I question for the people's out there who have the silicone case for the Micro, aka Rhino Sk

I have the silicone case too, aka Rhino skin.
what i was wondering, do you us the black belt clip that comes with it's
the reason i ask is because i used it once just to try it out. it seems like when ever you press down on it so you can clip it to your side, It's like it is putting to much pressure on the micro battery cover. what do you think? do you use you belt clip that came with your silicone case?
also i ended up with some fresh scratches.
do you use your belt clip that came with your rhino case?

Umm, well, I have a silicone case, but it didn't come with a belt clip, unless your talking about the hardcase that came with the micro.
If that's what your'e reffering to, no, I don't do that. I tried putting it in after it was in the silicone case, but once I saw that it didn't fit in directly and that I would have to add pressure, I didn't bother. I keep my Zen Micro in the silicone case, and then I put them in an altoids box. I have some soft cusion thingy on the inside of the lid so that my screen won't scrath, and I drilled a hole on the side of the altoids case for headphone/usb jack.

Similar Messages

  • Is there more people out there who like me didn't like the new FF 4 and went back and reinstalled FF 3.6?

    I updated to the new Firefox 4 but did not like it.
    The Go Back button didn't work at times. No advanced drop-down button to go back, say 10 pages.
    Tabs moved up which I didn't like either. in the end i just went back and reinstalled Firefox 3.6.
    So, I was wondering is it just me or are there a lot more who feel the same way.

    http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

  • Is there anyone out there who has used iTunes Match for a large music collection who actually likes and recommends it?

    I have over 16,000 custom selected songs in my library. It's the most important thing on my computer by far. Before I purchase Match, I would like to know if other users really like it.
    When you purchase Match and all your tunes have been matched or uploaded, what do you do with your current iTunes library?
    It's my understanding that you can stream tunes through your Mac computers but that you have to download them to an iPad, iPod or iPhone if you play the tunes through them, right?
    When iTunes Match matches the tunes, does it put them where you had them prior to the match. I.e., will your library look the same as when you started?

    When you purchase Match and all your tunes have been matched or uploaded, what do you do with your current iTunes library?
    You need do nothing with it. You can keep it on your hard drive to access locally.
    It's my understanding that you can stream tunes through your Mac computers but that you have to download them to an iPad, iPod or iPhone if you play the tunes through them, right?
    Yes, that's correct.
    When iTunes Match matches the tunes, does it put them where you had them prior to the match. I.e., will your library look the same as when you started?
    It presents the library as it was originally on my hard drive, but then I don't have my library's organization customized.
    iCloud- iTunes Match
    iTunes in the Cloud and iTunes Match Availability
    iTunes Store- Troubleshooting iTunes Match
    iTunes- How to add a computer or iOS device to iTunes Match

  • Is there anyone out there who cannot get into their e-mail through your internet providers address on your i-pad?  I keep getting a 100 error code

    Is there anyone out there who have come across a 100 error code by trying to log into their e-mail through their internet provider?     The error code means that you are trying to log in from another country.  Is there something wrong with the settings???Please let me know if there is an answer out there.  thank you
    Michele

    As you can see below, when I right click, I have no such option.  In the User Account Settings, I'm operating as the "System Administrator".
    Any other suggestions?

  • I made a slideshow in I-photo.All folks who have a pc cannot open the show why?

    I created a slideshow in I-photo and have sent it to several friends. All mac users had no problem opening the show , however all folks who have a pc cannot open the slideshow why?

    They need the free download of QuickTime???
    LN

  • Hi, i am having an issue with a basic motion scroll effect.  I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

    Hi, i am having an issue with a basic motion scroll effect.
    I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
    please note, that i am new to muse, this is my first project ever.
    my idea is as following:
    when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
    so…..
    now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
    now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
    now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
    when i am scrolling down the WHOLE logo goes down…. so far so good.
    NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
    so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
    the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
    NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
    SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
    BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
    short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
    but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
    Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
    Thanks so much to everyone who actually reads this post and tries to help…….
    All the best,
    Niki Lapan

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

    Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
    I just used it a week ago, before I did the update and it worked perfectly fine.
    Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
    Thank you!!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The hotkey for Private Browsing ( CTRL Shift P ) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

    Question:
    The hotkey for Private Browsing (<CTRL><Shift> <P>) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

    You can try this extension:
    *Customizable Shortcuts: https://addons.mozilla.org/firefox/addon/customizable-shortcuts/

  • What are the frameworks available out there

    I just want to know what are the frameworks available out there for Desktop application ?

    I want to create a standalone application in Java and I heard that I can make it easier if I follow a framework.
    After having a look at frameworks for Java, it just completely confuse me, as it is very different from frameworks for Flash (which I do most).
    The java framework covers much more stuff than what Flash framework covers (which mainly regulate the way how the SWF communicate with the server and the design of the classes )
    I still wonder what is the definition of framework in Java ? Do I really need one for a standalone application, or I just need to follow the MVC design for my classes ?
    I just need to get it right before I actually work on my program.
    Thanks.

  • I got an 11 inch macbook air for christmas and now i am regretting not getting the 13 inch is there any way i can upgrade to the 13 inch still ?

    i got an 11 inch macbook air for christmas and now i am regretting not getting the 13 inch is there any way i can upgrade to the 13 inch still ?

    okay well another question the track pad on my 11 inch mac got stuck and wouldnt work and i took it to the apple store and had a tech look at it and he said it was working and i got home and it still wouldnt work so i took it back again to another tech and he said the guy before didnt fix it right and he said it was broken and that i needed a new track pad and he said he would replace it but they didnt have any trackpads in the store at the time but he fixed it enough that it barely works but he said i needed to come back to get a new trackpad because he fixed it enough that it would only work for a short period of time, so i went back the other day to another tech and told him and he said that since it still works they wouldnt do anything about it. but it barely works and barely clicks down should they fix it since the one tech told me it will only work for a short time and that if i came back they would replace my trackpad ? i have apple care and i am still under the 1 year warranty.

  • Whats the slowest MAC out there that can run Creative Cloud?

    I was wondering what the slowest MAC out there is that can run Creative Cloud?

    On the new install with a default Logic Project, kernal_task (activity monitor) shows 600% CPU usage when ideling (no audio or midi playing.
    Logic using 600% or total CPU at 600%?
    If it's total CPU usage and not Logic itself.. check for a runaway mdworker routine... caused by a spotlight bug thats been longstanding and never totally fixed... Resolve by stopping the MDworker routine and then exclude all drives from spotlight.. and add back in just the system drive. Wait a couple of hours for spotlight to properly reindex the system drive and then test with Logic to see if CPU usage drops down to normal levels...
    If it's Logic that is using 600% then something very weird is going on that is specific to your system or install as that simply isn't normal behaviour even with using just the internal hardware and CoreAudio.

  • Is anybody out there who knows the steps to set up Logic Express? with an Alesis iO|26 interface

    Is anybody out there who knows the steps to set up Logic Express 9 (scores) with an Alesis iO|26 interface to input notes by playing
    an electric guitar? Thank you for your time and patience.
                                                                                          W.W.

    And i fount this
    PETERSON SONUUS-G2M MIDI-KONVERTER
    ok this one could sendout your guitar sound as a MIDI data but only monophone.
    Thats what i see as a big computation problem ( when you play your simple C7 there are
    at least 10 important parameter that describe your C7 chord; but if you play monophone
    theese small boxes can convert it).
    Have you tried anny MIDI guitar?
    I saw some "usb" guitars transmiting midi signal into
    software synth on some computer.
    http://www.roland.com/products/en/GI-20/
    This one?

  • I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

    I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

    yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
    When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
    I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

  • When using my mac book pro, there's a window that comes up saying to force quit applications. i've done the updates cleaned out computer and have taken it in but it wont stop coming up.

    when using my mac book pro, there's a window that comes up saying to force quit applications. i've done the updates cleaned out computer and have taken it in but it wont stop coming up.  what can i do?

    The force quit window appears when you:
    a) type the key combination <CMD> + <OPT> + <ESC>
    b) you select the menu item " > Force Quit..."

  • My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    Hi cindy,
    If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
    Here's what I mean:
    If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
    However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
    You would need to authorize the computer for each of the new Apple IDs.
    Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
    So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
    The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
    Hope that helps,
    GB

Maybe you are looking for