I pod wont restore through itunes

Hi, had probs with my i pod classic 180gb. Start up in itunes it says "ipod preparing for recovery" then " itunes detected an ipod in recovery mode needs to restore", so i do that but it comes up saying itunes could not restore " an unknown error has occurred -1439-1415 etc". Now its stuck in disk mode. Tried reloading windows drivers- updates, reloading itunes, the five r's.
Also got this info
retracts-3
reallocs-308
pending sector-0
power on hours-87
start/stop-92
temp current-29c
temp min-8c
temp max-54c
Im at my wits end trying to fix this, any help would be appreciated.Thanks in advance.

If you are talking about the screen-lock passcode, thate means that the restore never successfully completed.
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Similar Messages

  • My 2nd gen ipod wont restore through itunes. Help?

    I have been given a 2nd gen ipod and it wont reset and restore itself. It keeps saying connect to itunes and it wont update and the ipod has a password on it but it wont let me put it in. When itunes is trying to recover it and it keeps failing and having a error message. Please help!!!

    First try deleting and then re dowloading itunes completely. Go from there. if this doesnt work contact a Apple tect to call you to walk you step by step through the resteting prosess. Here is the link https://expresslane.apple.com/GetproductgroupList.action

  • My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring it showes your ipod is restore but still apple logo won't go

    My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes  showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?

    i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated

  • My ipod touch 5 generation 16gb wont restore on itunes and sometimes it says that an error has accord (4013)

    my ipod touch 5 generation 16gb wont restore on itunes and sometimes it says that an error has accord (4013)

    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

    How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

    Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
    The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

  • Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please

    Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please it's driving me mad and Ive lost my phone

    What is the exact message you're getting?

  • I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. What should I do?

    I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!

    http://support.apple.com/kb/ht1212

  • Iphone stuck in recovery with itunes logo. wont restore in itunes either. what to do?

    yesterday my iPhone was on the carrier mode 'searching...' and wouldn't find connection, taken sim out put back in. done everything. went to EE store and got told to reset iPhone so that's what I did, from my iPhone. from then it frozen on the restore screen and wouldn't restore. I looked on-line and did recovery mode and now its stuck in recovery and wont restore on iTunes. How do reset and update my phone? HELP

    Had the same thing happen to my iphone 6 that I just purchased 3 weeks ago. I did the latest upgrade to the software ,phone worked fine for the day but later that night it crashed,went to a black screen and would not do anything. I put it into dfu recovery mode to restore which is where it got worse. Phone was locked with the "connect to iTunes screen " and when I tried to restore several times kept getting error code 4003 and 4013. End result was a trip to the genius bar at the Apple Store where it was determined to be most likely some sort of hardware failure so they replaced my phone with what looked like a refurb but so far so good with the new one. Knock on wood. I still believe there are issues with this latest update because although my phone is working it's not running as smooth as it did the first few weeks I had it. I am very disappointed with the ongoing issues with the iPhone's. I've had every model phone from back to the i3 and never had as many issues combined with this latest iPhone 6. Here hoping Apple gets it together or this will be my last ios device!!

  • IPad 3 bricked after IOS update, will not restore through iTunes

    Hi,
    I have an iPad 3 wifi/3g model that bricked after an IOS update 7.0.6. The update failed at about 70% (Apple Logo with progress line on screen) and rebooted into recovery mode. I've tried doing a restore through iTunes mulitple times and even looked at jailbreaking it but no luck. It always fails during the update and I have tried muliple computers (Windows and Mac) Different networks (Home/Work) but the issue is still there.
    The device won't go into DFU mode and in itunes it shows the serial number as n/a like the iPad has no software on it at all. I've tried everything I can thing of and I've had plenty of experiences recoverying and restoring IOS devices in the past. Tinyumberlla and other utils won't get it out of recovery mode and now iTunes won't even try to load the firmware back on the device, it just fails after extracting software.
    I'm thinking its now a hardware issue, does anyone have another solution to try?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT1212 ipod touch disabled due to too many tries on password.  tried to restore through itunes but says I need newer version for software.  now what?

    ipod touch disabled after too many tries with password.  tried to restore through itunes but says we need latest version of software.  now what?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Hi, my iphone 5 will not restore through iTunes.  Error codes 2001 and 2006 appear.  Please help.

    Hi,
    My iPhone5 will not restore through iTunes.  Error code 2001 appears and once I received error code 2006.  Please help?

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • TS3694 I forgot my passcode, then I decided to restore through Itune but it says iphone 3 could not be restored error 1015 occurred. what should I do?

    I forgot my passcode, then I decided to restore through Itune but it says iphone 3 could not be restored error 1015 occurred. what should I do?  

    Was the computer used to jailbreak a different iOS device? Are you trying to forcibly install a version of iOS other than the current version for your device? (4.2.1 for the 3G, 6.0.1 for the 4 and 4S, 6.0.2 for the 5).
    Those are the only other reasons you would get that error other than an extremely rare hardware failure.

  • HT4528 my month and a half old iphone 5s had a blue screen and now just has a black screen. will not reboot or restore through itunes. what do i do?

    my  iphone 5s has been showing a blue screen and shuttiing down. yesterday night it did just that and now will not reboot or even restore through itunes.
    what should i do?

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    i have the same problem...my ipod is 4th generation?uggghhhhh

Maybe you are looking for

  • How to get the values of managed metadata columnn through object model

    Hi, I need to read the values from a managed metadata column, which is set to display entire path. Eg. My value looks like Critical:Important:Interesting:Routine:Not Evaluated without hardcoding these values, can i find which level of child has been

  • Moving average price in Semifinished material.

    Dear All,       Our client wants to go for moving average price in case of semifinished material, which is supposed to be normally standard price. The problem is the MAP is not getting updated after the GR against the production order. What settings

  • Warehouse in Enterprise Manager

    I exported metadata from Warehouse Builder 10g to OLAP 9i. In Enterprise Manager-->warehouse, I can find dimensions but not the cube. Why? Is Warehouse Builder 10g compliant with Oracle 9i? Thanks in advance for any answer.

  • Need away a while need some help

    what is the difference between the 865 and 875 chipsets?  i've looked all over the place and there is no definate answer my PC is used primarily for games if that helps  :D

  • Safari 5.1.1 on Lion 10.7.2 freezing when trying to add bookmark

    After quite painless update to Lion 10.7.2 and moving MobileMe to iCloud I have started normally use Safari, but quickly found that Safari 5.1.1 freezes every time I try to add bookmark. Anyone experiences the same issue?