I pressed power key while i pressing option key and my makbook sounded bad what did happened?

i pressed power key while i pressing option key and my makbook sounded bad what did happened?

Chipmunk International BV | Home | Aanbiedingen | Produkt Overzicht
If you don't have an account but would like to open one click here.
1301...
Model introduced: 2009
Serial number: W89380AH9GU (cleaned up from 'W89380ah9gu')
Production year: 2009
Production week: 38 (September)
Production number: 357 (within this week)
Model Number: MB881
Group1: MacBook
Group2: nothing
Generation:
Machine Model: MacBook5,2
CPU speed: 2.13GHz
Family name: A1181
Screen size: 13 inch
Screen resolution: 1280x800 pixels
Colour: White
Memory - flavour: DDR2-S-800
Memory - number of slots: 2
Memory - maximum total: 6GB
Memory - largest module: 4GB
Toebehoren en uitbreidingen bestellen:     Art#     Prijs
2GB SO-DIMM geheugen Mac 200pin DDR2 800MHz     A-3571      € 29,00 ex BTW
Power Adapter 85W voor MacBook (16,6v)     A-4020      € 18,00 ex BTW
Factory: W8 (Shanghai China)
External link: Repair guide by iFixit
Uitbreidingen: Uitbreidingsmogelijkheden van dit apparaat
Please enter any (extra) information you have on this model in the box below. (Type of Mac, CPU speed):
If you like this service and it has been of use to you then please donate us a dollar (just one will do). All donations no matter how small are greatly appreciated!

Similar Messages

  • Ipad Does NOT turn ON even when pressing power/home buttons, plugging through the charger and usb through itunes

    Hi, my iPad suddenly froze while downloading a free kid's game, the loudness/soft symbol just kept on appearing no button works even the slide off/cancel. Then it suddenly turned off. I searched for troubleshooting guide, I tried pressing power/home buttons as instructed, charged/uncharged, and connected through usb using itunes but to no avail. What have gone wrong? I bought this in Vietnam but am here in the Philippines and still under warranty. Could I bring this unit to a service center of apple here in the Philippines?

    Did you hold the home/power buttons for ten to fifteen seconds until the apple appears?
    If still bad, try a restore from within iTunes.
    If still bad, take it to an apple vendor for them to test/reinitialize for you.

  • Boot while holding the OPTION key doesn't work.

    This is really dumb.  I was thinking today my passwords were too weak, so I set out to put Keychains to use.  First thing I did was reset my login password - but then changed my mind and reset it again.  Didn't write any of this down and now I can't correctly type in an admin password. 
    SO I searched and found how to boot into the "Recovery Partition" by restarting while holding the OPTION key.  This worked!  I used the resetpassword in Terminal - and successfully reset the ROOT administrator password.  I figured that was me.  And my advisor (article I found on-line) didn't mention NOT to.
    I still need to reset my admin user password, but now when I try to do the Recovery Partition trick my display remains blank.  I can tell it's powered up, but no progress bar or apple logo...  One further clue is that if I give up and let go of the OPTION key (because nothing at all is happening) five minutes pass (not 20 seconds or so like the time it worked) and the computer starts up as usual.  No "OS X Utilities" window, just the everyday wallpaper and file folders.
    So that's my situation.  Many thanks in advance.
    I should mention, I'm using a mac Pro and the latest version of Yosemite.  And a hardwired keyboard and mouse...

    Is the key(s) stuck, or sticky or not very responsive?
    try another keyboard, any usb keyboard for windows or another mac should work.
    try flipping your keyboard over and letting it bang on the desktop, your r key could be gunked up and the contact might have failed. Depending on the model keyboard liquid or food or something else could be trapped, the older bondi-plastic ones do this more than the aluminum-plastic ones but the key could need a good smacking,.

  • My imac won't start even while holding the options key

    Can some one direct me to something to do.  My iMac, about 3 years old using the latest operating system won't bot up.  Initially I was geting the ?. but after tryint to restart while holding the "option" key, it just went to a bleank. but lit screen.

    It sounds like your HD or main logic board has failed. Try running Apple Hardware Test in Extended Mode. If no errors are reported on the first pass run it 2-3x to be sure. Running in Extended Mode is the most thorough however it is time consuming, don't be surprised if each pass takes 40-60 minutes. 

  • What keys can duplicate the "option", "command", and "escape" keys

    Am having to use an 
    ONN  external keyboard and would like to know what keys can duplicate the "Option", "Command" and  "Escape" functions.... Thank you

    krisserz,
    Actually, yes, a lot of things are similar on MACs, but for example, on this page: http://www.bugge.com/Family-and-friends/Illy/illy.html it says to find the folder Adobe Illustrator [X] Settings and there is none on my computer.
    The Move the folder hint says:
    Up to version 10, the name of the folder is Adobe Illustrator [X],
    From version CS on, the name of the folder is Adobe Illustrator [X] Settings.
    [X] is the version number; up to 10, it is just a number, and above that the Creative Suite version number, CS, CS2, CS3, CS4, and so on, is used (the corresponding standalone versions still have simple numbers, CS is called 11, CS2 is called 12, CS3 is called 13, and CS4 is called 14, but the version numbers with CS are used in the folder name).
    So in your case it would be Adobe Illustrator CS3 Settings.
    It may be worth going through all the Other options and try whichever may be relevant (Entorurage is mentioned under 7, along with quite a few others).
    One of the less nice options is to reinstall, in which case the Clean Script should be used. http://www.adobe.com/support/contact/cs3clean.html

  • I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

    I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

    This is the ipod touch forum

  • The Power button is loose and makes a sound. What to do? you can change it under warranty?

    iPhone 5s. The Power button is loose and makes a sound. What to do? you can change it under warranty?

    Hello juliaROSTOV,
    Thank you for using Apple Support Communities. 
    If your power button is loose, it sounds like this web page would be of use to you.
    iPhone Repair and Service - Apple Support
    Regards,
    Jeff D. 

  • HT1750 I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    Don't know.  Could be any number of reasons.  Re-read the how to install RAM manual again for your model iMac.  Double & triple check to make sure you purchased the right RAM chips.   Make sure they are seated properly.  If you didn't hear a snap when seated, the RAM is not properly seated. 

  • My MacBook will not turn on properly. I have turned it on while holding the  option key clicked the HD and now nothing. What is happening!?

    I have tried everything. I don't no y my computer won't turn on. I pressed the option key while turning the computer on clicked the hd icon and now nothing just a grey screen and my mouse icon

    Chipmunk International BV | Home | Aanbiedingen | Produkt Overzicht
    If you don't have an account but would like to open one click here.
    1301...
    Model introduced: 2009
    Serial number: W89380AH9GU (cleaned up from 'W89380ah9gu')
    Production year: 2009
    Production week: 38 (September)
    Production number: 357 (within this week)
    Model Number: MB881
    Group1: MacBook
    Group2: nothing
    Generation:
    Machine Model: MacBook5,2
    CPU speed: 2.13GHz
    Family name: A1181
    Screen size: 13 inch
    Screen resolution: 1280x800 pixels
    Colour: White
    Memory - flavour: DDR2-S-800
    Memory - number of slots: 2
    Memory - maximum total: 6GB
    Memory - largest module: 4GB
    Toebehoren en uitbreidingen bestellen:     Art#     Prijs
    2GB SO-DIMM geheugen Mac 200pin DDR2 800MHz     A-3571      € 29,00 ex BTW
    Power Adapter 85W voor MacBook (16,6v)     A-4020      € 18,00 ex BTW
    Factory: W8 (Shanghai China)
    External link: Repair guide by iFixit
    Uitbreidingen: Uitbreidingsmogelijkheden van dit apparaat
    Please enter any (extra) information you have on this model in the box below. (Type of Mac, CPU speed):
    If you like this service and it has been of use to you then please donate us a dollar (just one will do). All donations no matter how small are greatly appreciated!

  • While upgrading, Hold option key on restart abd receive a imagine of a lock

    While upgrading or replacing OS 10.2 to 10.4, I Hold option key on restart and receive a imagine of a lock. Haven't the password to unlock. WHAT TO DO? Please. Any work around, or does anyone know a boss password. The usual haven't worked. Thanks in advance for your time and attention.

    Bought Ibook from state of Maine. Yes Bought it. Unable to get the firm password. However in the article link offered by Duane, it refers to bypassing this password by
    "1.By any administrator user, as designated in the Accounts preferences (or in Server Admin).
    2.Via physical access to the inside of the computer.
    3.When the computer is started up in Mac OS 9. "
    Ok I have physical access, does this suggest I just yank the battery, or is there a switch somewhere?. Thanks for all the input, your help is invaluable!!!
    Sally

  • Troubles with remote installation on older macbook- problem arises when I restart computer while holding down option key

    I've got remote disk sharing set up so I can upgrade my operating system from my desktop using snow leopard CD. My Macbook is able to read disk remotely and all goes well following directions for installation until I am supposed to hold down option key while restarting computer. When I do this, only my hard drive is an option for start up, not the hard drive and the disk as it shows in the instructions and pop up menu for start up. Why? What am I doing wrong with the start up? Also, it says I should be able to choose the Airport network, but my computer automatically connects and anyways, that is also not an option from the pop up menu (to choose a network and enter password), that pop up menu section doesn't show up at all, it goes right to choosing disc icon where only mac hard drive, not mac os x install, is an option. Does this make sense? I'm giving up for now.
    Thanks.

    The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

  • Left SHIFT key always truncated with OPTION key

    Every time I press down the left shift key the option key also gets activated. For instance, leftshifta=Å, leftshiftq=Œ and so forth. I noticed that when I went through the initial setup and confirmed with the keyboard viewer. How can I get this fixed without taking the computer back?

    Welcome to Apple Discussions
    You can't fix this yourself you'll have to take it back to Apple and have them replace the keyboard.

  • Firefox crashed while automatically downloadingthe latest version, and when I reopened it, it did not give me the option of restoring my lost tabs. Is there any way to recover them now?

    I don't know what more details to offer. The browser crashed, all my open tabs were lost, and when I restarted Firefox, it did not give me the option of restoring the tabs. I really want them back. Is there any way to roll back and recover them?

    That gripes me to no end, as well. You might think Mozilla could think this one through, at least to the point of realizing there should be a manual means to recover open tabs NOT restored automatically after a routine FireFox crash.
    And if Mozilla cannot stabilize FireFox, it will keep losing users back to IE.
    The epidemic of crashes seemed to begin when FireFox "improved" itself with the idea of running 3rd party plugins in a "container", which is still far from reliable. I must run SysInternals Process Explorer at least once per Windows session to keep FireFox from destroying itself.
    Aside from FireFox being so unstable, Mozilla should show some concern for users and make the manual restore option very plain from the UI-- such as "RESTORE OPEN TABS LOST SINCE THE LAST (*&&!!! FIREFOX CRASH"
    Presumably-- and that may presume too much-- Mozilla leaves the open tabs "log" in place during each update. If that record of open tabs remains untouched from update to update, then why does FireFox screw up, update after update, and routinely fail to recover all tabs?
    You might think someone at Mozilla would realize something is wrong. I have let Mozilla "phone home" after each crash, and yet the problem continues.

  • I have been trying to use an apple wireless keyboard with my ipad 2.  I will be typing then suddenly the ipad will repeat the key strock about twenty times.  It drives me crazy.  What is happening and why?

    I have been trying to use an apple wireless keyboard with my ipad 2.  I will be typing along and suddenly the ipad will take off and repeat the key stroke about twenty times rapid fire.  It really makes me crazy.  What is happening and why?  Help

    Found this thread by searching the forum. I hope it helps.
    https://discussions.apple.com/thread/5471311

  • Can't boot iMac, problem started after loading OSX. When I press power button I see Apple logo, twirl and a bar. Looks like is loading but after few seconds it shuts it self off

    I can't boot my IMac. I loaded OSX and first mail then contacts start acting up.
    I shut down and now the iMac won't boot. When I press the power botton it comes on, I see Apple logo, swirl and a bar which saw loading for a few seconds and then shuts it self off.
    HELP!

    Try an SMC reset first, and if that doesn't help, follow up with a PRAM reset:
    https://discussions.apple.com/docs/DOC-3603
    If you're still having problems try a 'Safe Boot' - restart holding down the shift key until you see a grey progress bar. Once booted restart as normal from the Apple menu.
    If that doesn't work, boot into the Recovery HD, launch Disky Utility and check the Macintosh HD using the 'repair disk' option. If anything gets fixed click on repair disk again until you get a clean pass, then restart as normal from the Apple menu.
    To start into the Recovery HD restart holding down Command + r
    More about the Recovery HD here: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

Maybe you are looking for