I really don't get it
Hi,
I have a logical problem, I can't understand what is happening. I have Linksys router (Network A) close to the modem to which I connected an Airport Express AE (Network B) through LAN wire going to my room. I use AE for wireless printing and airplay. If I check internet speed with speedtest.net I have with network A 2.5 Mbps, and with Network B 5.5 Mbps (so far so good).
Now what I don't get. When I want to watch live and free TV channels with internet with network A everything works perfectly and with network B image and sound are having huge problems ... as if the connection is poor. No other apps running or what ever that can decrease network speed.
If I use the same network B to watch same channels through the iPhone - no problems again ... and it's the same app (well one is on computer the other on iPhone). If I watch TV on the computer with other apps - same problem remains (Network A works nicely, Network B unwatchable).
Any idea? Any suggestion? I feel a bit stupid for not getting where's the problem. If it was in the app then why it works perfectly with Network A and if it's the network why it works nicely with iPhone? And if it's combination of two with my computer ...
Thanks in advance,
Ivan
Hi,
I have a logical problem, I can't understand what is happening. I have Linksys router (Network A) close to the modem to which I connected an Airport Express AE (Network B) through LAN wire going to my room. I use AE for wireless printing and airplay. If I check internet speed with speedtest.net I have with network A 2.5 Mbps, and with Network B 5.5 Mbps (so far so good).
Now what I don't get. When I want to watch live and free TV channels with internet with network A everything works perfectly and with network B image and sound are having huge problems ... as if the connection is poor. No other apps running or what ever that can decrease network speed.
If I use the same network B to watch same channels through the iPhone - no problems again ... and it's the same app (well one is on computer the other on iPhone). If I watch TV on the computer with other apps - same problem remains (Network A works nicely, Network B unwatchable).
Any idea? Any suggestion? I feel a bit stupid for not getting where's the problem. If it was in the app then why it works perfectly with Network A and if it's the network why it works nicely with iPhone? And if it's combination of two with my computer ...
Thanks in advance,
Ivan
Similar Messages
-
Nokia's Strategy with Symbian, I really don't get ...
I've tried to let the dust settle a bit since the announcement last week and I've come to the conclusion that I really don't get it.
Now there have been a lot of conversations on these boards about it and I've tried to read as much as I can as I'm interested in what might happen with my N8.
But the more I think about it, the more it doesn't make sense!
Now I should say that I am not one of those who is against the partnership or Nokia and Microsoft, indeed it could be that Nokia's influence on the W7 OS will mean the Nokia devices in the future will be excellent. That remains to be seen.
My problem is with the Symbian side of things. Here's what I see:
The statement says that they want to sell 150m more Symbian devices in the next few years.
So how can they possibly do that without ensuring Symbian can compete with Android, thereby meaning that they have to keep updating it surely? Trying to modernise it.
But how can they do that whilst supporting WP7 as well? Surely the cost of that is massive.
The only way I can see this working is if Symbian and WP7 gradually start to come into line, looking the same and doing the same kind of things which means that Symbian will continue to get good updates.
If there are hundreds of millions of Symbian users out there then strategically it makes no sense to abandon them. Unless you do what I said in my previous statement.
But if you continue to invest in Symbian, what is the point in moving to WP7?
Well there may be some point in it, but the timing and scale of the announcement is ludicrous. By all means say "We are going in partnership with MS and in the next few years we will consider a transition to the windows platform". that works because it implies natural progression to a new OS without abandoning the other one.
So if you continue to invest in Symbian (which i think is the logical approach to keep loyal Nokia users), what happens if it gets good? Starts selling really well?
You have got yourself a stupid award for acting like a kid who thinks he's made a new friend only to realise his old friend was actually much more reliable and it turns out more popular as well.
So I've waffled a bit, but what i'm trying to say is that this is a lose/lose situation Nokia find themselves in. they either:
1) Abandon loyal users, literally millions of them. Lose that business and pretty much might as well give up
Or
2) Continue to support Symbian and make it good and competitive, then why the hell is WP7 their only strategy?
OR, bring the 2 products together so we get used to the UI and functionality gradually so when it comes to getting a new phone, the WP7 OS feels like an old friend. Surely that's it isn't it? Nokia's influence on Windows will actually be greater than the Microsoft influence on Nokia?????? That's the only sensible conclusion I can come to!zaba76 wrote:
I'm not on twitter but apparently twitter is the main way to report issues / get help.
BlackBerryHelp on twitter is one avenue. The best way to get support is by calling your carrier. If they are unable to solve your issue they should transfer you to BlackBerry's support line. -
Don't get the library structure of Aperture
I am trying to manage under a same travel project different albums sorted by country.
So I created a project (World Trip) and I started to import the picture from the first country. I have created a folder (Russia) under which I created different album all related to that country. I have then attached all the pictures in the different albums.
The end result was something like:
World Trip (Project)
- Russia (Folder)
* St Petersburg (Album)
* Moscow (Album)
I was more or less satisfied. But a bit worried that when I click on the project, the browser view is empty (no pictures nor any sub-structures like the list of folder or albums). The folder Russia contained all pictures I had imported from Russia, although before I put them in the albums, they were in the project not the folder. And in the albums I had just the pictures I wanted to see.
My next step was to import the pictures from the next country. So I launched the import of the Mongolian pictures, I have imported them inside the existing project, but I don't see them where I would expect them: under the project.
If you look at the screenshot above. Under the Travelling section, if I click Projects, in the browser view I see my only project and when mouse-hovering it I can see pictures from Russia and Mongolia. But if I double click on this project, the view is empty.
Now if I choose Photos in the Library view, I can see all the photos, cool. The same is true if I click under the Recent section on my project World Trip, there I see all the Russian and Mongolian pictures, which is cool but inconsistent with the other views of my project.
Finally, under the Projects section, when I select the World Trip, it is empty, when I select Russia, it contains only the Russian picture, but I see nowhere the Mongolian pictures, even though I imported them in my World Trip project.
I really don't get it. Even after reading the Aperture manual, it did not explain the behaviour I'm seeing.
If someone could explain me better what are projects and folders, and especially what is a folder within a project and vice versa.
Also, if you know how I could arrange (better) my photos? I would like to have all the pictures sorted by country, but within one main top structure. And under each country, I would have different albums, with subset of pictures, and sometimes pictures could be in more than one albums. How should I structure my library then?
I'm using Aperture 3.4.1.IMO organizational structures that over-use Folders are what I call Folder-think or film-think, and should be avoided in favor of database-think. Try to use keywords and Albums as much as possible in your organizing in lieu of folders. A country, for instance, should simply be a keyword applied to all pix from that country; not a folder.
Organize into Projects first and import one Project at a time; it should only take a couple of minutes to import each Project. Larger Project sizes can slow some computers. Personally I set 500 as my arbitrary maximum number of images in each Project but your mileage will vary. Experiment to see what number of maximum images in a Project may or may not slow your particular setup/workflow down; my guess is that 500-image projects will be fine unless maybe you are shooting a D800 or if there are scan files involved.
Before importing one should:
• Back up the originals before importing into Aperture. This is an absolutely essential step to a safe workflow.
• Decide what keywords to batch-apply to each Project.
From an earlier post of mine on this topic:
Projects should be just that: individual-shoot (i.e. time) based projects rather than some kind of organizing tool for all the architectural photos or whatever. For performance reasons personally I keep each Project under 500 20-MB images, making a second Project if the shoot is large. E.g.
110829_KJones_Wed_A,
110829_KJones_Wed_B,
110829_KJones_Wed_C, etc.
One or more albums will always organize the KJones wedding pix together anyway. All three Projects (110829_KJones_Wed_A, 110829_KJones_Wed_B, 110829_KJones_Wed_C) would have the keyword "KJones_Wed" applied to each pic, which allows an Album "KJones_Wed" to be quickly created at any time.
The way I look at it conceptually:
Aperture is a database (DB), and each image file lives in one and only one Project.
Albums are just collections of Pointers that point to individual image files living in one or more Projects. Since they just contain pointers, albums can be created or deleted at will without affecting image files. Very powerful. And Albums of pointers take up almost zero space, so they are fast and do not make the Library size grow.
Keywords can be applied to every image separately or in batches. Keywords are hugely powerful and largely obviate the need for folders. Not that we should never use folders, just that we should use folders only when useful organizationally - - after first determining that using keywords and albums is not a better approach. Most of the time folders are inappropriately used.
As one example imagine the keyword "flowers." Every image of a 100,000 images Library that has some flowers in it has the keyword flowers. Then say we want to put flowers in an ad, or as background for a show of some kind, or to print pix for a party, or even just to look for an image for some other reason. We can find every flower image in a 100k-image database in 2 seconds, and in another few seconds create an Album called "Flowers" that points to all of those individual images.
Another example is a european train trip. It may be one Project but spans multiple countries in a few hours. No problem, just keyword each pic with the appropriate country and create an album for each country; or another album for some combination of countries (e.g. "Baltic," "Scandinavian," etc.).
Similarly all family pix can have a keyword "family" and all work pix can have a key word "work." Each individual pic may have any number of keywords. Such pic characteristics (work, family, flowers, country, etc.) should not be organized via folders.
So by using keywords and albums we can have instant access to every image everywhere, very cool. And keywords and albums essentially take up no space in the database.
Another (IMO poor) approach would be to use a folder "Family" for family pix, a folder "Flowers" for flowers pix and another folder "Work" for work pix. IMO such folders usage is a very poor approach to using an images database (probably stemming from old paper or film work practices). Note that one cannot put an image with family in a field of flowers at a work picnic in all three folders; but it is easy using keywords.
As an aside note that empirically many users find that even though the Aperture DB can contain hundreds of thousands of image files, no problem, individual Projects should be limited in size for speed reasons. Personally I limit Projects to a maximum of ~400 to ~500 RAW NEF files, but hardware and workflows vary.
HTH
-Allen -
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
i re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help
See Empty/corrupt library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2 -
So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.
If you registered your product, you should be able to find the download and serial number from your Adobe account.
https://www.adobe.com/account.html
Otherwise:
Download Adobe CS5.5 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
You might still have to contact Customer Support to reset your Activations, unless you managed to deactivate the original installation. -
I wasn't looking at what I was doing and I deleted an imessage conversation and I havent figured out how to get it back yet. I have my ipod backed up with itunes but not icloud. It is onlt that one conversation though and I really want to get it back. Is there any way possible to get my conversation back on my ipod?
If it was there and you creaded an iPod backup via iTunes then restore from that backup. Otherwise y are out of luck.
Autosyncing
To help prevent the last backup from being overwritten and thus erasing the Messages from the last backup turn off autosyncing so that you have to overtly start a sync. To turn off go iTunes>Preferences>Devices and check the box that says "Prevent iPods...". -
My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS.My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS. -
I recently downloaded Ios 7 and all the songs that i have purchased before, but deleted off my itunes because i didn't want them, showed up. I don't know how to delete them off my ipod and i really don't want them there. Is there a way to get them off? The songs dont show up in my itunes on my computer, just on my ipod with a download button next to them. I don't want them there anymore because i don't like that kind of music anymore and i don't know how to get them to go away.
There is a similar setting for Videos on that Settings screen, so if you leave that 'on' you may have similar happening in the Videos app
-
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums. I really want to upgrade my ipad as I want to buy and install some apps that are only available from ios5 onwards. I have been a big apple fan but I am now wondering if my ipad2 was a mistake.
If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972 -
I try to log into my Apple ID and it says that it has sent an E-Mail to my Apple ID to vertify that it is me, I understand that but what I don't get is that I can't get onto my account to click open the E-Mail to vertify myself. Any Help?
This is on the Apple ID manage and create page, this has happened to three of my accounts and I seem to get to the same exact spot and it just contradicts itself and won't let me log on at all. I have hooked up two E-mail accounts to the Apple Account and Vertified the accounts through the E-Mails sent to the external E-Mails but it still doesn't let me get into my Apple E-Mail at all.I logged in changed the primary E-Mail address to a different one, vertified it then tried to log in it said either to send an E-Mail to veritify again or to do my security questions, so I choose to do the security questions and put in my Birthday like it asked and it said that it was wrong and I had to authenticate it to get in, why is it so hard to just set up a Apple ID really though!
So I tried the E-Mail to and it has not sent me an E-Mail then I tried to log in again and it has locked me out of my account so I try to recover my password and it gave me the same options to get my password back and both options are doing the same as before, it says I don't know my on birth date or it is wrong or needs authenticate it, then the E-Mail doesn't come through!
This is just stupid now. -
I don't get notifications when I get a call so it ...
Hey
I get the yellow thingy when somene calls but how the hell can I answer when I don't get the pop-up box? So it just closes automatically lol and I have to call back. Always.
So yeah the pop-up box would be REALLY bloody great for me.
Thanks!https://support.skype.com/en/faq/FA3501/what-is-a-status-setting-and-how-do-i-change-it-in-skype-for...
-
I've updated my phone and I've made a backup. but now it says I must enter my code to restore all my files and I haven't got this code. If I cancel the process or choose something else, all my stuff will be deleted, and I really don't want that.
HELP ME PLEASE!!!If, for some reason, your backup got encrypted and you don't know the code, you'll have to set up your phone as new device and start all over again without the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
If you can't get pass the lock screen, connect in recovery mode and restore the phone, you'll have the option to reset the lock secreen passcode.
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.
Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone?
Maybe you are looking for
-
Can I use 2 external displays on new mid 2011 iMac?
I'm thinking of getting the new 27" iMac with the 2GB video card. It lists in the tech specs two thunderbolt ports and a mini display port, but the images only show the two thunderbolt ports, so I assume Apple is counting one of those as being the de
-
Why can i not see the time line and canvas? Also, why am i not able to click on them either?
I am not able to see the time line and canvas in the motion 5. Also i am not able to click on it either
-
Total Compensation Statement Configuration (ESS)
Hello, does anyone know where do I have to go in ERP 2004 to configure "Total Compensation Statement"? I've created a new form in Smart Forms and now I want to change the default form used in the Portal. Thanks a lot Antonio
-
Verizon Employees Actively Discouraging customers from Buying Windows Phones
My wife and I both decided to buy Windows phones this time around. We had previously been Android people but wanted to try something different. We walked into our local corporate store (somewhere in TX) and when we told the salesman what we wanted
-
I accidently renamed image folders in bridge and cannot access the folder images.
I accidently renamed image folders in bridge and can no longer access the folders. Is there a way to get the images back?