I purchased version 12 for Windows elements and changed on iMAC computer do I need to buy the full versions of the elements 13

I elements12 versions of Windows but now changed to a mac computer and I can not download the purchased version of how to change or upgarde to the elements 13 for mac

Download versions are for one platform only, but that won't matter if you buy an upgrade. However, if you're in the US later this week you'll almost certainly be able to find the full version for much less than adobe's upgrade price, at big box stores and online retailers.

Similar Messages

I purchased dreamweaver download for windows but now I have a mac, will I need to purchase it again?

Hello, I purchased and downloaded Dreamweaver CS6 for windows, but have now upgraded to a MAC, will I need to purchase the software again ?

You can apply to Adobe for a platform swap
Order product | Platform, language swap

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

TS2753 i have removed iTunes and re-installed the latest version for Windows XP and still can't access the iTunes store; is there any way to get access to the iTunes store again?

I am unable to access the iTunes store for the last two months, I've tried removing the software and re-installing the latest version for Windows XP and still no access; is there a solution that would allow me to get access again?

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

TS1389 I keep getting a message telling me my ipad cannot be synced because my computer is not authorised for items purchased on this i pad. I tunes tells me it is authorised and o have follewed the sugestions for windows 7 and it stil wont sync.

My ipad wont sync when i try to put old apps back on, it tells me my computer is not authorised for purchased items for this ipad. I have followed the steps for windows 7 but it stil wont sync. I tunes tells me the computer is authorised. What can i do?
Cheers pete.

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Just purchased photoshop cs6 for windows and received installation disk.

Just purchased photoshop cs6 for windows and received installation disk. Where do you find the serial number on the disk? What should the serial number start with? The disk was in the original box and I see a number that start with 910.....
The box was in a brown envelope and there is barcode sticker on the back with more numbers. Where should I look for the actual serial number.

http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Hi, anyone can tell me how to open a CD - ROM FOR windows 2000 and XP Version 1.1b Software by Softwire LTD?

Hi, anyone can tell me how to open a CD - ROM FOR windows 2000 and XP Version 1.1b Software by Softwire LTD?

Then you will need a copy of XP running in a virtual machine, or possibly bootcamp depending what Mac OS you're currently on.
Rather expensive way to do it, but if it's Windows software, you need Windows.

My iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8.

my iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8. In parallels, I don't have any problem, just on the Mac platform.

tebasj wrote:
Thanks for your observation. I realize they are different versions, but when I use the "Software Update" menu, this is as far as it would update. Is there some way to update the iMac beyond what "Software Update" does? I've tried it several times.
Please Note.
Upgrading OSX 10.6.8 (Snow Leopard) to 10.8.3 (Mountain Lion) is not an update. It is a paid upgrade. Just as with 10.7 (Lion) you must purchase it from the App Store with yor Apple ID and install it after backing up your current computer state for safety.
Cheers
Pete

I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This will install the version of OS X that originally came with your model if you have a model that supports Internet Recovery - 2010 models and later: Computers that can be upgraded to use OS X Internet Recovery.

Hi, i have adobe elements 12 (downloaded) for windows 7 pc, but want to transfer it to mac (not keeping the pc). how to ?, please.

Hi, i have adobe elements 12 (downloaded) for windows 7 pc, but want to transfer it to mac (not keeping the pc). how to ?, please.

Download the Mac version and use your serial number to acrivate it. As long as your license is mulriplatform it should work.
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

Fingerprint Software 5.8 for Windows XP and Vista (32-bit)

Fingerprint Software 5.8 for Windows XP and Vista (32-bit) points to:.
Version: 5.6.2.3650 Release Date: 2007/09/27 which is OLD!!!!
we ar stiil waiting for new driver? package? .. have lot's of customer which acan not help! to fix their machines?
If you have a woman with smal hands/wingers .. there is no way to make it WORK!!!
When will we see new turbo memory drivers?? Have more than 50 customer/notebooks wit turbo memory diabeld. as it not usable, but they have paid for a product!!!!
Come ON !!
Message Edited by TeMpL on 07-09-2008 07:29 PM

Hi there!
Please see this thread for the download links for the Fingerprint Software 5.8 ....
This issue was already raised in the ThinkVantage subforum here at Lenovo Forums and it is resolved.
Regarding the Turbo Memory, please keep in mind that the hardware only works with Vista. Windows XP does not support turbo memory thus the piece of hardware is rendered useless. With regards to Turbo Memory usage in Vista, the latest drivers do fully support the card in Vista and since there are no technological changes, there is no need for additional or new drivers.
Hope this helps!
Steve
Message Edited by icantux on 07-09-2008 02:28 PM

I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

houseofrest,
According to this page, you can use it for CC:
Adobe Illustrator CC for Mac, Windows, PC - Tech specs
Or you can buy CS6:
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-illustrator.html

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

ITunes for Windows, QuickTime, and Apple Application Support

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
*The relationship between iTunes for Windows and QuickTime for Windows*
Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
*The relationship between iTunes and Apple Application Support*
iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
[Latest iTunes for Windows version|http://www.apple.com/itunes/download>
If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Would like some opinions re: best backup software/external hard drives for windows xp and windows 7

Recently tried to restore a corrupted hard drive with a Toshiba canvio hard drive with NTI Backup Now EZ I purchased in 2010. Was only able to restore a few files, had a very hard time working with the software, even contacted NTI, still not much luck. Am unhappy with the NTI software, and want to know what external hard drives and what software the community has used and would recommend for Windows XP and Windows 7? Thank you so much in advance for your time and opinions.
Solved!
Go to Solution.

It doesn't matter which external drive you use.
Let's talk about backing up the entire drive. Be sure to burn the disc that enables you to restore.
Windows XP does not have a decent image backup built-in. I understand this free one works well.
EaseUS Todo Backup Free
Windows 7 has a decent one.
Learn more about system image backup
Windows 8 contains the same backup. Open "Windows 7 File Recovery" (sdclt.exe).
-Jerry

I purchased version 12 for Windows elements and changed on iMAC computer do I need to buy the full versions of the elements 13

Similar Messages

Maybe you are looking for