I previously owned iPod Touch -New iPhod Nano 7th Gen. Can't  seem to be recognized by iTunes or Sync

I previously owned an iPod Touch. I received an iPod Nano 7th Gen. for Christmas. How can I get the device to be recognized by iTunes and Sync my music? I tried all the Troubleshooting and it doesn't seem to work

Try this one:  iOS: Device not recognized in iTunes for Windows, http://support.apple.com/kb/TS1538
Then see Purchasing iOS 3.1 Software Update for iPod Touch (1st Generation), http://support.apple.com/kb/HT2052

Similar Messages

  • How to register a previously owned iPod touch

    I bought a used iPod touch and want to register it with my Apple acct but Apple won't let me bcuz it has been registered to a different acct. How can I add it to mine?

    All you can do is restore the iPod to factory settings/new iPod and set it up with your ID.
    Apple old restristations site now says:
    The Apple Product Registration website is closed.
    If you’re trying to register an Apple product, chances are it’s already registered. Most Apple products can be registered when you turn them on for the first time and begin the setup process. Service and support for your Apple product are linked to its serial number, so it’s OK if you don’t register it. If you'd like to check the service and support coverage for your Apple mobile device or computer, click here.

  • HT3965 I got what appears to be a reconditioned (pre-owned) iPod Touch 4 for Christmas.  How can I change the Apple ID on tis device so I can use it with my iTunes Acct and Wi-Fi network?  Thanks.

    I received what appears to be a reconditioned iPod Touch 4th for Christmas.  How do I change the Apple ID on the device to my ID so I can use my iTunes account?  Thanks for any help/

    It would probably be best to attach the iPod to a computer and restore it. This way you'll know it's wiped clean. Then, when you start up the iPod it will ask you for your Apple ID.

  • My iPod Nano 7th gen is not recognised by either PC or iTunes

    So I just downloaded some new MP3 files and was looking to connect my 7th gen iPod Nano to my PC to sync them on.
    Upon connection, I recieved a message from iTunes saying:
    "An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again. If the problem persists, uninstall iTunes, then install iTunes again."
    Not only have I disconnected and reconnected the iPod more times than I can count, I have stopped the iTunes service once, restarted my PC twice, reset the iPod four times, unplugged my printer's USB, checked the cable (it is the original iPod cable) and a whole host of other things in order to get it to work. I still cannot get my PC or iTunes to recognise the iPod.
    Please, any ideas? I'm really stuck here...

    Hi there  - I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
    1) iTunes
    2) Apple Software Update
    3) Apple Mobile Device Support
    4) Bonjour
    5) Apple Application Support
    Then you restart your computer.
    Then you install the latest version of iTunes (which will reinstall all those things you uninstalled).
    Then you restart your computer again.
    Mine is working perfectly again now.
    I hope it works for you,
    Carmen.

  • TS1410 My IPod nano 7th generation all of sudden is not recognized by ITunes. I have tried every step provided by Apple on how to change this and nothing works. Please someone help!!

    For some reason my IPod nano 7th generation is not recognized by ITunes. It has recognized it up until today. I have followed every step that is provided for troubleshooting and nothing is working. Does anyone have any suggestions?

    Hello sipsy12,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Have a nice day,
    Mario

  • TS1538 iPod Touch with blank screen that doesn't shut off and not recognized by iTunes?

    I opened the app "MyTown 2", and it stayed on the opening screen for about 5 minutes - WAYYY too long! So I tried to close the app. A slight grayscale sort of film "slid" down over the opening screen, and then it went to this light gray, completely blank screen. It's been that way for over an hour - no matter what I do, can't do a hard shut down, and the device is not recognized by iTunes at all. It's completely DEAD!!!! Is there any hope? Anyone have a clue?

    Following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPod Touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the device in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • How do I delete camera videos from my iPod nano? I can't seem to do it from iTunes unless i'm missing something

    How do I delete camera videos from my iPod nano? I cant seem to do it in iTunes

    You delete the videos directly from the iPod Nano, not iTunes. 
    iPod Nano 5th Gen. User Manual

  • My Ipod Nano 7th gen will not connect to my labtop? Itunes says "An Ipod has been detected, but could not be identified." Can someone assist me?

    I have tried to go into my device manager and uninstall the apple ipod usb device that is listed, and nothing is working.

    Hey taye909,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article addresses this error message and may provide a resolution to your issue:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Thanks,
    Matt M.

  • Nano 7th gen USB port broken - device not recognized message

    Ipod Nano received for Christmas. Worked fine. Plugged into charge. Tried it today and won't power up, when I plug into the PC, I get a message that the device not recognized. The port doesn't appear to be working. What do I do?

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • I just upgraded my new ipod touch to the latest software.  Can I remove it and go back to previous version?

    I just upgraded my new ipod touch to the latest software.  Can I uninstall and go back to factory version?

    Thanks fang22 for your help.

  • IPod nano 7th gen (brand new) doesn't recognize Headphones

    I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
    This is what happens:
    When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
    When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
    When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
    I have also restored the device in iTunes, and updated with no luck.....
    Thanks in advance for any useful answer!
    iPod nano

    First, make sure the headphones plug is completely inserted into the nano's headphones jack.  It should "click" into place.  The fit may be tighter than expected, especially when new.  There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
    If that is not the problem, you should have the nano looked at under warranty.  It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

  • Making new ipod nano 7th gen an exact copy of old ipod nano 5th gen?

    I just purchased the new ipod nano 7th gen, I have an ipod nano 5th gen, and I'm wondering if there is a simple way of making the new nano an exact copy of the old one, e.i. all the same content, settings, etc? I read through the manual and couldn't find anything about it. Thanks for any help!

    He is right that if you want to copy the content, do it through iTunes. As for the settings, some aren't identical with the 5g. For example, there is no option to edit menus or the main app icons (adding/removing) like in previous iPod nanos. I hope the put this feature back in soon.
    Your best bet is to just go through the settings by hand again; there aren't that many. Sorry if this isn't the answer you were hoping for.

  • How do I copy my library from my ipod nano 7th gen  to my new computer. My purchased songs are available on itunes but any musici downloaded from cd's to my ipod are not

    How do I copy my own cd songs from my ipod nano 7th gen to my new computer?

    See this older post from another forum member Zevoneer covering the different ways to do this.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

    I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

    I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

  • I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
    if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup.

Maybe you are looking for

  • How long will it take? --OR-- Which order will arrive first?

    *So, let me fill you in on my order timeline (debacle)...* • July 5 ... I placed order with AT&T *on the phone* for 2 16GB iPhone 4's with 2 new lines of service. (first time iPhone buyer, new -- actually, coming back -- to ATT after 11 yrs w/ Sprint

  • While doing PGI I system getting Error

    Dear SD Experts, While doing PGI in delivery system getting Error   "The batches are not defined for delivery item 000010". Error Massage :- Message no. VL605 I already defined Batches to the given item. Its appearing Under Material and its specified

  • App Idea - submit a proposal

    I have an idea for an iPhone app but am unsure of how it fits with Apple's content policies (no it is not pornographic!). Is there anyway of submitting a proposal for the app to Apple to have the concept approved before I begin development? Thanks.

  • Accruals and coupons in QP

    Hi, I am trying to set up the coupon issue and accruals feature to work in QP to satisfy the following business requirement: namely, to accrue a percentage d!iscount against sales orders that will not be applied to the sales orders at the time of cre

  • My ipod is soooo broken

    hey guys i lent my ipod to my bro, when i got it back, when i turned it on, the apple logo came up but then a black and white apple power adaptor next to a wall plug thing came up. i cant get rid of that, and he doesnt know what he did, but i think h