I re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help
i re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help
See Empty/corrupt library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2
Similar Messages
-
can no longer find my music and apps on itunes and when i try to sync it tells me its going to erase all that is in my phone and sync the new itunes which has nothing in it
See Empty/corrupt library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2 -
Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?
You might find useful information in item D1 of Time Machine Troubleshooting.
-
I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.
http://support.apple.com/kb/HT3965
-
All of a sudden my login password won't be accepted can any one help but the weird part is after a few min the computer just turns its self on
This happened to me, too. I couldn't log in to ANY accounts on the machine. Restarted, failure again, restarted again.
Solution: Wait.
After restarting I let the machine sit for a minute. Then it worked!
I ran Onyx and repaired permissions. Big mistake, apparently. Now I have to type my admin password everytime I want to move or save. All my Office docs open as Read-Only. -
Hi all. My charger cable broke up by the computer. I can fix it myself but I can't find anywhere to buy cable. Can any one help?
Replacement MagSafe DC cables are not available. You'll need to work with the pieces you have or buy a new AC adapter (which would be the better choice).
-
My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?
Hi LanaJay84,
If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Regards,
- Brenden -
Can any one help? "Windows cannot repair this computer automatically."
I have a laptop satellite L455-S5000.
And when I try and trun on my computer a black screen comes on that says "windows is loading files..."
and after it loads a window pops up saying "startup repair is checking your computer for problems..."
and after that gets done it says "Windows cannot repair this computer automatically" so I click "Send information about this problem (recommended)" and then I click "finish" then it shuts down. when I try turning it back on it does the same thing over. Please can any one help me fix it? Im really clueless about computers and I have know Idea what is wrong with it, or how to even go about fixing it. thanks._Ashley_
Turn the laptop off, hold down F8, turn the laptop on and let go of F8 when you see the Advanced Boot Options.
In here, choose Repair Your Computer then press enter, follow the prompts, choose System Restore and restore your laptop to a point before the problems started.
If the laptop cant get you there, a system recovery starts the laptop from it's factory state but you loose your programs and files doing that. Holding the "0" beside "9" while you turn the laptop on boots the laptop from its recovery partition if you accept data loss. -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times. -
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am maqsood from Karachi Pakistan
Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-) -
what a crock of crap i tunes is followed instructions to get music off i pod on to new laptop lost 5.2 days of music can any one help please ?
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
-
Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de
Have tried to uninstall and reinstall.Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Maybe you are looking for
-
Routing the call to the same Agent
Hi If the same caller calls within XX hours after talking to an agent and if the same agent is available call should be routed to the same agent as before based on ANI can we do this with UCCX ? PW
-
Adding product cleared the topic and title !!!!
adding product cleared the topic and title !!!! not good i had a big paragraph.
-
X200 CPU reaches 100 celsius degrees. is this normal?
I'm using LenovoThinkVantage Toolbox to do a CPU stress test and and the same time I'm running TPFanControl to monitor the speed of the fan and the temperature of the CPU. When I run the CPU stress test the temperature of the CPU reaches 100 degrees
-
When the protected URL accessed SSO login page is shown.Proper credentials are provided and once submitted we get "Forbidden" error. The URL on the browser is the protected URL. Observations from logs:- 2008-07-24 17:37:31.474 Error 5787:1e99e8 Polic
-
Hello, Can someone plz explain and provide references to how $(....) works below and why we use it. $mycred = Get-Credential $CompName = Read-Host -Prompt "Enter Computer Name" Write-Debug "user name: $($mycred.UserName)" Write-Debug "password: $($my