I purchased Martha Stewart Living for IPad then realized it was free for me if I already received it in the mail. Now I need help in canceling the order and am having trouble finding the best way to do this easily and quickly. Please help.

How can I most easily get refunded for subscribing to Martha Stewart Living on iPad in error?

Normally there are no refunds, but you can try your luck.
You can report issues with your iTunes Store purchases directly through the iTunes Store:
  http://support.apple.com/kb/HT1933

Similar Messages

  • TS1314 I have lots of organized photos on my PC and I want to keep them organized to sync to ipad.... how is the best way to do this?

    I have spent a lot of time saving, organizing and arranging photos (for the last 7 years) on my PC, and would like to know the best way to transfer these, AND MAINTAIN THE ORGANIZATION OF THE FOLDERS, to my new ipad (and later, my iphone). I have a really good system, and I do not want to have to do it all over again, on the ipad. I DO NOT want to subscribe to another monthly service fee (i.e. the iCloud) but DO have iTunes on my PC.
    What is the simplest method to do this ?  I have tried synching, but, each time have lost photos (on my ipad) OR have had NO ORGANIZATION AT ALL to the photos once synced.  I have all these photos (5.6gb) in the My Pictures folder, then subdivided into years, then subdivided into events and months within the years.  So, my transfer of the My Picures folder, completely transfers all of them, but with NO further organization.  Again, I have spent years doing this, and don't want to have to re-invent the wheel. 
    Can someone advise (or even better, lead me to a youtube video) that accurately shows the best way to do this ?
    Thank you, in advance, for your help.
    p.s.  I particularly enjoy Dan Nations very informative articles on how to get the best from my products.  And, wish Apple would explain "how it works" regarding the syncing methods on the Operating System.  It is the only thing I "don't get" about using my iPad..... meanwhile I LOVE my new mini ! ! ! ! ! ! ! thanks Apple, for keeping things simple.... Please don't change that !

    Correct, it will only be one-level, the Photos app doesn't support sub-albums - the sub-folders photos will be included in the parent's album.
    If you select My Pictures at the top of the Photos tab when syncing, then you should get an album for each folder that is directly under it - so if I understand correctly what you described then that would mean an album for 2013, one for 2012 etc. And each of those should include all the photos in the subfolders under it - so 2013 would include the photos from the events and months subfolders under it.
    You can't sync them separately, only the contents of the last sync remains on the iPad, by not including a folder in the next photo sync you are effectively telling iTunes that you no longer want that folder/album on the iPad so it will be removed and be replaced by the contents of the new sync (you can't delete synced photos directly on the iPad, instead they are deleted by not including them in the next sync).
    The app that I use, Photo Manager Pro, allows you to select and copy a folder (via FTP), but you would need to select each subfolder individually, which if you have a lot would be time-consuming (I think that if you select '2013' it would ignore the folders beneath it).

  • Urchased a new desktop pc and I want to move itunes and all files including IPAD apps to my new computer and delete off my old one.  What is the best way to do this?

    I just purchased a new desktop PC and want to move Itunes and all my Ipad Apps to new computer, and delete off my old computer.  What is the best way to do this?

    Hi,
    See Here for Transferring your iTunes Library
    http://support.apple.com/kb/HT4527
    Make sure Everything is working to your satisfaction Before Deleting anything from your old computer...
    Cheers,

  • I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?

    I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?

    Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
    Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
    Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders

  • I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

    I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

    WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

  • Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    Follow the instructions for enabling your iCloud account on the MBAir here >  Apple - iCloud - Learn how to set up iCloud on all your devices.

  • My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    MDM  -- moble device management 
    MDMs
    Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
    For a comparison see this page:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Profile Manager by Apple
    Zenprise
      http://www.zenprise.com/

  • HT1451 I need to move my library from my old computer to my new laptop. What's the best way to do this?

    I need to move my library from my old computer to my new laptop (Windows 8). What's the best way to do this?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

    I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
    From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
    I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

    Install the new drive in the computer.
    Install the old drive in an external USB or Firewire enclosure.
    Boot the computer from the Recovery HD on the external drive.
    Use Disk Utility to partition and format the new internal drive.
    Clone your external drive to the internal drive.
    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the Recovery HD on the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the Recovery HD then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
      1. Open Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your new hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status of
          the drive in DU's status area.  If it does not say "Verified" then the drive
          is failing or has failed and will need replacing.  Otherwise, click on the
          Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions from
          the drop down menu to one. Set the format type to Mac OS Extended
          (Journaled.) Click on the Options button, set the partition scheme to
          GUID  then click on the OK button. Click on the Partition button and
          wait until the process has completed.
      4. Select the volume you just created (this is the sub-entry under the
          drive entry) from the left side list. Click on the Erase tab in the DU main
          window.
      5. Set the format type to Mac OS Extended (Journaled.) Click on the
          Options button, check the button for Zero Data and click on OK to
          return to the Erase window.
      6. Click on the Erase button. The format process can take up to several
          hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
      1. Using Disk Utility still opened.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files.  What's the best way to do this?  Should I connect 2 external HD to my new iMac, one for each account?

    I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files.  What's the best way to do this?  Should I connect 2 external HD to my new iMac, one for each account?

    NeuroBrain wrote:
    Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
    This is a common mistake and I highly advise against it.
    1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
    2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
    3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
    Seriously, have a read,
    Most commonly used backup methods
    it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
    "Plan for the worst and the good will take care of itself" - Donald Trump

  • I want to upgrade my Imac from tiger 10.4.11 to Mac OS 10.6 Snow Leopard. What is the best way to do this.

    I have just purchased an iphone 4 and it needs me to have the latest itunes on my computer.  I have not upgraded by computer for some time and thought this is probably the time to do it. My computer is an imac intel with Tiger 10.4.11. I want to upgrade my Imac from tiger 10.4.11 to Mac OS 10.6 Snow Leopard or higher.  What is the best way to do this?  Appreciate any help as I am out of practice. I used to be an old hand at this, but things have moved on since I didn't upgrade or use my computer as much!

    Catherina wrote:
    ...  What is the best way to do this?
    The best way, really the only way, is to purchase Snow Leopard.
    Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Elsewhere: call the phone number in the Apple Online Store.
    Apple's price is $19.99, £14.00, €18.
    Snow Leopard is not available to download from any legitimate source.
    Once you install Snow Leopard, upgrade iTunes to version 10.7 or the latest, iTunes 11.
    iTunes 10.6.3 is the last version of iTunes to support Mac computers with Mac OS X 10.5.8 with either Intel or PowerPC processors, but since you have an Intel iMac, the best solution is to purchase Snow Leopard. Leopard is no longer available from Apple and prices from aftermarket vendors can be unreasonably high.

  • I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

    In Final Cut Express I have two videos I'd like to merge parts of each video into a final film.  What is the best way to do this in FCE?

    Hi
    I use a slightly different way than Alchroma.
    Same
    • One video on track 1 and the other on Video.track 2
    • Resize to 25% and move one to the left and the other to the right
    Diff
    • I don't use the blade tool
    • I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
    Final
    • Resize to 100% and Center
    Video is done
    Audio - very close to this by changing the level so that best audio will dominate
    • Pen tool here too
    But that's me - the Alchroma way is as good as this or may be better for some
    Yours Bengt W

  • What is the best way to approach this?

    "php 5.3.x + oracle 11g R2 XE 11.2.x.x"
    Hello everyone,
    I'm quite new to oracle (2-4 months) and php(2 weeks).
    I have one query with results that needs to be reused in several parts of my website. I can't seem to find the equivalent of the mysql_data_seek in Oracle. I wanted to reset the cursor/pointer of oci_fetch($result) so that I can scroll the result again.
    So far this are what I have come up:
    A. On first fetch put the the results in a php array and call the array later on.
    B. Do the query again.
    C. Keep on looking for a mysql_data_seek equivalent and fail.
    I'm leaning towards option 'A' but I just wanted to consult the experts.
    Thank you!

    Moved to: What is the best way to approach this? (oci_fetch problem)
    Edited by: m.davide on Oct 23, 2012 2:21 AM
    Edited by: m.davide on Oct 23, 2012 2:22 AM

  • I want to run Quicken through Windows on my macbook pro, whats the best way to do this?

    I want to run Quicken 2012 through Windows on my macbook pro, whats the best way to do this?
    I have been looking at Parallels or VMware in order to use Windows but then I will also need to get a Windows license. Just looking for the most inexpensive way possible as this will probably be the only Windows app I run.
    Also looking at this CrossOver software which says you dont need Windows license. Anyone used this before? had success?

    CrossOver's website has a list of software it has certified as working or working with known issues - Quicken 2012 has a bronze rating meaning it runs but with enough issues that it isn't recommended. In other words, "Run away!"
    Get a copy of Windows 7 OEM from Amazon or New Egg and give it a try with VirtualBox (an open source virtualization program). If VirtualBox doesn't cut it you can always buy VMWare or Parallels.

  • I have Acrobat 9 on a PC I no longer use. I want to download and re-install on a different PC. What is the best way to do this?

    I have Acrobat 9 on a PC I no longer use. I want to download and re-install on a different PC. What is the best way to do this?

    Hi Chaos2015,
    Could you please specify whether you have Acrobat 9 Pro or Standard version.
    You need to deactivate Acrobat from the old machine and then install on the new one from a CD/DVD and then activate with the same serial key.
    If you do not have installation media, then you can download the Pro version from the below mentioned link:
    Download Acrobat products | 9, 8
    Please note that you can activate the software on maximum two computers. For example: Your desktop at work and laptop at home
    Regards,
    Anubha

Maybe you are looking for

  • When trying to update applications, where can you find an account you used to purchase the application?

    The App Store has had the little red notification saying I have two new updates to download, for iPhoto and iMovie, but when I go to download them it says "please log into the account you used to purchase the application." I am not sure which account

  • Approval - view pending items with view page

    Is it possible to view pending items with view page? I know it is possible to view it in graphical mode, but our content manager want's to see the end result. Maybe i'm missing something. (We have portal 9.0.4.1.0 (Build: 129), upgrade to a newer ver

  • Blocking Calls on Spring using Palm Pre

    Somehow, someone programmed my number into MovieFone so it calls me multiple every day and I have no way to stop it.  I have not found any way to contact MovieFone and Sprint says there is no way to block the calls from coming everyday. Does anyone k

  • Backend ODATA channel missing

    Hi, I have installed all the required components for the SAP Netweaver Gateway 2.0 on Solution Manager systme in my landscape. Now as per the process  i need to go to:  In transaction SPRO open the SAP Reference IMG and navigate to: SAP NetWeaver ->

  • Customer Org Contact API

    Hi all I'm trying to create customer org contacts using the API (HZ_PARTY_CONTACT_V2PUB.create_org_contact). I've seen it is possible to insert the basic information for the contact, like: Name (last and first names), Title, Possition, etc... But I h