I put my itouch into recovery mode, it told me on my computer that it could not find the hardware it neads for my itouch. somewone please help me

SOMEWON HELP ME I NEED TO FIND THE RIGHT HARDWARE FOR MY Itouch? I put it into recoverymode and this thing poped up on my computer telling me to put in the hardware disk. i dont have a disk. i already have itunes downloaded. did i download my itunes wrong? what do i do ?

Perhaps you should try deleting your iPod's Photo Cache. Sometimes a bit random, but it has been known to work for a # number of users.  About the only suggestion I have though.  See this article for information on where to find your iPod's Photo Cache.
http://support.apple.com/kb/ts1314
B-rock

Similar Messages

  • Could not find the log in SCUL for changes made into user.

    Hi,
    We assigned role to user in prob system in CUA .
    I cannot find who has made those changes into that user.
    I have looked in SCUL but could not find it. I did not find any changes in SUIM.
    Can anybody help me hjow can i find who has added that role.
    Thanks Rajesh
    Edited by: Rajesh Nanda on Apr 1, 2009 12:10 AM

    Hi Rajesh,
    this is the normal behaviour. The user gets changed in the CUA-child system by the user who is used in the RFC-connection form CUA master to cua child. Only in the case you use a trusted/trusting RFC connection, the user who performs the changes in the central system connects also to the child systems. Only in that case you will find the 'real' user as changer in the child system change docs.
    With SAP note # 1079207 new change documents are delivered for the CUA-case. To evaluate that changedocs you can use the new report rsusr100n (Ithink ,that it is still not integrated in SUIM until now, so you have to start it in se38,...)
    b.rgds,
    Bernhard

  • HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
    on the other hand phone is started with a message on screen phone is disabled.

  • HT201263 i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

    i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

    i have the same probelm did u get it solved if yess how ?

  • HT201210 i try to do several times... to recovery my ipad 2 wifi...but it gone off mode..what i must do.. i'm  university student ..i need my ipad for tomorrow lecture..please help me

    i try to do several times... to recovery my ipad 2 wifi...but it gone off mode..what i must do.. i'm  university student ..i need my ipad for tomorrow lecture..please help me

    What version of ios do you have?
    See Texas Mac Man's write up here.
    My iPad won't connect to my home wifi - even though it has previously worked fine.  It says it is unable to connect? - any ideas

  • Could not find the main class JRE 1.6 only with console program into Contro

    Hi,
    I want replace JRE1.5-11 with JRE 1.6.
    Applet is running correctly with JRE 1.6.
    But when i want launching Java program located into "Parameters/Control Panel"
    I have following error message "Could not find the main class JRE 1.6 "
    Regards
    Philippe

    i wouldn't report a nullpointer to sun unless you're fairly confident there's some sort of bug. if main() can't be found it sounds to me like a config issue. if nullpointer, sounds like a code issue. post the code if you want, but i don't think sun will help you debug this.

  • I put my iPad into Recovery Mode and can't get it out of it?

    This probably sounds really silly but i forgot my password for my iPad ( don't the the generation but i think it is the first one that came out with a camera & ios7 (i think)) and put it in recovery mode. i do not know my apple id for the iPad (i have 2 apple accounts) my macbook is on a different account to my iPad and won't connect so i cant
    get it out of recovery mode. i no longer have any other devices that has the iTunes account on either.
    any ideas on how i can get it out of recovery mode or connect to iTunes would really help and please don't suggest go to the apple store, its a pain to get to and a pain to get a time i can go . 
    Many Thanks In Advance x

    Place your device into recovery mode as described here.  You may have to try this more than once to succeed.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    The version of iOS you had before attempting recovery mode does not matter.  Once the recovery successfully completes, you will have the current version (iOS 8.1.3).  You need the current version of iTunes (12.1) on your computer to perform the recovery.  Even if it goes smoothly, the recovery will take a while because it will include a download of iOS 8.1.3 to your computer (and then to your iPad).

  • Is there a reason why the iOS 7 update put my phone into recovery mode?

    I was prompted to update my phone, which I did, and when it finished downloading, I got the "Connect to iTunes" screen, which I thought was odd. The iTunes tells me it was put into recovery mode. Is there any reason as to why this happened?

    Oh no! My iTunes doesn't want to recognize my phone now either.

  • How can i put my ipod into recovery mode i've tried to put it in recovery mode but it won't help me

    i've turned off my ipod and i held the home button and plugged in the USB but nothing happened

    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT201209 Yes my iTunes card code was coded into my new ipad 4 with an email address that I could not verify it on!! I have since reset my iPad AGAIN & now I cannot put the code of iTunes card through on this email!!!!  HELP

    My iTunes card was coded into my new iPad4 with an email that I could not verify my card...my new email will not let me use this code again!!! Please can anyone HELP????

    Contact iTunes Customer Service and request assistance
         Use this Link  >  Apple  Support  iTunes Store  Contact

  • Putting video clips (mov) in to edit work place time line after photos (jpeg) getting error message, the importer reported a generic error. ? please help thanks

    premier elements12, putting video clips (mov) in to edit work place time line after photos (jpeg) error message, the importer reported a generic error. ? please help.

    TINA54
    Thanks for the reply.
    Some general comments...
    Regarding:
    THERE ANY WAY I CAN PUT MULTIPLE RANDUM TRANSITIONS IN TO THE TIME LINE WITH JUST ONE CLICK ? .
    There is no transition choice for random transitions across the Premiere Elements 12 workspace Timeline. But, the Elements Organizer 12/Create Menu/Slideshow and its Slideshow Editor does have that random transition choice. So, one possibilitity would be to create your slideshow in Elements Organizer 12 Slideshow Editor and then move the slideshow into Premiere Elements with the Output of Edit with Premiere Elements Editor command.
    Pending more details of the slideshow you are creating, I think that you would get your best photo quality and overall results staying with Premiere Elements 12 workspace (1080p) project and the transitions randomized manually.
    perhaps applying the default to all (all at the same time),
    using Timeline Menu/Apply Default Transition,
    and then replacing transitions randomly for the random transition look).
    Please let us know if any of that worked for you.
    Thanks.
    ATR

  • I recently put my phone into recovery mode but it showed this "The iPhone can not be restored error(3419)."

    I put my phone into a recovery mode but it showed "The iPhone cannot be restored error (3419)." I want to restore it, but all it shows is a iTunes symbol, and an Apple cord. What do I do?! I'm really frustrated. I aside with that, I tried using TinyUmbrella, but my iPhone wont detect.. Can anyone solve this?!

    Error 1 is a very bad Hardware Error of the Baseband Chip. There is no fix. If you have Warranty or AppleCare Coverage, make Genius Reservation and take iPhone to Apple for resolution.

  • I tried to download iOS7 to my iPhone 4, it put my phone into recovery mode and every time I try to restore it, it says it failed? HELP

    I have an iPhone 4, I tried to download iOS 7 from iTunes tonight. I made sure my iTunes was up to date and everything, and while it was downloading iOS7 my screen went black and the iTunes symbol with the USB cord popped up onto it and in my iTunes tab, it said that it detected an iPhone in recovery mode and to restore/update it. I've tried it twice already, resetting my laptop twice and I don't know what to do someone please help!

    I think this could help. Also, there are links to other posts for a bunch of possible soultions. I'd try this first. http://support.apple.com/kb/HT1808

  • I downloaded the new update but it just put my iphone into recovery mode, which is now stuck

    My phone is stuck in recovery mode after trying to update it with the new software.HELP

    Which iOS version did you try to update from?

  • I just put a DVD into my IMac 27" and it makes noise like it's trying to read the DVD but then ejects it. Can anyone help me? I just ran out of Apple Care.

    Can anyone help me? I just put a DVD into my IMAC 27". It sounds like it's trying to read but then it ejects it. I tried this DVD on another IMAC with not problems. My computer just ran out of Apple Care. Help!

    I took the steps that I read on this forum and now my DVD Player works!

Maybe you are looking for