I purchased an iMac 24" with os 10.5.8(iMac model 6.1). How high up the OS chain can I go with this model?

I am trying to find out how high up the OS X chain I can take this unit. I have not been able to find anything solid online. I know I can't go as high as Mountain Lion(this unit is a late 2006 model 6.1, with core2duo processor). Thanks for any help.

First you need to research all the problems people are having with it higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store, so you have to call Apple to buy it, last I heard.

Similar Messages

How high up the OS ladder can I go with a 2007 macbook?

How high up the OS ladder can I go with a 2007 macbook with 10.6.3 OS?

If you have the MacBook from 2007, Snow Leopard might be the highest you can go for OS updates. I believe that 10.6.8 is the last update for Snow Leopard.
If your system is supported (has a Core 2 Duo processor, and 64 bit EFI, ...) then you can upgrade to Lion, and possibly to Mountain Lion. I know that the last time I read the specs for Mountain Lion, my old MacBook Pro 3,1 (late 2007) was the oldest machine officially supported by Mountain Lion.

How high in itunes new versions can I go with 10.39?

I have to stay with 10.39 for my primary software. I have itunes 7.3 installed but it won't recognize my Pioneer DVR-110 burner. When I try to burn a CD itunes says "No burner or disc burning software found."
I noticed in the advanced settings for durning a tiny little caveat about "must have 10.4."
So, what itunes version must I drop back to in order to burn a CD on my G4 running 10.39? And is it stll avalable at Apple.com?
Totast works fine with the Pioneer on this computer.
Thanks,
[email protected]

If you are able to burn CD's from itunes, do you know what brand and firmware version of CD burner you have? You should be able to see those numbers in the system profiler.
Also, what version of itunes are you running?
Thanks,
Steve

I purchased the Brookstone DLP projector for the iPhone, and all the reviews state the iPhone 4S can be mirrored with it. However, I can't not figure out how to do so. Is there a setting to change? Can't figure it out! ARGGG!

I purchased the Brookstone DLP projector for the iPhone, and all the reviews state the iPhone 4S can be mirrored with it. However, I can't not figure out how to do so. Is there a setting to change? Can't figure it out! ARGGG!
It will show pictures and videos if I choose, Start Slideshow, but it won't show anything else, no apps, etc.
Here's a few examples of the reviews which state it mirrors:
http://www.bgr.com/2011/11/07/brookstone-pocket-projector-for-iphone-4-and-4s-re view/
http://www.gadgetaddict.info/brookstone-pocket-projector-for-iphone-4-and-4s-rev iew/
I bought this for video analysis presentations with an app on the phone, so this is a key feature for me.
Any help is appreciated.
Jim

I also have not figured out how to mirrow either. I ask you both, is the sound via the projector louder than the phone itself when projector is tuerned off? No matter what I do the max vilume through the projector speakers is lower that the phone itself even with phone remaining installed in projector. I am think of taking it back to try another one.
Keith

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Every time i open an app it will close with in a few min and wont open at all if music is running in the backround. what can i do about this?

every time i open an app it will close with in a few min and wont open at all if music is running in the backround. what can i do about this?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Olympus xz-1 camera when connected to ipad2 with supplied ubs cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further!

olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem . very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. How do I print just 1 page out of 14 pages . I don't see any settings on my iPod and can't find settings on the printer . Can someone help with this

I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.
How do I print just 1 page out of 14 pages .
I don't see any settings on my iPod and can't find settings on the printer .
Can someone help with this problem

Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

When your username includes a Charakter like "acson te graf" zhere is a Problem for Windows to find your installiert-Files. Yust Build another Username like "Dummy", give admistration rights, change to this user and install iTunes on this accout. Now you can Return to your Old account an use iTunes.
I am still surching how to change the username in Windows but still no idea.

How to export the Apex web page to PDF with click of a button?

How to export the Apex web page to PDF with click of a button?
Am looking at exporting the Form view on APEX to be exported to PDF.

In order to get a PDF, you need to generate a Report....in PDF format.
If you are using the APEX Listener, you can initiate the download of the PDF by calling APEX_UTILS.download_print_document() (I normally place this in a Process)
BUT -- You have to create the Report (under Shared Components) and a Template (also under Shared Components).
The white paper in my first post gives you the HOWTO "[Create] Custom PDF Reports with Oracle Application Express and the APEX Listener".
Start by creating a Report (in Shared Components, bottom right) that uses a simple SQL statement like:
Select * from emp where empno = :P15_EMPNO
You may need to hard code the parameter before you hit "Download XML" button.
The XML that you get from clicking "Download XML" satisfies the "Step 1 - Create an XML Data Source" found on Page 11 of the document.
The rest of the instructions is in that whitepaper.
MK

Is it possible to process audio tracks with compression, eq, etc....in Logic Express, similar to the way you can do it in Protools? If so, how do you do it?

Is it possible to process audio tracks with compression, eq, etc....in Logic Express, similar to the way you can do it in Protools? If so, how do you do it?

Hello,
Yes, add such effects using the insert slots on the track strip.
Click on the slot, choose your plugin from the list. Double click to bring up its control window to set parameters.
Alastair.

How to find the column name and table name with a value

Hi All
How to find the column name and table name with "Value".
For Example i have value named "Srikkanth" This value will be stored in one table and in one column i we dont know the table how to find the table name and column name
Any help is highly appricatable
Thanks & Regards
Srikkanth.M

2 solutions by Michaels (the latter is 11g upwards only)...
michaels> var val varchar2(5)
michaels> exec :val := 'as'
PL/SQL procedure successfully completed.
michaels> select distinct substr (:val, 1, 11) "Searchword",
                substr (table_name, 1, 14) "Table",
                substr (t.column_value.getstringval (), 1, 50) "Column/Value"
           from cols,
                table
                   (xmlsequence
                       (dbms_xmlgen.getxmltype ('select ' || column_name
                                                || ' from ' || table_name
                                                || ' where upper('
                                                || column_name
                                                || ') like upper(''%' || :val
                                                || '%'')'
                                               ).extract ('ROWSET/ROW/*')
                   ) t
--        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
       order by "Table"or
SQL> select table_name,
       column_name,
       :search_string search_string,
       result
from cols,
       xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
       columns result varchar2(10) path '.'
where table_name in ('EMP', 'DEPT')
TABLE_NAME           COLUMN_NAME          SEARCH_STRING        RESULT
DEPT                 DNAME                ES                   RESEARCH
DEPT                 DNAME                ES                   SALES
EMP                  ENAME                ES                   JONES
EMP                  ENAME                ES                   JAMES
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   PRESIDENT
EMP                  JOB                  ES                   SALESMAN
9 rows selected.

How well does the wireless "Wild Charge" pad work with the iPhone?

how well does the wireless "Wild Charge" pad work with the iPhone?

I have tried similar things, and no, it has not become corrupted. So it should be fine

I have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

i have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

sorry all - disregard I've identified the issue in the language settings with one set to 'English - United States' and one to 'English - United Kingdom' - now fixed.
Cheers

I purchased an iMac 24" with os 10.5.8(iMac model 6.1). How high up the OS chain can I go with this model?

Similar Messages

Maybe you are looking for