I-pod Touch Cable

I got question guys.Today I found an Ipod on the sidewalk (Lucky me)I noticed taht i t still works but the battery is low.Is there any USB Cable that can help me transfer music,Videos,Photos...Etc .I saw one the BestBuy website.Its brand is Griffin.....Should I purchase it?
(P.S.) It's a 32gb
Solved!
Go to Solution.

Xxking wrote:
I got question guys.Today I found an Ipod on the sidewalk (Lucky me)I noticed taht i t still works but the battery is low.Is there any USB Cable that can help me transfer music,Videos,Photos...Etc .I saw one the BestBuy website.Its brand is Griffin.....Should I purchase it?
(P.S.) It's a 32gb
Lucky you indeed. Check a certain well known auction site for "ipod usb cable". You can get a generic one for about $2 shipped from the US. They work fine.
Nokia wrote:
Any iPod USB cable will work. But more importantly, why don't you bring it to the police so they can put it in the lost and found? Then, after a set period of time, you'll legally own it.
haha Good one.

Similar Messages

Fire wire cable for I-pod Touch

Hi all,
Just a quick question, my cat decided to rip my I-pod touch usb connection cable apart today, so I went & got a new 1 which had the connection that goes into the I-pod it-self, 1 x usb connection and 1 x firewire 400 connection (its an apple product), So I thought great firewire will transfer data across quicker than usb, got home plugged in the I-pod via firewire and I-tunes would not see my Ip-pod but it does when you use the usb bit.
Does an I-pod touch not support a firewire connection ? any help would be great.

In a word, no.
Nor the Gen 5 or any iPod since. Speed really was not much different on those that did support it though so not a huge loss, and you should still be able to charge via FW, my Gen 5 charges while you get a little message telling you FW doesn't work. Never tried on my Touch.
No message telling you this?

I-Pod Touch Problem Switching On - I-Tunes, USB Cable and Arrow on Screen

Hi folks.
When I switched on my i-pod touch this morning, an image appeared with a usb cable and an arrow pointing to the i-tunes logo. I have tried to switch off and restart the i-pod touch (16GB) but I cannot get past this stage. Do I need to have access to i-tunes on my computer to bypass this? I am at work and don't have access currently....
I've had it for just approximately 14 months.
Please advise....
Many thanks,
D6.

It sounds like the ipod is in recovery mode. Plug it into you computer when you get home.
If it doesn't fix the problem, then take it to another computer running itunes and plug it in. It should tell you that an ipod has been detected in recovery mode and do you want to restore it. It should ask to download and install the software. After the install, plug it back into your computer and it should restore your apps and music.
This has happened to me with every update ever since the 3.0 software has come out.
Strangely enough, it didn't do it with ios 4 which should have told me that I was in for problems!!!!!!

TS1567 5th Gen I-Pod Touch not Syncing, does come up on PC.

My 5th Gen I-Pod Touch no longer connects to I-Tunes, or Microsoft Sync (In my 2013 Ford Focus) through a sync cable. My computer however, does see the I-pod as a external device, and it does charge through the Sync cable.
I have reset the I-Pod fully, and it still would not connect. I checked and the I-Pod and the version of I-Tunes is the newest version of each.
I-Pod: 7.1.1 (11D201)
I-Tunes 11.1.5.5
I ran the I-Tunes Diagnostics for the Device Connectivity test, and Device Sync test both, and received the following.
Device Connectivity Tests
Supprt services:
iPod support service is running. (Green Dot)
iTunes Helper is running. (Green Dot)
Apple Mobile Device is running. (Green Dot)
Ports:
USB ports verified. (Green Dot)
No FireWire (IEEE 1334) ports found (Green Dot)
No iPod, iPhone, or iPad found. (Red Dot)
One or more test failed.
For more information, click Help next to each test.
On the Sync test it just told me no device found, (Same red dot item above) I clicked next and got this:
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Compaq 6200 Pro SFF PC
iTunes 11.1.5.5
QuickTime 7.7.5
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0027B8C00DF84210
Current user is an administrator.
The current local date and time is 2014-04-26 18:20:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD Radeon HD 6450
Advanced Micro Devices, Inc., AMD FirePro 2270 (ATI FireGL)
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Renesas Electronics USB 3.0 Host Controller. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (5th generation) running firmware version 7.1
Serial Number: CCQKN0C7F4K5
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
I have tried two Sync cables in both my car and Itunes, with the same results.
Any help would be appreciated.

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

HT1349 Hi. How do you reset your i pod touch password after you forgot it

Hi. I have forgotten my password for my i pod touch and was wondering how to unlock it.

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost.

My i pod touch wont restore

Hi I was updating my i pod touch through i tunes it wouldnt do it so the computer decided to restore the i pod but then an error message came up so now it wont restore i just have a picture of the usb lead showing me to plug into i tunes but the same problem comes up so i cant use my i pod now i wish i never tried to update it can someone please help.....regards Terry

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection
http://support.apple.com/kb/TS3694#error1604

HT1414 I keep trying to restore my i pod touch and am getting nowhere I have checked usb port

Hi i am trying to update my i pod touch but it had error 1602 I followed all the instructions given but now it is stuck in recovery mode.... any suggestions?!

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Did you try on another computer and cable like the troubleshooting said to try last?

My I-Pod Touch 3Gen 32GB has internet connection when plugged into my PC, but loses it when I unplug it.

When I have my 32GB I-Pod touch ( 3rd Generation ) plugged into my PC, the internet works fine. When I unplug it, it says I'm still connected, but can't load anything. What's going on?

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

I just want know if is possible use the iphone's charge battery for the i-pod touch. Thank you!

i just want know if is possible use the iphone's charge battery for the i-pod touch. Thank you!

Using an iPhone wall charger for the iPod is fine. You can also use an iPhone cable for the iPod.
The term " iphone's charge battery" is not really clear.

I pod touch 5th generation was working fine died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue if it on and the apple logo is about to appear but it never does nor does anyother picture. If i hold the

I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to use lock pattern for ur home screen in pod touch 4g(ios 5)

how to use lock pattern for ur home screen in pod touch 4g(ios 5)

Video formats:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Support for 1024 by 768 pixels with Apple VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)

My i pod touch was fully discharged and now will not charge

my i pod touch was fully discharged and now will not charge at all. what can i do

Try the not charging topic of:
iPod touch: Hardware troubleshooting
Also try another cable, another charging source. Further look at the dock connector in the iPod. Look for abnormalities like foreign material, bend or corroded contacts, broken or cracked plastic.

Pin locked i pod touch 3rd gen

Help i have pin locked my i pod touch 3rd gen, i have tried putting it in recovery mode and doing a restore, it starts ok, but half way through it stops and comes up with a screen that says i tunes could not connect to i pod because it is locked with a passcode and needs to be unlocked first. i have tried 3 times and do not want to try again. does anyone now a way of unlocking it.

yes i get the screen with the usb cable on it and it says its needs restoring before i can use, it then asks me about updating to ios 5 and then it starts downloading software, even when the error screen comes up it is still downloading ios 5 software. i dont want to keep trying incase i do any damage.

I pod touch will not start or reset

I have an I pod touch which will not start at all. I have tried 2 different chargers and to no avail. The screen does nothing at all.........just black.
I cannot reset it as the red band does not appear.
As far as I know, the battery is probably discharged, although I have tried to charge it up in an attempt to get it to turn on.
I would appreciate any help as I am reluctant to just throw away a piece of kit that is barely 2 years old!
Thanks all.
Clive

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201210 cant restore i pod touch with a 2001 error code

cant restore i pod touch with a 2001 error code

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
http://support.apple.com/kb/TS3694#error2009

I-pod Touch Cable

Similar Messages

Maybe you are looking for