I purchased a 3TB Airport Time Capsule After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups and it wants authentication but no box is available to provide my administrator name can anyone help ?

I purchased a 3TB Airport Time Capsule to use with my Mac running latest Maverics. After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups from my small driveand it wants authentication but no box is available to provide my administrator name can anyone help ?

I overcame the permissions by allowing both paths to have read and write access to anyone but that didnt solve it until I copied it into the DATA directory which I created on the Airport Time Capsule.
I had already discovered the TIME MACHINE How to transfer backups but I am struggling still with the item and cannot currently get it to work. My setup seems to have created a wireless link to my router which is what I wanted and in that set up there are three options. I have simply gone for the extension of my network. I ignored the other option there which I cannot remember something like DNS? That may be the problem becasuse when I remove the Ethernet connector it just doesnt go anywhere.
I have also found I cannot update my TIME MACHINE software (currently 1.3) as although Apple tell me I should be able to set backups hourly daily or weekly I have only ever been able to run it hourly when i would prefer longer intervals so thought an update might be necssary.
Also tried to get an update for my Airport Utility (Currently 6.3.2 but cannot find one even though I have read there might be one available and again this might be the problem.
Have reset the Time Capsule now about a dozen times.
Following the instructions and trying to copy my existing backup it suggests you need to copy it to the root directory but that is when I get some sort of security issue and I found I could only get it to accept if I dragged my .backupdb to the DATA directory on the Time Capsule. I dont even know if I do this it will work when I come to use it.
I therefore found your reply of no more help than i had discovered but I hope you return to read this note because I really do need some help.
I am intending starting again in the next couple of days and fully documenting what I do and what I see and then as I suspect it will be no different and I will then seek an appointment at the Apple Store in Trafford Centre and if that proves unsuccessful then I still have time to return and become a dissatisfied customer with Apple for the first time in a long experience with Apple. I have noticed frightening notes on the conversations which point to problems of Mavericks working with Airport Time Machine!! So in the end it might not be me doing anything wrong. Unfortunately you do feel left out in the dark sometimes that is why I hope you can respond with a solution?

Similar Messages

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

    I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8  Can't seem to download the upgraded software.  Can anyone help?

    Please review the System Requirements for the Time Capsule.
    http://www.apple.com/airport-time-capsule/specs/
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

  • My apple TV has worked flawlessly since Xmas 2011.  Now when I download a new movie, it tells me the movie won't be ready for 6  hours.  I haven't changed my internet hardware or provider, or speed. Can anyone help?

    My apple TV has worked flawlessly since Xmas 2011.  Now when I download a new movie, it tells me the movie won't be ready for 6  hours.  I haven't changed my internet hardware or provider, or speed. Can anyone help?

    Winston is right. If it seems OK though, I would also add that you should make sure to check it at the same day and time you have tried to download the movie. I had the same thing happen to me and it turned out my speed was fine much of the time but was dropping to like a few hundred kbps from about 7-11 evenings (typically when we were trying to order a movie).
    Steve

  • HT1491 ***!!!  I have not been able to access the itunes store for many months now.  I backed up all my purchases and reinstalled itunes and I still cannot access anything at all.  Anyone else have this problem?  I'm on an Alienware comp with Windows upda

    I have not been able to get onto itunes to check my account or purchase anything for about a year now.  Got an Alienware system with latest Windows.  When I pull up itunes I can access my old music but cannot access my account to purchase anything new.  Just reinstalled itunes and it still does not work.  I am ready to just quit.  Anyone else having this issue?  Solutions?
    Thanks!

    If this is an Alienware system, the most likely culprit is the Bigfoot Networks LSP as per the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    Head to the Downloads and Drivers page at Dell for your particular model of Alienware. Look for available updates for your BigFoot networking device. If you update those drivers, does that give you back your Store access?

  • Can i use the Apple store App without providing Bank or credit card details! all i want is free apps why do i have to give my details if im not going to spend money? can anyone help

    Do i have you submit my bank details to download a free App of the store??? someone please help

    If you only want the free apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID. 
    You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • The airplay option is not longer available in my device preferences.  Can anyone help me with this?

    I can no longer connect to apple tv or my airplay device.  The option in settings to allow access to airplay devices is also missing.  Does this have a fix?  I have a Macbook OS X 10.9.4 (13E28)

    Hi Beverley2u,
    If you are having issues with AirPlay not being available, I would suggest you troubleshoot using the steps in this article -
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I'm trying to wipe out everything off my Macbook Pro.  When I get to the disc utility, the erase tab only erases current available space, not all data.  Can anyone help?

    I'm trying to erase everything off my MacBook Pro to transfer the computer to a new owner.  When I get to the disc utility, the only option is to erase "empty space," not entire contents.  Can anyone help?

    Try OS X: How to erase and install - Apple Support

  • I have a MacBook Pro 13" and am using Airport Time Capsule and iCloud. I delete my cookies all the time, but every so often the cookies reappear after rebooting. It is the exact same amount of cookies each time, so I wonder why they're being reloaded?

    I have a MacBook Pro 13" (2010) running OS X 10.9.2   and have Airport Time Capsule. I routinely delete my cookies and often (every couple days or so) when I reboot, a number of cookies reappear in my Safari settings. The number of cookies that reappear is exactly the same when it does it (351 cookies) so I'm wondering if it is related to my Airport Time Capsule or possibly iCloud? How do the cookies get back into my MacBook Pro? Or.... Have they ever actually left? Befoer I reboot, I delete them and sometimes they stay gone for 24hrs or more, but then reappear the next time I reboot. Can someone tell me if there is a way to clear the cookies so they won't come back?

    Blocking all cookies in Safari does not work. Deleted cookies will not stay deleted. There are numerous threads on this going back years, both in these forums and elsewhere. Many claim to have submitted the issue to Apple, but I have never seen anyone post a reply.
    I have seen many suggested fixes that involve finding the cookies file, some including Terminal manipulations, and none seems to work universally. I can find noplace where Apple addresses this officially with an actual Apple-approved explanation or how-to.
    Bottom line, your browser's security features should do what they claim: delete cookies. When they come back without ever even visiting another page, this is clearly not working in the way a reasonable user would expect.
    Bottom line, Safari does not protect users' privacy in the way it pretends to and, after so many years of this issue, it appears that Apple wants it this way.
    Having spent way too much time on this, I realize the choice is between Safari which is pretty well optimized; Firefox which is a lot pokier, at least for me; and Chrome, which I assume funnels personal information directly to Google.

  • Cannot see NAS units after upgrading to Airport Time Capsule.

    I just upgraded my router from a D-link DIR 655 to a new Airport Time Capsule and I cannot no longer see access my Drobo NAS units. 
    http://www.drobo.com/products/professionals/drobo-fs/
    I am using Mountain Lion OS 10.8.5.  I know when using OS 10.8.5 I have to ensure that DDServiced and DDServiced64 are Allowed.  I have done this in the routers settings.
    http://store.apple.com/ca/product/ME177AM/A/airport-time-capsule-2tb
    I cannot see the NAS units on my PC (Windows) either.
    My internet works (wirelessly and physicall) so the router is connecting to my modem correctly.  However I cannot access these NAS units nor their shared holders on any comptures or wireless devices in my house.
    Is the Airport Time Capsule the issue here?  Is it compatible with the Drobo FS NAS?
    Thanks

    I am running the latest version of Drobo Dashbloard on both my Mac and PC 2.5.2.
    I only see DDServiced64 under Apple Symbol to top left of Menu\System Preference\Security and Privacy\Firewall\Firewall Options.
    Given that I cannot see the Drobos on either my Mac or PC I am wondering if:
    1) is the new Apple Airport Time Capsule causing problems; or
    2) is the Norton Antivirus that is on my PC conflicting with a setting on the Apple Airport Time Capsule
    None of this was a problem when I used the previous router (D-link DIR 655).  I could access both Drobos on both my Mac (wirelessly) and PC (physically connected to the the same router as Drobos via network cables).
    When I was using my D-link DIR 655 I was using DCHP and using static IP Addresses for all my devinces in my house.  Now when I changed my router over to the Apple Airport Time Capsule I did not opt to use DCHP.  Could this be an issue.  Note I am not having any problem with any of the other wireless devices in my house.  I can see all my Sonos wireless music equipment.  However I cannot see the two Drobos that are physically connected to my Apple Airport Time Capsule.
    Thanks

  • How to connect New Airport Time Capsule to non Apple asdl router

    Guys,
    I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
    My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
    Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
    Best, Anthony

    thanks LaPastengue!
    Here is what ive got
    What ATT router do you have? Exact make and model please.
        gateway 2wire from at&t
    What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
         yes I have the latest airport time capsule 2TB
    Please tell us the full setup.. what is currently plugged into the main modem router??
         The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
    Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
    Open the airport utility and change the TC to bridge mode.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
    Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

  • How to add Airport Time Capsule to an existing AT&T U-Verse Network?

    Hello, and please bear with me as I am not very tech savvy I just purchased a 2TB Airport Time Capsule (5th Gen) because I'd like to backup my Macbook Pro wirelessly. I've tried customer service with my ISP without luck, AT&T U-Verse. I currently connect through a 3801HGV 2wire dsl modem/router and think I'm stuck using it since numerous other devices are hooked up through it and I'd rather not re-setup them up.
    I'm having issues connecting the TC to my existing network. When I use the Airport Utility (tried both while TC is hardwired to my computer, and to the router/modem) it doesn't detect my 2wire network, another network I assume is my neighbor's.
    From reading through other posts with similar issues it sounds like I can't use the Airport TC to extend my existing network, say if the U-Verse router was upstairs, Airport TC was downstairs is that correct? Do I have to hardwire the TC to the router/modem?  I've found some screen captures of the Airport Utility but I cannot find them. I noticed that they were pre-Maverick screenshots so perhaps the menus have changed?

    Do I have to hardwire the TC to the router/modem?
    Yes.
    Connect an Ethernet cable from a LAN <-> port on the Uverse gateway to the WAN "O" port on the Time Capsule.
    Power up the TIme Capsule (TC) and let it run few minutes, then hold in the reset button on the back of the device for 10 seconds and release. Allow a full minute for the TC to restart, at which time it will be slowly blinking amber.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Other Wi-Fi Devices tab at the upper left corner of the screen
    Click on the Time Capsule now and AirPort Setup will open up automatically and take a minute to analze the network.
    Click on Other Options at the lower left of the window
    Click the button next to Create a new network
    Enter a name for the network and a name for the TC and a password and click Next
    Skip the step about cycling power on the modem
    Wait while AirPort Setup sets up the TC, then click Done
    Now click on the TC icon in AirPort Utility
    Click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode to Off (Bridge Mode)
    Click Update at the lower right of the screen, then click Continue and wait for the TC to restart again
    You should now have a green light on the TC
    You can use either the Uverse wireless network or the TC wireless.  If you want the best wireless performance, use the TC network.

  • How to configure Airport Time Capsule with IP Camera?

    I have recently switched from a DLINK Router (DIR-655) to the latest 3TB Airport Time Capsule. The ATC works great, super fast etc...
    However...
    I had an IP Camera (Trendnet TV-IP572-WI) connected to my DLINK Router, using a Dynamic DNS account (dyndns) to access if from outside my home (i.e. from the Internet). The configuration on the DLINK was quite straightforward. (Virtual Server)
    Question: How to do the same with Airport Time Capsule ?  I had a look at the detailed settings menu in the Airport Configuration Utility. but cannot find anything like this (Virtual Server, Port Forwarding etc...)
    Many thanks for your help !

    What is the make and model number of your "modem"?
    Most modems these days are actually modem/routers or gateway devices....which would require that the port forwarding be done on the "modem"....not on the Time Capsule.
    If you did not see any settings for DHCP Reservations and Port Settings when you looked around in AirPort Utility, this indicates that the Time Capsule is likely configured to operate in Bridge Mode.......and it is your "modem" that is actually the router for the network.
    Open up AirPort Utility again, click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click the Network tab at the top of the window
    Check the setting for Router Mode.......which is likely set to "Off (Bridge Mode)"
    Is it?

  • Can I use the Airport Time Capsule Wirelessly without being connected to my router/mac by ethernet?

    Hey
    I've recently bought a 3TB Airport Time Capsule, with the sole intention of being able to perform wireless backups.
    Is it possible to perform these wireless backups without being connected by ethernet to my modem/existing router?  I don't want to use the time capsule as a replacement for my existing router (at this stage) - just for wireless backups of my Macs.
    If this is not possible, or practicable, are there other alternatives that I should explore? (non-cloud)
    Thanks in advance
    Steven
    PS
    Boring background:
    I'm in a rental property with a woefully inadequate number of plugs in practical places. In addition there is only one phone socket. The result being insufficient safe space to have the existing router, and the Airport TC along with the existing electrical items.

    Unfortunately, Apple designed the Time Capsule to connect to a modem or modem/router using an Ethernet connection.
    If you do this, you do have the option of turning off the wireless on the Time Capsule and using your existing wireless for backups. Backups will be automatic this way, in the background. The Time Capsule could be located anywhere an Ethernet cable will reach.....up to 300+ feet or about 100 meters.
    The other option.....not recommended and not convenient at all.....is to set up the Time Capsule......without an Ethernet connection and then have the Time Capsule provide a wireless network that would not have Internet access.
    So, when you wanted to back up, you would have to manually "switch" to the Time Capsule network for that process, then once the backup was done, manually "switch" back again to your normal wireless network for normal operations.  A real mess, not to mention the possibility of wireless interference between the networks that may create other issues.

  • OS X 10.8.5 - Unable to backup to AirPort Time Capsule

    I have just updated to OS X 10.8.5 on a 2006 Macbook Pro - and now I cannot perform a backup on my AirPort Time Capsule.
    It asks me to confirm the AirPort Time Capsule that I wish to backup to - but this does not seem to be working and I cannot currently perform the backup.
    Immediately after this failure - I was able to successfully back up another iMac to this very same AirPort Time Capsule:
    - so the AirPort Time Capsure appears to functioning normally.
    The iMac is still running on OS X 10.5.4 - and has not been updated to 10.8.5
    Is there a problem with  backing up to the AirPort Time Capsule using the new OS X 10.8.5 ?

    I should also add that I have previously been successfully backing up from the Macbook Pro onto the AirPort Time Capsule for many years without problem.
    It is only just now that I cannot backup after having updated to OS X 10.8.5

Maybe you are looking for

  • Problem with CFCHART on CF10

    CFCHART is not rendering on our server for some reason. We  cache to disk and are generating a .SWF file. The. SWF is in the chart cache folder ok, and can be viewed separately, however it will not render within a web page. When we view source we see

  • Error in Email on N810

    I have a N810. About 2 weeks ago the email app stopped working. When I start the email app my Inbox appears and after about 10 seconds there is a dialog box that says Error occurred. There is no other information and the email app closes. I am unable

  • Create prq with reference

    Hi Gurus, Where in purchasing are customizing settings for PRQ creation with reference to another type of document.... contract.... PO order.... is this possible in MM? In sales this is easy and solved with copying control... Thanks + br Saso

  • Need help with photoshop elements8

    When creating a photo from elements8 and want to share and after choosing the photo and go thru the proper steps and go to send the photo, up pops a screen telling me I need to choose a default email to do this. Has photoshop discontinued this servic

  • OpenDocument sintax for MDX

    Hi, i have to open a webi report which is build on a OLAP Universe, which structure is coming from a Bex query built on BW. in this bex query i have some selection criteria, that are translated into webi prompts automatically. my main question is: ho