I pod will not charge. Battery Failure??

Ok, I have seen this posted before and I have read through all of the suggestions, but none of them have worked so far. Any help would be great.
The computer recognizes the Ipod, when plugged into the usb its glows solid yellow like it is charging. A few hours ago the light turned green... fully charged right? But when I unplugged it, the battery light did not come on. And the pod did nothing. Ok.. maybe it wasn't fully charged. I plugged it back in and now it is still charging again like it had not been charging at all. I have charged USB ports to see if this would help, but could this just be a broken battery situation. At one point it was working, then it just seemed to have died. I have had problems from the start with this thing. Suggestions?

Maybe it's the cable itself that is faulty. Have you tried it with a new USB cable?
You can also read "Battery Does Not Charge" article:
http://docs.info.apple.com/article.html?artnum=60941

Similar Messages

  • Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

    This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
    I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
    - First Series of Issues: "Phone Offline", will not charge battery -
    In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
    1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
    2) Reset the phone (several different ways - call tech support so that you do this correctly)
    The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
    - Second Series of Issues: Error message "an error has occured that cannot be resolved" -
    Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
    Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
    Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
    - Third Series of Issues: phone stuck on USB symbol -
    So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
    In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
    palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
     After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
    I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
    Thanks.
    Post relates to: Pre p100eww (Sprint)
    This question was solved.
    View Solution.

    Hello and welcome to the forums;
    Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
    There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
    Hope this helps,
    TreoAide

  • Since my I upgraded to ios7 my iPhone 4 will not charge, battery completely dead.  Any ideas

    Since my I upgraded to ios7 my iPhone 4 will not charge, battery completely dead.  Any ideas

    I updated my iphone 4 to ios7 three days ago. It now will only charge if connected to a computer USB port, either Mac or windows. It no longer charges on any wall mounted USB cable, like it did before the upgrade. The wall mounted cables still work just fine with an iPhone 4S and a new iPad retina display but not at all with the iPhone 4. Took it to a genius at apple store and they checked the battery. It still charges to 80% of original. They were clueless and suggested I replace the unit.  It seemed to be related to ios7

  • My i-pod will not charge

    Hi - My i-pod seems to have died and will not charge - any clues - thanks

    Have you worked through all the troubleshooting here?
    iPod's battery doesn't charge
    This article might come in handy as well.
    iPod won't turn on
    Keep in mind that a completely discharged battery can take up to 30 minutes of charging before it shows any signs of life and even after that a hard reset is still sometimes necessary to get the iPod to boot up. 
    B-rock

  • HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

    Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
    When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
    Anyone else have this issue after they upgraded the iOS system?
    Thanks,

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • T43 1875-D6U will not charge battery or power on.

    I have a T43 1875-D6U that has a power issue.
    I replaced the A/C input jack and purchased a new genuine battery but the system will not charge the battery. I have tested, with a multimeter, the wall outlet, the a/c power adapter, the power jack connection opening and the connection to the board, and i have tested the battery terminals at the board --- everything checks out as getting power.
    When i received the new battery, there was 5% battery life because the OS booted and i could see the battery indicator on the SYS tray but system would still not charge the battery. Now the battery is dead and I am back to "square one".
    I have disassembled this laptop 5 times now trying to troubleshoot this issue.
    PLEASE ADVISE!
    [email protected]
    Sean Doran
    [email protected]

    Hi, I am having the same problem. But as yet no-one seems able to provide a solution. Have you made any more progress with this?

  • Power book will not charge, battery just replaced.

    Recently the power adapter or the power connector on my computer would easily disconnect from each other.
    This morning I noticed that it was not charging at all, played around with it trying to jiggle it into place yet it does not have any connection.
    Before I go and spend $100 on a new charger,or $200 on a service bill, is there a way to tell if it is the adapter or the connector on the powerbook.
    I noticed on the cylindrical plug that the silver tube has seperated and was wondering if that would have to be sealed in order to maintain a ground.
    I know it is not the battery as I was able to get one on warranty, through apple care, and it charged full last night, which it is showing 4 hours left.
    Thanks
    -jim

    is there a way to tell if it is the adapter or the connector on the powerbook.
    The easiest thing to do is go to an Apple store where they will have a working power adapter, or if you have a friend with one, use it. It sounds like the female socket itself may be shot, which would require replacing the DC-in card, which is around a $75+ part, plus labor to install.

  • T410 Will not charge battery!

    I have a T410 which does not charge the battery. I have installed the latest BIOS and Power Management software without any thing changing. I noticed that even with a fully charged battery if unplugged from the AC adapter it will die instantly as though the battery is dead! Could this be the system board? I'm not sure what else to try in diagnosing this issue.

    lead_org wrote:
    it could be an issue with the battery. Call service support and they should direct you on what to do.
    Well it appears it's not the battery or the software because I had another new still in the box T410, Type 2522-22U of which I used to interchange batteries and power adapter with. One last thing I tried was  switching hard drives with the factory fresh image on it and I found that O/S to behave the same way in this laptop. Still reports the battery at the same charge and not charging. Looks like its the system board. Apparently there is a circuit on it that regulates the charging process. That same battery in the NIB laptop charges just fine!

  • My new T410 will not charge battery! Bizarre

    Hello, Today I recieved a T410 laptop I purchased from ebay. (perhaps a mistake)
    The laptop appears to work fine while plugged into ac, however the battery will not take a charge. Lenovo power manager says the batter is at 15% capacity and "charging", however this never increases and the laptop dies instantly when the power cable is removed. It does not turn on without ac power. When it is plugged in and closed, the battery charging LED is illuminated, however it blinks (i'm not sure if it is supposed to do this?). It is solid orange for 4 second and then one quick blink.
    I have updated the bios, completely removed the power manager software and driver and reinstalled it. This has not helped my issue.
    One concern I have is that I purchaed this laptop refurbished from the states. I am located in canada. I hope I am eligible for warranty service.

    Sounds like the battery is defective. You should be able to get it replaced if the laptop is still within the first year of warranty. Whether or not Lenovo will acknowledge your request depends on where the warranty applies.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • My iPhone 4s will not charge battery

    my iphone 4s left 5% battery last time i use it but somehow dead and I try charge bettry but not charge at all

    I cant understand! :((
    Can you explain more.…?

  • Year Old 4G 20GB simply will not charge - battery issue already?

    I've had a 4G ipod for a year now which charged with both the USB cord to my laptop and the firewire cord to the AC adapter until yesterday.
    Once before I ran the battery low enough that it wouldn't mount on the computer and I got the battery with exclamation point icon.However it did take a charge from the AC adapter. This time the icon showed for a second and then completely died. I have not been able to get the ipod to mount or charge on the laptop (or another computer's USB port) or been able to charge from the AC adapter.
    I followed Apple's troubleshooting (including waiting over 30 minutes for the ipod to recognize the charge from the AC adapter, but it refuses to turn on at all, and I can't get it to reset. I use the Ipod a lot, but not nearly enough to go through the estimated 300-500 charge cycles to deplete the battery.
    Any thoughts?

    Try hooking it up to the AC adapter and leave it to charge overnight. If it is still unresponsive the next morning, I'd start looking around for a Apple service tech.
    Doc

  • I pod will not charge

    the i pod works when plugged into the car but when i disconect it the screen gets blurry then shuts off and when i plug it into the computer it says please wait very low battery but nothing happens can this be fixed

    Hi rjmarks87,
    Have you tried resetting your iPod? To reset an iPod:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (be sure to leave it on the white side of the switch, which is the Off position).
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds, until you see the Apple logo appear on your iPod's screen.
    You might need to attempt this step several times. For more effect, try connecting your iPod to a power source, like your computer's USB port, or a wall charger, while you reset the iPod.
    If that doesn't seem to be helping, then try letting your iPod's battery fully drain down (after the "Low Battery" screen, when the screen finally goes blank afterward).
    Then, when it's basically dead on battery, let it recharge through a power source (something like a wall charger would be preferrable, if possible) for at least 4 hours.
    Any success after trying either of those things?
    -Kylene

  • SL510 will not charge battery

    I had a battery that wasn't charging, and assumed the problem was with the battery. But I bought a new one, and it won't charge either. So now I think the problem is with my SL510. Power Manager says the battery is in good condition, and sees that it's at 12%, but it just doesn't charge it. I installed the latest version of Power Manager, and that made no difference. I tried to update battery firmware but it said it was up to date (even though the version is listed as all zeros). Any ideas?

    hi ubiquity,
    thank you for your post and welcome to the community. We had a very similar issue previous pertainng to the battery issue you had faced. You may want to try these steps.
    Disconnect AC
    Shutdown
    Remove battery
    Connect AC
    Startup
    Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).
    Shutdown
    Disconnect AC
    Insert battery
    Connect AC
    Startup
    Hope this helps out. Do let me knkow how it goes.
    Regards

  • Shuffle will not charge

    My I pod will not charge. I have tried using the computer and the wall plug in. the only light I get is a red one when I turn it on. When I put it onto the charger I get no lights.

    If it's less than a year old take it to an Apple Store (only a MAX ride away...) for analysis and possible replacement.
    Is the "wall plug in" an Apple USB Power Adapter or some other brand?
    Are your PC USB ports "high-power"? Shuffle requires 5v/500mA...

  • TS1382 My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible on the screen.  The cord works fine to charge my I-Pad.

    My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible.  The cord works when charging my I-Pad.  Any ideas?

    Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
    Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
    Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

Maybe you are looking for

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible. Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search

  • FRM-92101 Blob in Record Type

    Hi! I have a package in db with a record type and a procedure: type timage is record ( name varchar2(255), format varchar2(4), dpi number, content blob procedure get_image(my_image_var out timage) is begin select tblob into my_image_var.content from

  • OSB 11g - SB transport using Soap1.2

    Hi all I am trying to build a proxy service after converting a wsdl from soap1.1 to soap1.2. Problem: The proxy service was working fine with 4 operations, SB transport and soap1.1 , however as soon as I moved it to Soap1.2 the OperationalBranch is n

  • ALV USING FM(FIELDCATALOG_MERGE)

    What is the purpose of fm "REUSE_ALV_FIELDCATALOG_MERGE" explain briefly with sample code.

  • W540 und CUDA v6.x

    Hallo Community! mein W540 20BG0042GE mit K2100M läuft auf Windows 7 x64. Wenn ich in die NVIDIA-Systemsteuerung schaue habe ich laut Systeminformationen nur NVCUDA.dll 8.17.13.1269 mit Produktname CUDA 5.0.1. Für die gpu-Funktionalitäten von Matlab