I purchased a new Windows 8 PC. I have used and continue to use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar sinked properly with my Iphone 5. Now with the new Windows 8 PC, it does not. Help!

I purchased a new Windows 8 PC and I use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar would sync with my Iphone 5, but with the new Windows 8 PC and Outlook 2010, it does not, and I can't figure out how to snyc them. The emails from Outlook 2010 sync, but the calendar does not. Help! Thanks. 

Easy solution for restoring lost calendar informaiton, thank goodness.  On your iPhone, go to settings, then to iCloud.  If your Calendar selection is turned off,  turn it on.  Your info should restore.  If your Calendar selection is turned on, then turn it off.  Choose to save calendars when asked.  After it shuts the Calendar off, turn it back on.  Your info should be restored.
Thank you to Apple support for walking me through this.  Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
- JT

Similar Messages

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

    I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

    I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

  • App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

    App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

    - First try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next download the app on the computer and try to sync.
    - Last, restore from backup.

  • WHY---------???? WHY can't I use my bluetooth for voice commands with the driods?

    I purchased a droid1 and found out very quickly that my bluetooth COULD NOT BE USED WITH THE DROID OR VOICE COMMANDS-----IT IS NOT A HANDS FREE DEVICE!! I paired my bluetoot with the droid and expected to make calls as I did with my OLDER phone but NOPE-----IT WILL NOT WORK-------YOU HAVE TO "TOUCH" THE DROID TO MAKE A CALL BEFORE YOU CAN TALK VIA BLUETOOTH! WHAT ARE THESE PEOPLE THINKING? A basic function (AND LEGAL) like voice command calling wasn't put into these driods? PLeaase..........what--why-----how-----could they overlook such a basic and legal requirement (MOST STATS REQUIRE HANDS FREE OPERATION)..............I'm baffled and extremely disappointed because I can not use any of these 'smartphones'=droids.
    Be very careful before you buy one without being informed of this flaw--------the DROIDS are not HANDS FREE DEVICES--------sadly.

    I had the same shock when purchasing 2 new Droids less than a month ago. The store rep emphatically told me that Bluetooth dialing worked but of course that was wrong. The Froyo 2.2 version corrects that -- if you haven't received an update notice from Verizon you can get it here: http://www.droid-life.com/2010/08/03/manual-android-2-2-update-for-motorola-droid/  and do it yourself. it's pretty simple.

  • When IOS 7 came out I updated my iphone but it took over 7 hours. It frustrated me and disconnected me so I had to restore my Iphone. Now I tried updating IOS but it is doing the same thing...its been over 7 hours

    When IOS 7 came out I updated my iphone but it took over 7 hours. It frustrated me and disconnected me so I had to restore my Iphone. Now I tried updating IOS 7.0.2  but it is doing the same thing...ive practivally been waiting the whole day,,,i need help

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • I cannot past with the lastest version. CTRL V does not work either

    I cannot past with the the most recent version released today. CTRL V does not work either
    == This happened ==
    Every time Firefox opened
    == When my system updated the newest version today

    Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
    See:
    [[Troubleshooting extensions and themes]]
    http://support.mozilla.com/en-US/forum/1/380010
    https://support.mozilla.com/en-US/forum/1/552540?
    https://support.mozilla.com/en-US/forum/1/472971
    Also see:
    https://support.mozilla.com/en-US/kb/Clipboard+not+working
    http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
    http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, <u>'''but'''</u> do look at the two bulleted items at the bottom "'''<u>NOTE for IE:</u>'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • What is up with the Quicktime 7.2 upgrade, it DOES NOT WORK!

    Quicktime 7.2 Internet Plug-In does not work with Safari? I am very up to date with all the upgrades to maintain security, and this most recent "upgrade" while may be plugging a security hole for the iPhone does not maintain past functionality. I have searched and done most if not all the suggested fixes (repairing permissions, removing Internet Plug-Ins, installing most up to date flash player, un checking Flash Media MIME setting, even forcing Safari to load w/ Rosetta) and am very disappointed with having to force Safari into Rosetta and shocked to hear the suggestion to abandon Apple altogether and use Firefox. I am using Safari to get away from Netscape and third party software to AVOID conflicts. Worse Firefox does in-fact work making me doubt its' security for internet banking.
    When is Apple going to FIX this Quicktime Update so that it works?!

    Same here. I don't have in Intel Mac, so it's not a Rosetta issue. I've patiently followed every tip I've read in many discussions. Reinstalled Quicktime. Installed Flash 9 Upgrade. Changed Quicktime settings (unchecked enable flash, unchecked Flash Media under MIME settings). Trashed Quicktime preferences.
    However in Safari, on upon trying to open any movie trailer on the Quicktime web site
    http://www.apple.com/trailers/
    or even watch the iLife 08 guided tour
    http://www.apple.com/ilife/guidedtour/small.html
    I get a Quicktime logo with a question mark. In Firefox (which I've also reinstalled) it quits unexpectedly when trying to open a movie trailer. In my own experiments, I've opened another admin account on my computer and when I log in there, everything works fine. You say "well just use that account then", that would mean me having to transfer all my files to the other account which I don't want to do unless someone has a really quick way to do so. Also, in checking the system preferences for Quicktime under both accounts, I don't see any difference. Both accounts are accessing the same software from the root level Applications folder, so why does it work in one account and not the other? Someone help, as I don't think I can read another 10 page discussion on this.

  • Hello,when i login with the account of my wife it does not unable her music files.could you help me please?

    I have an imac osx 10.9.5 and 3,4GHz intel core i7
    When i login with the account of my wife in itunes, it does not show me the music files from her library,but only the music files from mine.
    What do i have to do?

    i mean log into iTunes Store,but i have solve this issue by myself.
    Thank you for your support.

  • HT3131 In terms of cooling, is it OK to use demanding applications for extended periods with the internal display of my MacBook Air closed?

    I'm using a Thunderbolt display when in the office and often run one or two Parallels VMs concurrently, which makes the fans spin a lot. I'm worried that the 13" 2011 MacBook Air isn't being cooled enough with the lid closed so I tend to open it up - am I just being paranoid?

    The cooling of the MacBook Air is accomplished via an internal fan which draws in and exhausts air in the rear gap area below the hinge. This gap remains unimpeded whether the computer is open or closed. In fact, Apple has specifically designed the notebook to operate in a "normal" open screen configuration, as well as a closed (clamshell) mode. As long as you retain an adequate clearance and allowance for clean cool airflow at the rear of the Air, there is no recognized issue of whether the unit will adequately cool.
    This does not preclude that the user can also "enhance" cooling with external conduction cooling devices designed to extract heat from the heat conductive aluminum case But in normal circumstances it is not required, nor even mentioned by Apple that it is necessary to do so. In fact, Apple even sells a stand for operating the MBA in a closed, vertical position for space savings. This does in face preclude use of a cooling pad, and still it is not a problem.
    While there may be those who observe that the open case affords more surface area for direct case to atmosphere heat transfer, one must also recognize that this is probably more than offset by the fact that the device does not generate extra heat supporting a operting and lit display when closed.

  • If i am going to buy an iphone from someone, can the apple store check if it does not have an issue?

    I want to buy a phone from a friend. He states that it was brand new and there is nothing wrong with the phone's exterior or interior. I still want to check if there is anything else that I could check for. Is it possible that the Apple Store can help me check any problems with the phone? Can they also tell me the carrier of the phone? He states that it is from T-Mobile, but I still want to check.
    Thank You.
    Sara

    If you call Apple with the serial number they can tell you the carrier it is locked to. You can also check the warranty status at: Apple - Support - Check Your Service and Support Coverage and see if it is Activation Locked (a theft deterrent feature) at https://www.icloud.com/activationlock/.
    However, if you don't trust the friend perhaps you shouldn't buy it. And reconsider if they really are a friend.

  • Bring window to front - appactivate does not help :(

    Hello
    I am coding with vbscript.
    I have a need to make certain that sendkeys commands are sent to the proper program.
    I can use this to activate a window:
    success = WshShell.appactivate("MyProgram")
    if success then WshShell.sendkeys "(% ) N"
    But in Windows XP and 7 the window does not come to front. The program is activated, BUT left blinking on the taskbar below. And the key N is sent to any program that is currently open on top, for example windows explorer, which now minimizes.
    How can i make sure that the command "(%) N" is sent to MyProgram? I have not been able to find a solution for this dilemma.

    Thanks for the info
    The developer replied the situation cannot be changed.
    Is there other, a better way, i could send key commands to the program, instead of sendkeys?
    The concensus here is 'No'.  You cannot do what yo aretrying to do.  The developer should be able to explain why.  We have tried.
    Window sprotect its programs well.  It attempts to prevent rogue capture of teh mouse input while allowing for a certain amount of automation.  SendKeys is rapdly coming into disuse due to changes to the way Windows forms are generated and managed.
    If a developer wants to allow remote control then they will provide an automatin intreface that will allow you t ocommunicate with teh program.. Ideas like 'SendKeys' are a leftover from DOS basic and Windows 98 and earlier.  Microsoft has made no attempt
    to keep thi sworking in newer systems while it still supports most existing use of teh feature.
    What you are trying to do is 'LEGACY'.
    Perhaps if you reqord your question to ask how to accomplish some objective then we can point you at a solution.  SendKeys is not that solution.
    jv

  • Cannot connect to Itunes, status bar goes about half way and stops. I have tried all the fixes other people have used, no joy. Running Vista with the most recent Itunes installed. Disabled fire wall and anti virus software. Once again, I have tried it all

    Itunes won't connect, status bar goes about half way and stops, then times out. I have tried all fixes posted, you name it, I have done it. Running Vista and current version of Itunes. Can connect to Internet with any other app. Using Firefox, their latest version if that matters.
    I have seen this is an on going problem throughout the Itunes community. All I can say is 'Bad Form Apple, Bad form.'

    One more odd thing.  The itunes diagnostics believes my windows firewall is on which is it not (believe me I've checked/double checked etc) AND believes itunes is not enable in windows firewall which it is, if ever I turned WF on.  How can itunes get this wrong?  I mean, if itunes believes its being blocked, maybe that's why I'm being blocked...has anyone heard of this?

  • Somehow, i have 2 iPhoto libraries which I opened today.  The one with the vast majority of my images does not allow me to export photos.  What can I do to manage this situation?

    With my MacBook Pro, OS X Yosemite, iPhoto 9.6, I find I have two iPhoto libraries.  I discovered this when opening iPhoto today.  One has only a few old images; the other, all current images.  I cannot export images from the current image library.  Can anyone enlighten me as to why I would have two libraries and how to resolve the issue of exporting?

    What happens when you try to export from the library?  Where are you trying to export to? Are both libraries located in the same Place?  If not where are they located.  If on an external HD how is that HD formatted?
    How much free space do you have on your HD(s)?

  • TS1398 Hi...My wifi is not working. It is not dimmed out. When I turn it on it does not pick up any of the networks around me (I know there are a lot of networks available) I have tried resetting my wifi with the steps above but it still does not work. Pl

    I have the most recent update.

    That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
    Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
    Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
    Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

  • I have created a phone mobile version of a site. I was hoping it would enlarge with the spreading fingers gesture, but it does not.

    I made the text in a phone version in a larger font size than the desktop version. But some may need to enlarge it further. I was hoping that would be possible, as it is when you view a desktop version on the phone. Is this not a capability in Muse?
    As I went through Muse 'sites of the day,' most sites were not expandable on the phone.  However,  themarketaustin.com and movingcolour.tv are expandable. What is the trick to this? I have a disappointed client who was expecting this capability.

    Try adding this at this line in the head of all your html pages:
    <meta name="viewport" content="width=device-width,initial-scale=1.0,maximum-scale=10.0,user-scalable=1">
    user-scalable is the one that is important for you.
    More info: Viewport Meta Tag For Non-Responsive Design
    width=device-width
    this means we are telling to the browser “my website adapts to your device width”
    Initial-scale
    This define scale the website, This parameter sets the initial zoom level, which means if 1 CSS pixel is equal to 1 view port pixel. This parameter help to when you changing orientation mode, or preventing a default zooming. without this parameter responsive site work.
    Maximum-scale
    Maximum-scale define maximum zoom. When you access website top priority is maximum-scale=1 won’t allow the user to zoom.
    Minimum-scale
    Minimum-scale define minimum zoom. this work same as above but define minimum scale. If you not define this its work without using this is useful when maximum scale is large and you want to set minimum scale that time you can use.
    User-scalable
    User-scalable assign 1.0 means website allow to zoom in or zoom out.
    But if you assign User-scalable=no its means website not allow to zoom in or zoom out.

Maybe you are looking for