, still works fine for audio or audio/video sources that are stored on my hard drive. Yesterday, I was looking at a youtube video embedded on a non-youtube site. Both audio and video were working fine.Then the audio stopped working. I went to the youtube site and no audio worked there either. I have tried myspace and other sources with audio/video, but no longer will audio from the internet, play on the USB system. Any player on the hard drive will produce audio through the USB port to the amplifier system. If I switch the Mac OS X.4.11 system preferences to select the internal speakers for the output destination, I can get audio from the internet again. Then everything from the internet or the computer plays through the internal speakers. I have Safari and Firefox Browsers. I need to be able to play music from the internet through the USB port to my amplifier and speakers. One suggestion I researched was to trash the Macromedia preferences and then restart the browser. I tried that to no avail. Hopefully, somebody out there knows what happened and can tell me how to fix it.

Hi BD,
Thanks for saving me. And thanks for responding so quickly. Your answer was there when I got up. For me 48 hours was a long time to go without that function.
I had seen one reference to the audio midi setup app and had looked at it but somehow only saw the midi devices dialog box which I had dealt with in the past. After your post I went back to it and I immediately discovered that there is also an audio devices dialog box.
From the drop-down menu I selected 44100.0 hz int the format field on the output (right) side of the dialog box.
Also the Default Ouput and the System Output fields had built-in audio selected instead of iMic USB audio system. I used the drop-down menus to switch them back.
So watching the youtube video imbedded on a non-youtube site must have changed those settings.
Any idea why that would have happened?
Now, I'm wondering if the little iMic USB audio system which converts the digital signal to analog line level out is actually a little midi device? Well, maybe not since there is no midi plug involved. I have seen that setting (44.0 Khz) relating to CDs I think. I'm guessing that 44.0 Khz and 44100.0 hz are very close to being exactly the same thing.
So does 44.0 Khz = line level (analog audio)?
Anyway, BD, Thanks again for solving my problem and doing it so quickly. What a relief!
Have a great 4th of July holiday weekend,
Skip

I have a 2nd gen ipod touch. Recently I updated the OS from original second gen to the latest available which is software 4.2.1. Since doing this the ipod will no longer play music, videos, or stream online content. Any ideas how to fix it please?

I have tried restoring factory settings and loading the preferences I saved before updating the OS.
Neither of these methods have any effect.
The ipod also seemingly prevents you from restarting the ipod using the earlier OS software when resorting from recovery mode.
Any other ideas?
Cheers
Dan

- Downgrading the iOS is not supported by Apple.
- When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem and an appointment a the Genius Bar of an Apple store is in order.

HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

I think a few have.
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

My iPod touch charges but no longer plays music thru docks on a Phillips an onkyo theater systems, both work fine with friends iPhone?

My iPod touch charges but no longer plays thru my Onkyo or Phillips home theater systems. Works fine with friends iPhone and both systems worked fully with this iPod in the past.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Adobe Premiere Pro CC will no longer play program after weeks of editing it

Adobe Premiere Pro CC will not longer play my program when hitting the play arrow. The first time I hit it will play. But if I stop and then hit play again it just basically hangs up. I've been editing this program for several weeks in Windows 8.1 with over 1TB of free disk space. It would occasionally not play but if I restarted the program it would go again and I continued on. However, now it has the problem on this program all the time.      Basically I'm not able to put the finishing touches on my program and have not been able to use Adobe Premier Pro for several weeks now.   I'm basically paying a 1 year subscription for a program that is not working correctly. WHAT IS ADOBE DOING TO FIX THIS PROBLEM?   I see that there are countless people having this issue on the web, so I figure ADOBE is aware of this problem.    IS THERE A NEW RELEASE TO COVER IT? IF NOT WHEN WILL THERE BE A RELEASE TO ADDRESS THIS ISSUE?
If I start a new program it seems to work ok... but I probably have over 100 hours into the current program... starting over from scratch would not be good.. and what guarantee would there be that the problem would not occur again after another 100 hours was invested into it?

Thanks for the suggestion, I will give that a try.   It didn't work to go back a few weeks on the first try. As I get a chance I will try more saves that are further back.
Adobe Premiere Pro is working for me for the new music video project I'm working on today.
It's just this other program is large. 1/2 hour length.   If I push play it will work the first time. Then after I stop, and move the cursor to another spot, as long as I wait 2 or 3 minutes for it churn away and update the monitor, then it will play again.    As long as I wait 2 or 3 minutes each time it won't crash.   If I don't wait and start pushing multiple play and stop requests it will crash.   My machine has 12G of memory and 1Tb free disk space, and runs at burst speeds above 4GHz.
Several weeks ago I also had this problem.   I deleted all the render files and rebuilt them, and after that it worked for quite a while. This time I've tried that twice and it didn't help.
Maybe it has something to do with the order in which I render the sequences?    I might try that again, and experiment with the order of rendering.
There are 7 or

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

Video will no longer play, cannot add video content either.

Since this afternoon, iTunes video will no longer play. Not movies, not TV shows. I checked and music and podcasts still play. I thought it might be a conflict between purchased video vs video I added from my DVDs, but no such luck. Purchased content will not play. Nor can I add any new video, whereas I added a new TV show episode this morning.
If I go into the iTunes LIbrary file and select a video and choose "Play with Quicktime" the video plays just fine. But if I select "Play with iTunes" nothing happens. At all. Not even an error code. It's like I didn't select anything. If I try to add content by the keystroke "command O" and choose the file … again, nothing. No error. Just no response at all. When I open that file on my computer, select "Play with Quicktime", then choose "Share with iTunes" inside Quicktime I do finally get an error. "This file cannot be shared (error 206)". I looked up this error code and found this: "The filename or extension is too long." This does not make sense. The file names are fine and the extensions are exactly what I always use to add content to iTunes.
So it's like the entire video portion of iTunes has ceased to function. Any clues?
iTunes 10.4.1
OS 10.6.3

There are a g-zillion posts sharing your problem... but still no answer from Apple. The odd thing is that it is not affecting all of us.
I share your problem and it's doing my head in... if somebody mentions the 5 bloody R's again...!!!
Before updating to 1.2, ask yourself... how bad do you you really want Tetris????

Lots of my music will no longer play after latest update

Hello,
I have a lot of music that will no longer play in my iTunes after the last update. it doesnt happen with all my music, but a lot of it, and as far as i can tell, movies and tv shows are still good. when i click on the song, it just skips forward over a lot of songs that it cant play until it gets to the next one that it can play. to make things stranger, i synced my iPad to my iTunes, and the ones that cant play in my iTunes will play on my iPad. when i try to open the song using QuickTime player, i get the following error: error -2002 a bad public movie atom was found in the movie
what is a bad movie atom and why am i getting the error when trying to play an audio file, and why wont they play in my iTunes but will on my iPad.
System: Win7 Ultimate 64bit AMD A10 8GB RAM
iTunes : 11.4.0.18
QuickTime : 7.7.5
any ideas?
thanks

The contacts is saved on Google or Backup Assistance (Whichever you are using) and you can use ES File Explorer like I posted at http://community.vzw.com/t5/Android-Apps/Simple-way-to-Backup-apps-for-Hard-Reset/td-p/658707 , so you really wont loose anything but apps data...
BUT, I am not saying that you do this if that is your only issue... I was just pointing out that this is a good ideal to do with any Major Updates..
If the contacts isnt linked again you should get the option to link them again once the OS boots, normally it checks and then prompt to link again..

About 1/3 of my 4100 tunes will no longer play. Please help!

Over the past year I have spent countless hours painstakingly adding appropriate track information, cover art etc. I like the tracks to be attached to the original album, not a best of. I also have a lot of extended versions, remixes etc which then have to be attached to the specific 12" or cd-maxi single etc and a lot of hard to find - hard to attach stuff. Needless to say - I don't want to do it again.
Anyway - I just noticed that a large quantity of tunes (looks like about 1/3 of the library) will no longer play. Double click on them and nothing happens. No cover art - it's as if the song is not there. A look at the "get info" shows the track in the right place with everything pointing to where it should be ... but no play. To add insult to injury, I can't get them back by double clicking on the track itself in Explorer. It still will not play. And these songs are not corrupt. I have been playing them for some time now without issue. How can I save my library and information and get these tracks to play again.
Side note: this has happened before, usually after an iTunes update and typically with only a few tracks, never this widespread.
Please help!

I have made it a standard practice to keep a copy of all music files - tracks under the Album -- at a separate folder location.
Do you have such a back up location of your music tracks? If you do, I'd suggest to try this:
Delete all tracks, that are NOT playing, belonging to one Album in iTunes. Then locate the folder in your backup location where this Album's tracks are located, and ADD this folder to iTunes. Then check to see if these play OK.
If they do, then repeat the process for all the rest.

Help please: iTunes will no longer play downloaded songs

ITunes will no longer play songs that I've downloaded from the iTunes Music Store. It used to play them, but now it won't play them at all. It will play only songs in the library from my CDs. I only have these downloaded songs on one computer, the same as I've always had. I can see the files in the folder My Music/[artist]/[album]. I have QuickTime 6.5.2 and iTunes 4. I don't know of anything that's changed on my computer since the songs were working.
1) Is the problem that it's an old version of iTunes?
2) If I switch to a newer version, will I lose all my downloaded songs?
3) If the version of iTunes isn't the problem, any ideas about what could be wrong?
Please help! I've only had iTunes for a few months and have barely been able to use it. (I can't understand why it would become so outdated so quickly.) Thanks in advance!

Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
There are two things to try before you upgrade:
Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
http://docs.info.apple.com/article.html?artnum=302478

ITunes will no longer play nor add to the library any mp3 files which I have created by conversion from a wav file.

I am running iTunes 10 on XP Pro and it will no longer play those mp3 files which I have created by conversion from wav files. I tried to delete some from the library and then re-add them but iTunes will not add them back to the library.
Can anyone help solve this, please?

Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
There are two things to try before you upgrade:
Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
http://docs.info.apple.com/article.html?artnum=302478

ITunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

iTunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

You get this message because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
Do any of these aply to you?

I pod touch 4 will no longer play through speakers on sony icf-cs15ip dock. any resolutions?

Similar Messages

Maybe you are looking for