I prefer not to have a password to me e-mail. Is this possible?.

Setting up voice mail for 1st time. Would prefer not to have password to retrieve messages. New to the I phone. 1st day of service.
Thanks.

Thanks. this solved my problem.
DL

Similar Messages

I did set up the password when I got the phone and iPad months ago but never turned it on. Now it is asking for the passwords for both my iPhones and iPad and I cannot select not the have the passwords active. ???

I did set up the password when I got the phone and iPad months ago but never turned it on. Now it is asking for the passwords for both my iPhones and iPad and I cannot select not the have the passwords active.

If you do not want to use passcodes, why don't you just go to Settings > General > Passcode Lock and delete the passcode and set the lock to OFF. That will eliminate the problems all together.

I recently updated my iPhone and now find there are a number of songs that I cannot sync to my phone. Some are songs purchased from iTunes. Is there anyway to remedy this? I'd really prefer not to have to repurchase music. Thanks

I recently ran an updatedafter being prompted multiple times. Now I find there are a number of songs that I cannot sync to my iPhone. Some are songs purchased from iTunes. Is there anyway to remedy this? I'd really prefer not to have to repurchase music.

Why would you repurchase songs simply because they will not sync? Sorry, that's beyond illogical, it's simply not smart.
What happens when trying to sync these songs?
Any errors?

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

This is possible to be connected to WiFi but not internet.
You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
Then make sure that your modem/router is connected to the internet.
You can try any other device, lights on the modem/router or use Eth cable to test.
Report back your findings.

Just updated my 3GS and now it will not recognize my voicemail password. How do I fix this?

I just updated my 3GS with the new iTunes update and now my phone does not recognize my voicemail password. How do I fix this?

Enter the correct password or contact the carrier to reset the password.

How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums? Is this possible?

How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums? Is this possible?
That is about the best way I can phrase my question.
I put year/month/date at the beginning of a show, hoping for them to sort by date and I get mixed results.
Would creating a Folder within the Artists' existing folder that said "Pearl Jam Live", inside the "Pearl Jam" folder in iTunes Media help this "Date Sorting Issue"?
Thank you.

Or is there a way to go through aperture to make a new reference library that I can move the masters into later?
you do not move the masters into a references library - you turn your current library into a referenced library. As Terence Devlin said:
File -> Relocate Masters
What you should set up:
Select a folder, where you want to store your referenced files - probably on an external drive.
Decide on a hierarchical folder structure inside this folder - that is completely up to you.
Select a project from your library and use the command "File -> Relocate Masters/Originals" to move the original image files to the folder where you want to go them to. Only take care not to send two projects to the same folder.
Alternatively, if you do not care about the folder structure Aperture will use, select all images at once from the "Photos" view and let Aperture decide how to assing the folders - in the "Relocate Originals" dialoge you can specify a subfolder format.
Regards
Léonie

"The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
Would someone explain this to me?
Thanks for your help!

The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

I just bought the Canon S120 and want to have the camera flash no matter what - it this possible?

I just bought the Canon S120 and want to have the camera flash no matter what - it this possible?

Ok - got it - set to P mode for Program with the top dial, then slecet flashand then you can select flash

I just bought a new iMAC. I want to change the password, but the system is not accepting any old passwords. How do I reset this, so that I can set a password?

I just bought a new iMAC. I want to set a password. But, the system seems to think I already have one set, and I don't know what it is. How do I reset this feature, so that I can set a password, without knowing the current password?

Have you yet, during setting up the new iMac, transferred old data and settings from an external hard drive or another computer? If so, then your computer obtained its current set Password from that tranfer, so you would have to determine what that Password was in the old system. If you have Not transferred any information that way, then the installation and/or setup seem to have corrupted somehow since it hasn't yet received a new system Password selection from you.
At this point, if you can, you can reboot while holding down the Command - R keys to boot into the Mountain Lion Recovery Partition. There you can select to "Reinstall Mountain Lion from the Internet". This will overwrite your current installation and any problems that have occured and give you a fresh install that hopefullywill allow you to set up without problems.

Me and my husband share an apple id, messages are coming through on my phone that I have not sent and my husband is denying sending. Is this possible?

Me and my husband share the same Apple ID
I logged onto my Mac book and the messages popped up, it shows all messages sent from my phone and my husbands.
There are some random conversations in there that I didn't send and my husband is denying.
How do I (a) see what phone sent these, and (b) is this possible to not be either of us?

You cannot see what phone/device sent the iMessages, unless you look at that particular device and they have not been deleted from the device.
Anyone with access to the Apple ID & Password can send iMessages on that Apple ID from an iMessage capable device.

Anyone else prefer not to have XSKey dongle thing

I don't know why this bothered me so much today but here it is hehehe..
Why does logic need a dongle?
1. on a powerbook (and new macbook) it takes up half the available usb ports
2. it sticks out too much - i forsee port damage
3. why not use the computer's serial number to authorise (on 2 machines eg laptop and main comp). you could then update your license to swap to newer computers as you upgrade. If this has hidden issues that i cant think of then maybe internal xskeys on new machines?
If you agree or have any other comments please reply. if there are enough responses this could turn into a petition to apple.
Powerbook 1.67 Mac OS X (10.4.4)

Do you realise that there is STILL no working cracked version of Logic on the OS X platform? There were dongle cracks for OS 9 and PC version cracks came out hours after updates.
This is nearly 5 years. FIVE YEARS. It has eluded hackers, saved revenue that (hopefully) is put back into Logic, protected both your, mine and Apples investment and continues to provide protection from people who do not realise that stealing software does not promote healthy support and development from the companys making the software.
Adobe has elaborate activation based on autorisation that is linked to the MAC address of the machine it is running on. I use this in a proffessional capacity and it is superb. There are working cracks for this and have been for quite some time. Same with virtually all other software. Logic on OS X is the only pro app I know of that has no cracked version available and it is all down to the XSkey.
I agree, it takes up a port and there are precious few. I also agree it sticks out. You are correct in everything you say. But it also protects my investment. The only hidden issues I can see with your serial number idea is that it will be cracked in a week. I have no idea what they have done but hackers just cannot intercept and return a valid signal when using the XSkey and by using the XSkey I can fly to New York, take my key and instal and use any version of logic up to 7.1.1 on any computer in any studio.
There are benefits and drawbacks of course, but for sheer brute force security it is really unequalled in any other app.
Lets have more comments......... It's good to talk.

I'd like to use Fox Tab exclusively and not have the tab bar at all. Is this possible?

This isn't so much a problem as a request for information. Like the topic says, I want Firefox to not show the tab bar at all, but still retain the tab function so that I can open tabs and view them with Fox Tab.

Fox Tab wasn't what I had the problem with, I was simply trying to provide background information that could possibly help someone answer me. fortunately, it worked. indirectly. edmeister, your tip led me to Fox Tab's options, where I found a check box next to "Hide tab bar."

My AppStore stays forever loading when I try to download or update an app, not even ask my password confirmation. How to fix this?

This blue circle just keep spinning forever!

Hi Junioures,
Welcome to the Support Communities!
As a first step, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Also, sign out of your iTunes Store account and sign back in:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
This article provides additional troubleshooting steps for connecting to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy

I'm trying to password a Finder folder. Is this possible?

iMac running 10.8.2. I'd like to password just a couple of folders but I'm having trouble finding a way. Thoughts?

Protecting Small bits of Data...
http://macmost.com/password-protecting-small-bits-of-data.html

Several people have signed into gmail and yahoo mail on this computer and now their ID's come up - how do I get rid of these id's

When I go to sign in to either gmail or yahoo mail and click the n mouse the list of user names of people who have logged on comes up. How do I clear this list so only my user name comes up.

See:
* http://kb.mozillazine.org/Deleting_autocomplete_entries

I prefer not to have a password to me e-mail. Is this possible?.

Similar Messages

Maybe you are looking for