I really need help with the Apple Hardware Test!

I have been having problems with the computer freezing. The other night the only way I was able to start it up was to boot off the install disk. My brother being fairly savy with Macs helped me with this. Long story short, I uninstalled and reinstalled all of my non Mac programs. This happened three days ago. Everything seemed fine. Then tonight, same thing. My screen froze, and I shut it down. I couldn't access anything. I zapped the pram, and my user screen came on. When I tried to log in it froze again. Then it started just shutting off on it's own. Everytime I turn on the computer it shuts off. So then I tried holding down the shift key, then by accident, I held down the D key. I thought I remembered my brother doing this. Then the Apple Hardware Test screen came on, so I did the test. It said: A harware error is detected 4HD?11?40000004:SATA(0,0)
What does this mean and what do I do?

SATA would very likely mean your hard drive is failing or has failed. Do you have AppleCare?
~Lyssa

Similar Messages

G5 Full Speed Fans/ The Apple Hardware Tests Error Code

Since yesterday My DP1.8 G5's fans are max speed like jet engine. I tried PMU resets , Disk warrior. But nothing helps. The Apple Hardware Test gave me error code of "post/192/0" . Do you guys know what does this error code mean?
Thank you.

Hi-
Welcome to Discussions!
I think thast the error is related to the "Power On Self Test", or POST. When you start the machine, are there any beeps, or power button LED flashes? If there is a POST error at startup, the power LED would flash in cadence with the beeps..
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Do you have any new RAM installed?

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

Hi I really need help with re-activating my little sisters iPad

Hi
I really need help with re-activating my little sisters iPad, i already set it up a couple of months ago when i bought it,but unfortunately she disabled it by forgetting her password. i followed the necessary steps to reset it again, when the iPad came back on and we put the apple id and password it kept refusing it, i even reset the password, which sent the verification the email account, i followed the steps to reset, But then i noticed the message at the top of the activate screen with the message “this iPad is currently linked to the following apple ID _______ with a a few hidden dashes, but at the end of the email it says co.uk, but the problem is the email ends with .com. I have no idea how this happened, and its driving me insane and my little sister only used her iPad for a month before this happened. for some reason the the iPad email address ends in co.uk when the actual email ends with .com
I also set up the software find my ipad
Please help

You will probably have to contact Apple to see if they can help.
Contact Us

Need help with the Magic Trackpad

I really need help with my Magic Trackpad. I just got it in the mail yesterday and when I was trying to set it up, it's not responding to the "one click." In the TrackPad Settings, I managed to turn off the Secondary Click and just have the Single Click checkbox turned on. How I managed that was double clicking on the bottom right side of the trackpad, but that's if I'm lucky enough for that even to respond. I have also tried to turn off my Mac and turning it back on with the trackpad on hoping it would just turn on the default settings. This is really starting to get frustrated and I know the Magic Trackpad is really cool on fun to use because I used it plenty of times I the Apple Store. Now I do know that all the motion gestures work, the only problem I'm having is the clicking mechanism.

The clicking mechanism is located in the lower left or right corner of the trackpad, for single-click select, or secondary (menu) select, respectively. You can also configure single finger tap to select or double-finger tap for the alternate menu selection. Watch the trackpad preference videos by clicking on each setting text.
Here are my System Preference settings for the Magic Trackpad.
Point & Click
Everything checked but three finger drag.
Secondary click configured to click or tap with two fingers.
Scroll & Zoom
Everything checked
More Gestures
Everything checked but App Exposé

Really need help with MSI R7970-2PMD3GD5/OC:(

Greetings to all,
I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.

Quote from: Svet on 24-August-12, 18:13:26
what PC case you use exactly?
have you tried to open PC case side door and to retest?
Hi,
it's open case. If i close it the temps get even worse:(
They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
П.С. Поздрав Свет
да ли сте ви са наших простора да не куцам на енглеском?

HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with

Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

I need help with the Web Application Certificate

Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.

Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

Need Help with the Clone Tool

I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.

what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

I really need help with the Apple Hardware Test!

Similar Messages

Maybe you are looking for