I Pod Touch game Dark Galaxy Freezes when launching application.  Previously worked.

Recently purchased game Dark Galaxy for I Pod touch, has been played for several days.  Now when launching application will freeze up and unable to completely lauch.

Try here:
iOS: Troubleshooting applications purchased from the App Store

Similar Messages

  • Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out

    Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out of the usb port

    Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694
    Next I would try placing the iPod in recovery mode and then try restoring the iPod. Note that this will erase the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My Satellite L675-S7016 freezes when I don't work with it 5-10 minutes

    My Satellite L675-S7016 freezes when I don't work with it 5-10 minutes and only if plugged with power cable, on battery power no problem with freezing.
    I switch off sleep options in power manager on all power profiles, but problem still here.
    Who ever met the same problem? How to solve?

    od, what computer do you have? Does it ever "unfreeze" or do you have to power it down? When does it freeze?
    - Peter

  • My bank card will no longer link to my billing information when it has previously worked; I'd like to know why this is happening and how to resolve it

    My bank card will no longer link to my billing information when it has previously worked; I'd like to know why this is happening and how to resolve it

    Do you mean that it's being declined, that you are getting an error message, ... ?
    If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
    If it is a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Screen turns dark and freezes, when refreshing deletes written txt

    Firefox should be more compatible without blaming others.
    While writing this same note, or an email or text, suddenly the screen turns dark and freezes, impeding to edit or recover the work. When clicking Control Shift R , screen/server refreshes and work lost.
    Kindly assist and solve this issue. I uninstall and reinstall with no avail, problem persists.

    It's disturbing that you get ads just starting up the browser. Where did you download Firefox from? Unfortunately there are some unauthorized modified versions promoted in search engine results...
    Some things to check:
    # Home page -- [[Startup, home page and download settings]]
    # Extensions (more detail below)
    # Malware -- [[Troubleshoot Firefox issues caused by malware]]
    # Program shortcut (more detail below)
    '''''Extensions'''''
    Add-ons, and particularly extensions, can override your settings in Firefox's normal dialogs. Use the Add-ons page to review and disable or remove ALL nonessential or unrecognized extensions. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above a disabled extension to restart Firefox. You can complete your work on the add-ons page and click the link as the last step.
    '''''Program Shortcut'''''
    Not sure exactly how you do this on Windows 8.1, but on earlier versions:
    right-click the shortcut you use to start Firefox > Properties > Shortcut tab
    Check the "Target" line and make sure there is no URL at the end. By default, the target ends with
    firefox.exe"
    with no URL after it.

  • On iPhone 4, the screen goes dark and freezes when I start Safari

    All of a sudden, today I can't access the internet via Safari on my Verizon iPhone 4. If I click on a link in an email or start Safari, the screen goes dark and freezes. What's up with this and what the fix?

    Hi
    Try holding sleep/wake + power button for 10 seconds, until you see the Apple Logo.
    See how that goes.
    Taylor

  • I-Pod Touch 8GB Will not Run User-Installed Applications

    Now, this isn't really a question as I have solved it myself but I am simply curious as to the cause (and probably to help others who may have had the same issue as I didn't see this type of question floating around already)
    I got an I-Pod Touch Brand-new from the box two days ago, was running perfectly fine with the few applications I had installed on it. Just today I ran "PDF Viewer Lite" from the App Store, did as it should but however a couple of minutes later any other applications (including PDF Viewer Lite) would not run. I confirmed they were running in the background -- applications like ICQ or AIM were still displaying notifications to messages but would not display themselves when clicked as they would simply show their main screen for less than a second and boot me back to the main menu. Hard resets did not work (HOME button at bottom + power button on top being held), and even a restoration from backup had failed. Before I restored the I-Pod to its factory settings, I reinstalled the offending program, PDF Viewer Lite and automagically, it, along with everything else, decided to work as they should.
    So my real question is, what could have caused it? I've used PDF Viewer Lite just yesterday and it didn't lock up all of my applications on my I-Pod. I'd like to know what caused it so I can avoid it in the future -- as I'm not always connected to a WiFi network to reinstall that application.

    The same thing happened to my daughter on her Mac the other day. It turned out that the program she'd downloaded wasn't compatible with her OS. Did you make sure you'd downloaded a version that is compatible with Tiger?

  • I just updated me i pod touch to 5.1 and bow it is not working what do i do its not concecting to itunes

    okay so i just updated my i pod touch to 5.1 and it is saying to concect to i tunes and  i plugged it back into my computer and it isnt workin what do i do???

    Have you tried plugging it into your computer running iTunes? If so, what happens?
    It's in recovery mode and needs to be restored.

  • Our converted eCourses often freeze when launched from our new 3rd party hosted LMS...

    We have recently purchased a new externally hosted LMS system (Silkroad's GreenLight) and we have a 3rd party taking our older authorware courses (which are working) and updating/converting them using Adobe Captivate 5.5.  Once these are done and uploaded into the LMS system, users are finding sporadic freezing at launch of the converted courses.  In some cases we are using a Riverbed solution to compress content so that network performance is not an issue.  With the various components involved in this situation. we are having a hard time troubleshooting and narrowing down the problem as it is so inconsistent.  I noticed a blog http://helpx.adobe.com/captivate/kb/projects-published-captivate-5-lms.html suggesting a fix and we tried this with one user it worked with another it did not.  Our environment consist of XP (and some Win7), Adobe Flash Player 10+, and IE8 or 9.  Can anyone tell us what the proposed template fix described in the blog is actually doing?  Or if you've experienced this problem and have another fix we could try?  Any help is appreciated....Getting desperate.  Thanks!

    I believe the patches offered in that post were to address an issue that sometimes occurs with Resume Data bookmarking in certain LMSs. 
    If you are currently using Resume Data bookmarking, try disabling it by checking the box in LMS Customisation dialog to Never Send Resume Data.  If that resolves your issue, you at least know what is causing it.
    In cases where there are a large number of variables, the only way to diagnose the issue may be to remove as many variables as possible first. Then when you finally get to a stable version that does not misbehave, you then re-introduce the other components to find the one/s that re-introduce the issue.
    So, in your case, you may need to look at how your developers are 'converting' the authorware content in Captivate.  Make sure they recreate everything using Captivate components, and insert the images via the approved menus etc.  I'd also temporarily avoid using this Riverbed compression solution until you have established the cause of your issue.  It may be interferring with something.

  • I3 freezes when launching ncmpcpp from dmenu

    It works great when I launch ncmpcpp from within a terminal (urxvt or xterm). But the whole system freezes when trying to launch it from dmenu. I'm forced to hit the power button on my desktop.
    When I power back on and inspect the i3 log file, there's nothing past the call to dmenu_run:
    08/13/2010 06:20:55 PM - Urgency flag changed to 0
    08/13/2010 06:21:01 PM - --- parsing command "exec /usr/bin/urxvt" ---
    08/13/2010 06:21:01 PM - starting "/usr/bin/urxvt"
    08/13/2010 06:21:02 PM - Managing window 0x00800007
    08/13/2010 06:21:02 PM - _NET_WM_NAME changed to "Terminal"
    08/13/2010 06:21:02 PM - WM_CLASS changed to urxvt (instance), URxvt (class)
    08/13/2010 06:21:02 PM - WM_CLASS changed to urxvt (instance), URxvt (class)
    08/13/2010 06:21:02 PM - _NET_WM_NAME changed to "Terminal"
    08/13/2010 06:21:12 PM - --- parsing command "exec /usr/bin/dmenu_run" ---
    08/13/2010 06:21:12 PM - starting "/usr/bin/dmenu_run"
    //... log ends here
    When I try and use dmenu, this time from openbox, ncmpcpp launches flawlessly.
    Let me know if you require more information
    Last edited by marfig (2010-08-13 19:05:21)

    marfig wrote:It's the freeze that bothers me though.
    IIRC, it will do that in any window manager when you try to run a[n] [N]CURSES program without a terminal.
    marfig wrote:[...] could you please at least have inserted a comment on AUR explaining the program?
    AUR description wrote:A simple Dmenu-based application launcher. Launches binaries and XDG shortcuts.
    AUR descriptions can only be so long and any comments there were wiped out by that database incident.  Sorry 'bout that.
    Anyway, it is a small shell script that uses Dmenu to launch applications either by binary name or XDG shortcut name (e.g., "writer" for OpenOffice Writer instead of $(soffice -writer)), and it can be told to launch applications in a terminal instead, which I figured would help you out.
    Last edited by Wintervenom (2010-08-14 02:39:57)

  • A strange box opens when launching application. It causes Firefox to freeze in place

    When launching the most recent version of Firefox a strange box appears at the top that effectively keeps me from using the browser. Also, I can't seem to add an image to this request.

    Add it in the Reply box.

  • NIPALU.dll entry point error message when launching application

    A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
    "The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
    This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
    Attachments:
    Error Message Screen Shot.png ‏8 KB

    MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
    Hello,
    It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
    Microsoft® SQL Server® 2012 SP2 Feature Pack  =>
    ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Error running SendMail when launch application from JNI

    Hello,
    I am getting the following exception when I try to send email using JavaMail. This error began happening when we upgraded to Java 1.6. It does not happen with earlier versions of Java.
    javax.mail.SendFailedException: Sending failed;
    nested exception is:
         javax.mail.MessagingException: IOException while sending message;
    nested exception is:
         javax.activation.UnsupportedDataTypeException: no object DCH for MIME type multipart/mixed; boundary="----=_Part_0_2882193.1230049431911"
    I have browsed through the forums and read the many postings with a similar error. I have tried the variety of suggestions, but nothing seems to work. My understanding is the JAF is included in Java 1.6, so we should not need the activation.jar in our classpath anymore. Even so I have tried with and without the activation.jar in the classpath. I do not think it is a class loader issue because we do not build any of this into our application. It is all referenced in jar files on the classpath.
    The interesting thing is that I can launch the application with a normal JVM launch and it works just fine. The error only occurs when I launch the application from a C++ application using JNI. In both cases I am using the exact same classpath. The error occurs whether I include activation.jar in the classpath or not.
    I have tried to programmatically add the MIME types using the MailCommandMap class, but this had no effect.
    The most recent test I ran was to put the activation.jar and mail.jar files in my C:\Java\jre6\lib\endorsed directory. This actually cleared up the error. This is not a viable solution for us, but it leads me to believe the .mailcap file is not being loaded correctly for some reason. I just cannot figure out what the issue could be as it seems to be associated with JNI.
    Thank you for any help,
    Mary Kathryn

    Because JAF is now part of the JDK, the JAF classes are loaded by the system class loader
    instead of the application class loader. If the thread's context class loader is not set, JAF
    uses its class loader to load the mailcap files. Since JavaMail's mailcap file is in mail.jar,
    and mail.jar is still loaded by the application class loader, the system class loader can't
    find JavaMail's mailcap file.
    Normally, when starting the application using the "java" command, the thread's context
    class loader will be set to the application's class loader. This may not be happening
    automatically when starting the application with JNI.

  • How to display asia language title when launch application?

    jnlp is ：
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp
    spec="1.0+"
    codebase="<%= codebase %>">
    <information>
    <title>&#24212;&#29992;&#31243;&#24207;</title> //this is asia lanauage title
    <vendor></vendor>
    <description></description>
    </information>
    when launch app&#65292;the title showed as &#9633;&#9633;&#9633;&#9633;&#9633;&#65292; does i must convert asia language to unicode&#65311;

    your jnlp file starts with:
    <?xml version="1.0" encoding="utf-8"?>
    but is this title in utf-8 encoding ?
    /Dietz

  • [Solved] Always Use Wrapper When Launching Application

    Hello all,
    I've write a very simple wrapper for an application (mpv), and would like to always use my wrapper instead of the application.
    As far as terminal goes, I did it by using an alias stored in the ~/.bashrc file (alias mpv='/usr/local/sbin/mpv_launch').
    However, I'm not sure how to achieve the same when launching mpv from not within the terminal (Dolphin, in my case), in such case the .desktop file is used, which obviously calls mpv itself and not my wrapper.
    Is there a way to globally convince the system to always run my wrapper whenever mpv is called, no matter how?
    Thanks, Adam.
    Last edited by adam777 (2013-05-31 13:46:12)

    And one more option: which application gets run depends on the order of your PATH variable. I have "/home/drcouzelis/Library/bin" as the first path in my PATH variable. If I put an "mpv" Bash script in there, then the Bash script will run instead of the installed application.
    # An example Bash script to start mpv fullscreen
    /usr/bin/mpv -fs "$@"
    ...of course, if you make a Bash script called "mpv" that calls "mpv", make sure it calls "/usr/bin/mpv" and not itself!

Maybe you are looking for