I powered up my macbook and there is a file folder with question mark on the screen flashing. What does that mean?
Powered up Mac book and screen showing file folder with question mark flashing?
A flashing question mark appears when you start your Mac
Hope that solves your issue.
Similar Messages
-
I just purchased something and it tells me to contact iTunes support to complete the purchase? What does that mean? Please help.
It means exactly what it says.
You need to contact itunes support to complete your purchase. -
MacBook turns on but doesn't go to home screen, instead a folder icon with a question mark on it keeps flashing.
It means that your mac is unable to boot, try doing a safe boot http://support.apple.com/kb/ht1455 first, if that does not work insert your OSX disc (the one that came with your mac) and boot to that, post back with a report.
Is your backup 'bootable' (Carbon Copy or SuperDuper) or non-'bootable' (Time Machine)
Message was edited by: Csound1 -
Restarted and received a blinking file folder with question mark image.
I left my computer sitting while I was working on homework long enough for the screen saver to come on (I'm not sure exactly how long it was). Earlier in the day, I had to force quit safari and then later it unexpectedly quit several times. While my computer was sitting, it looked like it does when it restarts. I waited until it started to come back up, and instead of coming up to the desktop, it came up with a blinking file folder and question mark. I had not done anything unusual with it, and had not tried to restore it. My dad was working on trying to fix it, and inserted the OS X disk. When the options came up, in the repair feature, the disk could not locate my harddrive. I was wondering if anyone else had encountered this problem, and if so how it was resolved. If anyone had any tips or ideas of things I could try that would be great. I can't really get it to an apple store soon, and I'm a student so my computer is very important to me. Thanks.
Mornin' John,
I also have an OWC external firewire drive that I tried to install OSX Tiger to but was told that I could not install OSX Tiger on the external drive.
What Format is that Drive? GUID/MacOS Extended? It should work if the right format.
Is there any way to run Disk Warrior from the external hard drive ... to try and rectify this issue, or at least get my data off the dead drive (if it is so)?
From the external only if you can get OSX installed.
What version is it? Do you mot have the CD?
or from my PowerBook G4
Possibly, with the MaBook in FW Target Mode
http://docs.info.apple.com/article.html?artnum=58583
If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to). -
Suddenly, my macbook pro has experienced problems. When I turn on my computer, the white screen displays a flashing file folder icon with a quesrion mark in the middle. Has my hard drive burnt out? Thank you in advance for any helpful suggestions..
It means your computer is search for a start up volume. You need to reboot into recovery mode and attempt to repair your disk. To do this restart the computer and hold the keys:
<command> + r
Then open Disk utility.
http://support.apple.com/kb/ts1417 -
MacBook Pro flashes file folder with question mark and startup manager will not run
My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
What does it mean when I start my computer and there is a file folder with a question mark?
What does it mean if I start my computer and there is a file folder with a question mark blinking?
That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/ -
Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!
Startup – Question Mark
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3) -
My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222 -
How do I back up the music and apps etc. I restored my computer and I reinstalled iTunes, I was told something about a terminal command line, what does that mean? Please help
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer any other music by using a third-party program like one of those discussed here:
Copy music
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup. The restore will also update the iOS.
Note that the backup that iTunes makes does not include synced media like apps and music
Are you sure you have a 3G iPod? A 1G iPod can only go to iOS 3.1.3
See:
Identifying iPod models -
Just got the 4S. I cannot get Siri to work. It says it cannot retrieve info from the server. What does that mean and how can I fix it to use it?
Siri always contacts her own server at apple. They may be performing maintenance or applying updates, should be back soon.
-
When I try to send photos or anymail, it fails saying...."rejected by the server."
What does that mean and how do I fix it?Please see this article on setting up an email account using the shaw mail server.
https://community.shaw.ca/docs/DOC-2181
Good luck Friend. -
Have macbook mid 2009, with leopard, updated to yosemite, while erasing partition erased hd, dot have backups, powerup shows folder with question mark, inserting grey dvd shows apple and spinning wheel, please help
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can upgrade to Yosemite by re-downloading it from the Purchases page in the App Store. -
2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.
Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My MacBook si not booting displaying a folder with question mark
The very latest development in My Macbook that is not booting, it now displays a gray screen with blinking folder and a question mark inside then it turns off after few minutes.
It is not responding to any option+C,S,V, shift and I cannot boot from the install CD or diskwarrior.
Any thoughts??
Thanks,
ATIf DW can't see the hard drive then it does not bode well for the drive. Try booting from the CD and run Disk Utilities from the CD to see if the drive shows up there. I am not optimistic though since usually DW stands a better chance at this than DU.
If neither DU nor DW work, try using an application such as [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1]. Both have free trial versions that let you see if the software will help before you decide to buy. In this regard you can use them as an analytical tool to see if they can see the drive.
There is also this free tool which supposedly runs on OSX and does recovery of popular media and Office files. [http://www.cgsecurity.org/wiki/TestDisk_Download] I have only done a bit of reading about this tool so I really know almost nothing about it - maybe it only works on Intel processor computers.
Maybe you are looking for
-
Does the Altec Lansing IM500 work with the 2G Nano?
I can't work out from the Altec Lansing website or Apple Store (or Google) whether the IM500 will work with a 2G Nano. Does anyone here know? Thanks in advance, Mike
-
What privileges for the DB account used by client connect to server?
Hello, After I installed the SBO server packages, I found that it must set DB account in the client side. I had tried 'sa' account, it works. but I thought we should not leave the super account in each client side. So I want to know what privileges s
-
Error while running PB40 - initial data entry action
Hi Friends, I am running PB40 initial data entry action. The values that I am giving in the Personnel Officer field are not getting accepted. Its giving me error : *Entry does not exist in T526 (check entry)* I have checked T526 table in SE16 and its
-
My ASUS computer screen is messed up
I need help! My laptop screen has green, black and yellow lines on the lower right corner that seems to be "traveling" horizontally and vertically. I need to get it fixed but don't know what to do. I bought the laptop from Best Buy 1/7/12. Any idea
-
Help! Crashing JVM while doing SELECT statement through JDBC-ODBC bridge
Hi everyone, Help please. I am working on a project on my own computer using the jdk version 1.5.0_04. The project involves running a select on a Microsoft Access 2003 database via the JDBC-ODBC bridge. The database is registered in the ODBC database