I re-installed the iOS on my iPod touch while it was connected to my PC and iTunes, then after that, I went to TinyTower and it said "Welcome back sky-something". Well, that's not my username. Can somebody tell me what that was?

Also, my Apple ID was saved as I re-installed the iOS. No password, just the mail, is that normal also?
Sorry, I'm new to this. I don't have my iPod touch for so long yet.
I'd be happy if I get answers.
Thank you guys already and have a great weekend.

Not that I can remember.
At the end it said on iTunes "iPod from MyLastNameHere", and my last name is my computer name.
My backups were always called "iPod from Ella".
So, I guess not?

Similar Messages

  • I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

    I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

    I have the exact problem on my 4s immediately after updating to 6.1.2. Not able to enable the phone wifi at all! Can anyone please help?

  • Cannot re-install the software on my ipod touch. "Unknown error occurred(6)

    Hi,
    I Cannot re-install the software on my ipod touch.
    First time I got the following message: "Unknown error occurred(6).
    The last time I got the following message: "Unknown error occured (1604).
    I am then told to re-install again and the above errors occur again. It this like a never ending loop.
    Can you help.
    Thanks in advance.
    Renoe

    No, you shouldn't lose the stuff on your ipod. If you have synced your ipod recently, itunes would have made a backup file of all of your settings and files on the ipod. This is used when you restore.
    Plug your ipod in and the screen that pops up in itunes will have a button to "restore". This will wipe everything off the ipod, reinstall the firmware and then reload all of your stuff. itunes will use the most recent backup file to reload everything. about halfway through the process, itunes will ask you if you want to restore as a new ipod or use a backup... choose the backup.
    Be patient, it takes a while, but when it's done your ipod should be good as new.

  • I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor.  However I keep order the wrong part.  Can somebody tell me what part I need.

    I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor.  However I keep order the wrong part.  Can somebody tell me what part I need.

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort.
    The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • TA44551 my ipod freezes up can somebody tell me whats wrong?

    my ipod freezes up can somebody tell me whats wrong?

    It could be the result of a number of things, so it is hard to say for sure as to exactly why your iPod has frozen. Could be that a memory leak, or that your iPod simply had to many apps opened up or in your multitasking bar. The possibilities are numerous.
    What really counts here is just getting it resolved.  Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing.  Then another box indicates "Error 7 (Windows error 126).  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing".  Then another box indicates "Error 7 (Windows error 126)".  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Can somebody tell me what region my phone was orig...

    My CODE is "0540905".
    Can somebody tell me what languages were originally on it?

    0540905 is meant for Lebanon (Arabic).
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    You don't have to be "in" Safari for it to cancel logout.
    You have several different Applications open, and any one of them may cancel logout if conditions are just right.
    Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling.

  • My ipod touch says it is connected to wifi, but won't run anything that uses it like safari or itunes, and I don't know how to fix it

    Can anyone help me? my  ipod touch says it is connected to wifi, but it won't run anything that uses wifi like safari or itunes, and I don't know how to fix it

    You didn't indicate if it ever worked.  If it NEVER did, the problem could be caused by a firewall in the router.  For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
    You will need administrative access to the router.  If a firewall is present, turn it off and test the iPod again.  If it works, turn the firewall back on but weaken it a notch and test the iPod again.  Repeat as required.

  • Can somebody tell me what is DAD ?

    Hello !
    can somebody tell me that what is dad and whats the function of it .
    i have installed 9iAS on NT and then created the local db on the same machine. then i installed portal on the same local db . But i want to connect my main 8i db (which is residing on some other machine) with the portal . is it possible by making the new dad or with some other method.
    The reson why i am not installing portal on the main 8i db is because there is already load on that db thats why i installed portal on the machine where i installed 9iAS .
    Is it possible for portal to communicate with main 8i db (remember that portal is on the machine where i am having 9iAS . it is not installed on the machine where iam having my main 8i db).
    I know my question is little confusing but any type of help will be appretiated .
    Regards
    Rajesh
    null

    It is possible to have Portal installed on remote database...if this is what you r asking. U need to configure the dad settings in the Portal.I hope this explains it.

  • Can somebody tell me what happened???

    i just plugged my iphone 4 into my laptop to update some apps, when i was prompted with a new update for the phone itself. naturally, i clicked "update", read through the new/improved features and let the phone do its' thing.
    near the end of the installation process (or at the end of it? idk, i wasn't really looking at the screen), everything stopped and a msg popped up claiming an error had occurred. i clicked "ok", only to have another msg pop up saying that itunes was detecting an iphone in recovery mode and that i had to *RESTORE THE PHONE BEFORE USING IT WITH ITUNES.*
    ok, i get it. something went wrong and it apparently wants to start over from scratch.
    but "I" don't wanna start over from scratch. not for a THIRD **ing time because of apple's screw up. nope, not me. so, can somebody please tell me how to get my phone back to the way it was before ever considering the latest update?

    at this point you cant you have to restore it and I hope that works for you a trip to the nearest apple store may be in order for you if you cant get it restored.. and that means replacement

  • Why can't i download the iOS on my ipod touch?

    Ok well I just bought an iPod and gave my other iPod to my son and im trying to plug the old ipod into a different computer to download songs and games and its saying that the ipod needs an update does anyone know the update i need because i cant find the iOS update on the itunes store

    To update
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

  • HT5254 I have gone through the process for "Malware Removal Tool" and I cannot find a place where to make this tool work? Can somebody tell me?

    First of all, I would like to know how do I know that I have "Flashback Malware" in my computer? - I have decided to install the removla tool just in case, but cannot find anywhere to activate and start the process of cleaning or detecting this malware. Will appreciate some advise on this subject.

    Did you install it via Software Update or did you download the Apple malware installer software? If so, there's nothing for you to do. It's all automatic. There are no programs to run. See:
    Helpful Links Regarding Flashback Trojan
    Visit Thomas Reed's site for insight and help: Mac Malware Guide
    A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started. However, be careful about what you do as new variants of the malware circumvent the efforts of earlier tools.
    Also see Apple's article About Flashback malware.
    Apple has released Java updates for Snow Leopard and Lion users:
    Java for OS X Lion 2012-003; available only for users of Lion with Java installed.
    Java for Mac OS X 10.6 Update 8; available only for users of Snow Leopard.
    Flashback malware removal tool; available only for users of Lion without Java installed.
    Install whichever shows up in Software Update. It removes the malware (if present), updates Java (if present) and tightens up Java settings for the future.  You may download from Apple's web site instead of using Software Update, but it's important to know which one to get, because the other two won't work for you.
    For the truly paranoid see 10 Simple Tips for Boosting The Security Of Your Mac.

  • Hello, when I open i-tunes, I always get following error: -42032???  Can somebody tell me what the problem can be?

    Hello,
    when I open i-tunes on my PC, I always get the message: error - 42032?  Can somebody help me and tell me what is wrong? ( I didn't get it in the beginning...)
    Thank you,
    Jammelou

    Maybe this helps.

Maybe you are looking for