I put the cd in and nothing comes on the screen
I started to contact someone and when he ask me to tell him what l saw when l looked in My Computer we were cut off. what should I do I don't know what to do next
What are you trying to do? What computer do you have? and which CD are you inserting into your computer.
Similar Messages
-
How can I remove Shutterfly from my App Store sight and it appears on my Newsstand sight also ,I evenbought it to later delete it and I can't get it off
Close the Sam's Club app completely and then reboot your iPad.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Sam's Club app and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.
I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...
In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support -
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Stuck in restart mode -- Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?
You insert the disk and restart while holding down the 'c' key until you see the apple and spinning cog. Is that precisely what you did?
-
HT4150 updated and now there is nothing comes on the screen?
I've updated and after rebooting nothing comes on the screen?
Updates are best done one at a time, in my opinion.
Reinstall with the 10.6 DVD again, and once installed ignore all the other offered updates (deselect them) and only update to 10.6.8. If that sucessfully restarts, then choose the other software updates one by one. That's my update voodoo rule No 1.
Don't use you computer while updates are being done. Just wait. That's my voodoo rule No 2. -
I was just listening to my iPod shuffle and it stopped working. I plugged it into the computer to sync it and it won't sync. The little light don't come on on my nano. I've turned it off and on, pushed the play/pause and nothing. Can anyone help me out here?
How long have you left the iPod to charge? It can take up to 30 minutes before it shows any signs of life. Did you use the instructions in this article to properly reset the Shuffle?
Resetting iPod shuffle
B-rock -
I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?
As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums). -
My Gal tries to face time me and nothing comes through to tell me she is doing this period. She then sends a message to tell me. I then have to FaceTime her back. Can somebody help me with this?
Are you using the correct email address that you told her to FaceTime you at in the settings? In other words, is she using the email address or iPhone number in Settings>FaceTime>You can be reached by FaceTime at on your iPad?
-
I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke offplease i need serius help
Yikes, see if anything here helps...
http://www.ifixit.com/Teardown/Mac-mini-Model-A1283-Teardown/659/1
And on yhe battery clip, do you suppose Super Glue would work? -
Its all the little things I don't like about firefox 4 mainly the layout and the search.I thought my browser would get an upgrade, this is complete downgrade ,I never went with firefox for speed .I went with firefox because i hate toolbars and I loved the fact I could put tpb only in the address bar and go straight to the pirate bay or ww.bbc.co .uk by typing bbc
The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name
Firefox is highly customizable and you may be able to customize it to meet your needs.
If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6
Maybe you are looking for
-
Yesterday I updated my iPod tot 1.1 After that it had that crappie bug with the video's, so I downgraded my iPod. After that I updated it again tot 1.1 Now I have a problem with syncing my iPod (video's only). First I had some series it synced with m
-
Missing subject line in BW Process Chain Messages
Hi Experts! We are using BW3.5 (Support pack 16) process chains. There are a number of process chains and almost every thing is working fine. But 2 process chains, send message without any subject into the email. I did a number of tricks e.g. reactiv
-
Hello All, Is there any size limit for attachment in BPEL PM? I use 10.1.3 ver. I have a requirement of sending a word doc of size 1MB Thanks, Arun
-
hi friends, Can any one explain about actual cost (EK01) and caliculated cost (EK02). where we can use these condition types EK01 and EK02. In which scenario we can use EK01 and which scenario we can use EK02. Explain about Actual cost and
-
RTP Cannot open local data port
Hello, I'm about to learn JMF. So I tried the example code from the sun JMF documentation(example10-1; code is appended). The code compiles without errors but when I run it, I alway get the following error: streams is [Lcom.sun.media.multiplexer.RawB