I purchased a itouch 2g and i went to restore it and it wont boot plz help
i bought a itouch 2g model#A1288 and when i did a system restore on it because it had a bunch of junk on it it wont completely boot the apple logo turns to a skull and freezes please help i payed $200 for it off of some random guy so i cant get a refund
If you on OS X Mountain Lion, like if you purchased a recent Mac, you may need to head to Apple Menu > System Preferences > Security > General and set the downloads to "Anywhere". to install software from the web.
Also you need to check the compatabiity of the program your downloading with the operating system version your running. There seems to be a hardware requirement/license also.
You may find more assistance here
http://serato.com/dj/faqs
or here
http://serato.com/forum
Similar Messages
-
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
Macbook pro froze and now wont boot up - Help please
Hi
The issue randomly occurred when I was on Google chrome and I wanted to move an app that was downloaded in the wrong place. I went to click finder and it wouldn't open, tried system preferences it wouldn't open. It also wouldn't let me use any of the functions on the menu bar so I was pretty much stuck, however I could still use chrome. After which I closed the lid which enabled sleep mode. Just now I went to open it from sleeping and all there was, was a black screen and my mouse cursor.
I couldn't do anything, even the keyboard shortcuts and had to force shut down by holding the power button.
After which I was greeted with the following screen:
http://imgur.com/EzuzPSW
I didn't press anything and I noticed that my mac kept rebooting and kept showing that screen. Instead of leaving it I pressed a key and this came up:
http://imgur.com/l9Q1mgg
That screen would come up for roughly 3 seconds then it would reboot showing this screen again
http://imgur.com/EzuzPSW
After about 3 times of auto rebotting this screen came up:
http://imgur.com/G1G4Fj7
And now all that appears when I turn the system on is this:
http://imgur.com/EzuzPSW
When I press a key I get this
http://imgur.com/l9Q1mgg
it reboots and this keeps repeating.
Can anybody explain this issue ? I take it, its a HDD problem is there anyway I can save my data still or is it lost ?Your MBP is suffering kernel panics.
Try SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a Safe Boot:
http://support.apple.com/kb/HT1564
If no success, try to access the recovery partition:
http://support.apple.com/kb/ht1310
Select the recovery partition. From the 4 option menu, select Disk Utility>First Aid and run Verify and Repair.
What are the results?
Ciao. -
Having purchased an itouch 4 and installed itunes 10.5 for my daughter on her laptop i now cannot copy films into movies on itunes. Even though I always did with my itunes and her ipod on my laptop.
Any thoughts please?Have uninstalled then re-installed iTunes and it sees my iPhone but doesn't show the battery state.
I have rebooted my laptop and, guess what, iPhone is now NOTseen! Who designed this software, an idiot? Oh, I forgot Apple programmers don't know anything about Windows especially Windows 7. I still think this has to do with the differing formats as if there are pictures on the iPhone, Windows sees it as a camera and it is possible to see the pictures in Explorer, so these must be stored in FAT format. Maybe someone needs to design the phone to tell Windows that it's a phone and tells Windows to load the correct drivers. Maybe that's too difficult! -
I have rented a movie on Itunes, it says i must download it, so i click to download it and all it does is say 'accessing Itunes store' and thats it, it says after downloading, check your purchased movies, i check, and nothing is there, please help?
Did you make sure that your security software is not blocking the contact to Apple servers? iTunes for Windows: Troubleshooting security software issues
-
i can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline
DL the SE 6 JRE from http://support.apple.com/kb/DL1572.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?
Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps. -
my ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........
3.5.x will be supported until August.
http://www.mozilla.com/en-US/firefox/all-older.html
Also see: [[Installing a previous version of Firefox]] and [[Installing Firefox]]
If you want to troubleshoot your problems with Firefox 3.6.x you can start with [[Firefox hangs]]. Start basic troubleshooting with [[Safe Mode]]. -
every time i want to update my phone, i see an alart message saying that the firmware file is corrupted...what do i do now....i am using 5.1.1 and it is jailbroked.......i face the same problem while restoring......plz help.....TOUFIQ
Jailbroken phoned are not supported here. Anything could be wrong with it - it is jailbroken.
-
Whenever i start my mac the rainbow wheel pops up and it wont go away, help!
whenever i start my mac the rainbow wheel pops up and it wont go away. help!
This would indicate a severe hardware problem, in most cases the hard disk, or a software problem, in most cases outdated apps, which conflict with the system. As long as it is persistent, you probably cannot use your mac. Restart by pressing shift key after chime and wait to get into the system, will take longer. When there, deactivate all apps, which start up at login: system preferences/users and groups/login items, then restart normally. It should work now. If yes, try to determine what outdated app or utility may be the cause, and update it or delete it.
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I purchased an explicit song and it wont transfer/sync to my music on my ipad
i purchased an explicit song from itunes on my computer and it wont sync/transfer to my music on my ipad what do i do
Check to see if you have Restrictions turn on and what the setting is for explicit content:
Settings App > General > Restrictions > [If Restrictions are turned on, you will need to passcode to change the settings]. -
I tried restoring an itouch 3g and it wont turn on
HELP! I just bought a used itouch 3g and I hit the restore button on it and it wont turn on well it does but doesnt go from the apple on the screen and it does nothing when hooking up to itunes
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Purchased X-FI Xtreme Music and PC wont Boot at
Hello all,
I Purchased a new X-FI Xtreme Music, it has a passiv cooler on the Chip. The PC wont boot at all, I own a Asus A8N5X with the 004 Bios (tried the 0902 as well)I tried all 3 PCI slot, none working. Help is most welcome,I had exact the same problem, try any PCI card I can tell you now none will work! Why? Because the A8N5X is broken, I did returned it to ASUS and demanded a A8N-E, Sorry for the Trouble but there is NO fix I tried for three Months, Cheers
-
Disk stuck in computer and it wont boot to OS X.
I have a 2006 Mac Mini running snow leopard, Modle# A1176(not sure if this is needed). I started to install windows 7 onto my mac mini via bootcamp. went to a black screen that said
1.
2.
Select CD-ROM Boot Type
I googled the problem and found this thred that said that said the computer displays that message when it is 64-Bit disc, which i did put a 64- disc in. this is all fine because I have a 32-Bit win7 disc. the Problem is the computer wont boot back up into OS X so i can eject the disc and put the other one in. i have google how to take the disc out, I have tried holding the mouse down to eject the disc on boot up. i have tried holding down command to see if i could boot up to osx i also tried this with control and option keys. help how do i boot back into OS X or get the disc out! HELP!!Can you see your Macintosh HD in the Startup Manager if you startup holding the Option key?
Noting that: you may need to use a USB keyboard if your using a wireless one and it has become unpaired.
Startup Manager: How to select a startup volume
Maybe you are looking for
-
How can i send videoes which are not in camera roll via whatss app to others ?
hi, I am going to know that how can i transfer video which are not in camera roll via whatss app to others ? thnaks in advanced.
-
Mac Mini, screen share setup over network out of the box?
Greetings, Is it possible to screen share and setup a new Mac Mini out of the box? Ultimately, I'm trying to figure out if I really need to purchase a separate screen just to setup the machine. Thanks,
-
Misconfigured rcap on Solaris 10 with zones - SMF fails to start rcap
Hi, I have just installed Solaris 10 on a brand new T5220 server (Niagara processor, 16GB of RAM). After creating first non-global zone with capped memory and cpu, SMF fails to start rcap service: +root@bs10 [~]$ svcs -xv+ svc:/system/rcap:default (r
-
How do I import photos to my computer from iPod
How do I import photos from my iPod to a computer?
-
Access Metadata Property from java iview
Hi All i'm developing a search engine that will take into consideration some property metadata within the search. i have some dropdownlists in my search page and i want them to get the values from a property metadata in my KM. i will appreciate your