I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present
Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.

Similar Messages

I purchased movies on my ipad and then when I synced to my computer they ended up in itunes but are now off the the ipad. How do I get them back onto the ipad. Thx!

I purchased tv shows and ibooks on my ipad and then when I synced with my computer they all ended up on my computer in itunes. They aren't on my ipad anymore. How do I put some of them back on my ipad. Also, I tried to make another purchase on my ipad but it said I didn't have enough room. I just updated my software and before I synced I had a bunch of shows on the pad. I don't understand why it's saying I don't have room especially since it took all my shows off. Thanks!!!

If the shows are in fact still on the pad, they will be found in the videos app, not the music or I tunes app. Look there and see if they are still there.
If you don't see them there, go to the searchlight screen ( farthest left home page) and type in the name of one of the shows. If it is on the pad, hiding somewhere, this will find it.
If they are not there, they should not be using up space.
To get them back onto your pad, plug in and sync again. Make sure you transfer purchases first. Before you sync, take a look at the video tab in your I tunes, and check what you want and don't want synced.

I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.

My Ipad is frozen. I've tried to restore it using Itune, but it asks me to desable find me, but I cannt, cuz it is not working. What to do?

My Ipad is frozen. I've tried to restore it using Itune, but it asks me to desable find me, but I cannt, cuz it is not working. What to do?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1212 my daughter put a password on her ipod and can't remember it, I have tried to restore with i-tunes but it says password protected..how can I fix this? thanks!

my daughter put a password on her ipod touch and now can't remember it...I have tried to restore with i-tunes but it won't work and a window comes up saying that the device is password protected! Can anyone help me fix this? thanks!!

From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock

HT1212 i have an ipad that has a password on it and i dont remember my password i tried to restore it using itunes but its telling me that i need the password is there another way to go about this?

im trying to unlock a friends ipad for her because her step daughter doesnt want to give the password to her how do i go about in restoring it without using the password in order for me to do the process

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My iPad and iPhone4s both state "NOT ENOUGH STORAGE" and can't backup due to not enough iCloud storage available in the cloud. I have sync my phone but I still get the msg - I will sync the iPad as well - both devices receive my mail as well as Acer pc.?

My iPad and iPhone4s both state "NOT ENOUGH STORAGE" and can't backup due to not enough iCloud storage available in the cloud.
I have sync my phone to my pc using itunes, but I still get the msg on the phone - could it be that the ipad and phone both receive the same mail? I did go into Settings - icloud - and shut off Mail on phone - I will sync the iPad as well - both devices receive my mail as well as Acer pc.? thank you -

Not having enough storage in your iCloud account isn't caused by using your iCloud email account on your device. It may be caused by having lots of email in your account though.
Go to Settings>iCloud>Storage & Backup>Manage Storage to see what is taking up the space in your account.

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS

My iphone is disabled and i put it in recovery but it didnt take the passcode off and i dont remember so its just stuck does anyone know what to do

my iphone shows the iphone disabled screen i tried putting it in recovery mode and restoring it but that didnt take the passcode off and i no longer remember it any ideas on what to do?

Hello Iphone disabled,
The following article provides the available options for restoring access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

http://support.apple.com/kb/TS3694#error3194
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My ipod froze and when i tried to restore it it said it was locked with a passcode

My 32gb ipod touch 4 froze and when i tried to restore it on itunes it said "iTunes could not connect to the ipod because it is locked with a passcode.You must enter your passcode on the ipod beore it can be used with iTunes."But i cant enter the passcode if i cant even get passesd the ipod boot logo.
PLEASE HELP ME

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT4137 how do i unlock an ipod but i dont know the passcode

how do i unlock an ipod but i dont know the passcode

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

Similar Messages

Maybe you are looking for