I purchased an audiobook and there are two parts/files to it. I-Tunes is only finding one of the files. How do I get it to find and consolidate the files under one book title?

I purchased an audiobook and it has two parts/files to it. I-Tunes only shows on file under the book title. How do I get i-Tunes to find and associate the two files under one book title?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Similar Messages

I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

iCloud storage is not allocated by device. iCloud storage is allocated to your iCloud AppleID. You get 5GB of iCloud storage.

Why can't I go to playback and there are two SE icons in Task Manager?

I'm having several problems after upgrading to SE 3.0.
1. Whenever I need to close SE in the Task manager, there are two SE icons under the Applications tab, is this normal?
2. I had a previous SE installed which was purchased with a USB DAQ device, no more than one year ago. This error came from one of the old project, that used to work. The error occurs while trying to RECORD a waveform using SIGNAL TRIGGER. Using DAQmx acquire and Configured for N SAMPLES, the program locks up showing "Recording" in the PROJECT window. If I look at the log file, it continously logs, instead of stopping at my 1 s duration. This problem resolves when I setup the acquired signal for CONTINUOUS SAMPLES, but it used to work before I upgraded the software. (The software may have been the same version - it was only 1 year old.)
3. Using a project with at least one logged file, SE locks up when I atttemp to go to the PLAYBACK mode. No error message, just an hour glass and PLAYBACK highlighted.
Thanks for your help.

Scott M,
1) In task manager there are two Signal Express icons one should be LabVIEW (more square) and one Signal Express (more round). I am not sure why you are closing signal express via task manager, but if you have to then this is what you are expected to see.
2) When you have N samples set it will take (Samples to Read / Rate) seconds to complete the task. It will then close after completeing that but it will not close mid task. Continous however will simply stop at the time limit you specify.
3) Is it any logged file? How long have you waited? Is this a new pc? Can you post screenshots?
Sincerely,
Jason Daming
Applications Engineer
National Instruments
http://www.ni.com/support

HT4113 I bought a second hand ipod 4 touch my other one just got stolen how do i get this passcode off and set it to factory?

Hi I bought a second hand ipod touch 4th generation it has a passcode on it I have tried to hold the on/off button and the home button for 20 sec but never goes to the plug and cord thing symbal I want to factory reset it my other I pod just got stolen a whole lot nicer one but dang this one was affordable please help thanks

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a toolbar / serch called My Serch by incredamail that domanates the page, how can I get rid of it and get back to firefox opening. Please" ..... Thank you.

I upgraded this mail account but did not take the time to read some of the changes that where not there before. it automaticly incerts it's search engine, it will not go away, that is, it will split the paige ... I like the mail part, but I hate the bar and search engine .... plus all it's advertisments. just want the simple FireFox page. can do all I need from there.

Please provide the exact wording of messages, or of urls without leaving out letters or adding spaces.
try these to see if they match:
How to remove My Start Toolbar From, Firefox. I managed it on IE8 but not Firefox | Firefox Support Forum | Firefox Help
* https://support.mozilla.com/en-US/questions/860323
I deleted the Incredimail toolbar in Add and Remove Programs but it is still there. Please help. | Firefox Support Forum | Firefox Help
*https://support.mozilla.com/en-US/questions/801866
''To fix home page...''
Type '''about:home''' into the location bar, and if that is what you want for a home page then
# Tools ("Alt + T") > Options > General
# When Firefox starts: Show my home Page
# Click on "Restore to default"
You can have any page you want for a home page, if you have another page in mind, see
* https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page

Bookmarks are shown permamently on the left of the screen.How do I get rid of them,so that the screen is not limited. I also do not have "print" oe "file"tabs at the top. I think it is all too complicated.

The Bookmarks are shown permamently down the left had side of the monitor acreen. I cannot find a way of removing them. I usually see the Bookmarks via the Firefox tab at the top left hand of the screen .
You information pages refer to tabs such as "file" ,"print", "view" etc on top , but I do not have these either.
I am afraid that I find this all too complicated

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

There are two folders in the My Music folder dedicated to iTunes music: •My Music AppleReceive and •My Music iTunes iTunes Media Music They share many of the same titles, although some duplicates may be mp3 and m4a. Confusingly, neither for

There are two folders in the My Music folder dedicated to iTunes music:
•My Music > AppleReceive
and
•My Music > iTunes > iTunes Media > Music
They share many of the same titles, although some duplicates may be mp3 and m4a. Confusingly, neither format seems to be exclusive to the AppleReceive or iTunes Media folder.
I'm reluctant to playing the "delete one and see what happens" game.
Any theories/suggestions?

BCHeller wrote:
There are two folders in the My Music folder dedicated to iTunes music:
•My Music > AppleReceive
No idea what this folder is. Sounds like it is something you created & named.
•My Music > iTunes > iTunes Media > Music
This is the default folder iTunes uses for music.

There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
    The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
   SCREEN-INPUT   = 0.
   SCREEN-INVISIBLE = 1.
   MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.

Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil          TYPE filename   MODIF ID unx, " e.g. Unix server
p_pc_fil          TYPE filename   MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
*   transaction(s) for upload from server (AS)
    WHEN 'ZJPVCS303.
      LOOP AT screen.
        IF ( screen-group1 = 'UNX' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
*   transaction(s) for upload from local PC (PC)
    WHEN 'ZJPVCS303_US.
      LOOP AT screen.
        IF ( screen-group1 = 'WND' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
   WHEN others.
   ENDCASE.
Regards
Uwe

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

There are two CDC methods - Source based CDC and Target based CDC which one

There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
If there is any document available which compares both and provides any info on performance etc, will be helpful.
thank you for the helpful info.

LIke Suneer mentioned CDC is for better performance.
Following link would be helpful.
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
Thanks,
Arun

HT4859 I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the

I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the control.
Has anyone else experienced this?

After deleting the backups, go back to Settings>iCloud>Storage & Backup and make sure iCloud Backup is set to On (if not, turn it on).

When you back up your Iphone/Ipad it backs up for camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles and no errors reported.

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.

If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums.
If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

I purchased an audiobook and there are two parts/files to it. I-Tunes is only finding one of the files. How do I get it to find and consolidate the files under one book title?

Similar Messages

Maybe you are looking for