I REALLY NEED SOME TIPS TO GET SOME GB'S PLEASE!!!!
Please help
If you are referring to your Mac's startup disc getting full,
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!
Similar Messages
-
I really need some serious help with Encore import
Ok I will start off by saying Iam a complete and total newbie to this field. I have produced a few small projects in premier and encore but nothing advanced until now.
Here is what I have done
I am using CS04 Suite
I have built a Premier Project using AVCHD footage that is 2.5 hours long (roughly)
I exported the final project using AME to H.264 so that I could import it into Encore
The files is 16 GB in size
I am trying to import the file as an asset into encore to build the menus, I need to create 2 images in encore, one DVD image and 1 Blueray Image. I am trying to do the DVD image at this time. Encore allows the import, shows the video in the asset list but my hard drive has been running like a fool for 3 hours now, I cant seem to drag it to the timeline, if I right click I cant even access the Transcode setting of the file, my system is very sluggish. It almost seems like it is pre-transcoding but I see no progress bars anywhere.
Is Encore simply still importing the file?
Am I doing this correctly?
Should I break up the video into smaller files? Will I need to create multiple Premier Projectes to do so?
If I wait long enough will it be ok?
I have 6 days to finish this project... I really need your help !!!An external ESATA would do just fine.
Keep all of your media on the external drive. Only use the internal drive for Windows and your applications.
Your quad-core and 4 GB of RAM is OK. Not great (I'd get 2 GB of RAM per core), but OK.
-Jeff -
Need Some Basic Directions, Please
Hi,
New to Nokia and this Ovi Suite. Have 2 brand new 6350's and ready to pull my hair out over the lack of directions for the basics I need to know. I've been all over the Nokia/Ovi site, reading the FAQs and watching the videos and browsing this forum but not finding what I'm looking for.
The directions supplied have you install the software then run it. During that first use of the program you are prompted to choose your connection method (USB for me), then to connect the USB cable to the computer first and then the phone to the cable. Then the phone asks you what method you want to use and to choose the 'PC Suite" method.Then you wait while the program and Windows itself (I am using Win Xp Home) do their things and you get all the pop-ups and info balloons re new hardware detected and drivers and modems, etc.. until finally you get a Windows balloon notifacation showing "ready to use..." and the program shows your phone there in the lower left and all seems well.
OK - but then what????
What is the proper way to end your session?
Do you unplug the phone from the cable and then close the program, or do you close the program first then disconnect the cable from the phone?
Are you supposed to leave the program running in the System Tray or can you click 'Exit" from there to make it close totally so it's not sucking up your resources while not actually in use?
Then next time you want to connect the phone to pc and use the program ... ? Do you connect the phone to the cable first then open the program, or do you open the program first and wait for it to prompt you to connect a phone?
Do you have to screw around each use with connecting/disconnecting the USB cable to the computer each time, or can you leave that end plugged in 24/7? If left plugged in 24/7 does rebooting the computer mess it up?
When ending a session and unplugging the phone from its end of the cable, are you supposed to use the 'Safely Remove Hardware" icon in the Windows System Tray? Is Windows supposed to make a "bing-bong' sound every time you connect or disconnect the phone from the USB cable, or only the very first time when it detects it as new hardware?
I've been having nothing but problems since I got the phones and cable and program (downloaded it form the Nokia website) on Friday and I think that a big part of the problem is that I am not properly starting/ending things as far as the physical connection and THAT is what is not explained anywhere.
Please, please, please, someone, anyone, I really need step-by-step directions on the proper sequence for starting and ending sessions on a regular basis. I may want to connect my phone to PC several times a day but there are no directions on the Nokia/Ovi website for how to do anything past that first initial connection/ setup.
CHey,
These r just my observations only which may give u an idea
Connectivity :- Since i dont hav Nokia 6350, i will try 2 give very generic answer
Once u want to connect ur device with Nokia Ovi Suite using USB, u may get few options(It may differs from one model to other)
PC Suite or Nokia mode
Mass storage or data transfer
Image transfer
Media transfer etc.,
If u r using PC Suite mode which is very common to use for connecting ur device with Nokia Ovi Suite, no need to worry about disconnecting ur session by removing ur usb using Safely remove hardware option. U can unplug once ur session is over with Nokia Ovi Suite
But if u r trying to connect ur device using Mass storage or data transfer mode, ur device will be recongnised by ur pc as a memory stick or pen drive. People wll select this mode if they want 2 transfer huge files to/from PC and phone. Once ur operations are over(copying files, transferring files etc), to end this Mass storage or data transfer session, u hav 2 make sure that ur device will be removed using Safely remove your hardware method, this is because if u r using in Mass storage/data transfer mode, w/o using safely remove hardware method if u remove ur device from pc, chances are high some of ur data may lost or it may be corrupted etc., so its mandotary to use safely remove your hardware, if u r conencting ur device with pc using Data transfer or mass storage option.
It is advisable once ur session is done with Nokia Ovi Suite and ur pc, u close ur nokia ovi suite exit it from task bar. u can unplug ur device from Nokia Ovi Suite(PC) once ur session is over.
Hope its hlps
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution -
Replaced zd8000 motherboard and need some troubleshooting help please............
Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO! -
so i droped my mom's ipad on accedent while walking inside helping carry bags inside... and at fist no one really thought anything of it but we got inside and my stepdad went to check something on it and was like um... something wrong and i guess the fall put it into shock or something but we held down the 2 buttons and it light up but it was black and just with the back light on. And it still wont work so im not sure what to do... I know where the slide to turn it on is so i did that and it made the click noise to signal it was on and i pushed where an app would be and it went to it and made the music to the app... so it works but for some reason the screen is being all stupid... I really need to know if there is a way to fix the screen because if theres not im in a ton of trouble... please help!!!!
I doubt there is you dropped it and broken the screen
try holding the top button and the round button at bottom of screen
hold both until maybe an Apple logo appears if nothing after 20 secs
the iPad is toast
It can be exchanged at an apple store for around $249 to $219 depending on model
Apple do not do repairs
I would own up now before it gets more complicated -
Really need some help here to try and get Fios services in my building
I have been trying to convince my landlord for months to get Fios in the building. Here is a recent email exchange with him. Does anyone know if any of this is true, about the install damages? If it is true, then Verizon needs to get their act together!
Here is the email exchange.
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios? I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference. As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner. On top of that, I can't even watch HD
movies on demand. I've had TWC out here twice in the last four months and
every time they claim nothing is wrong. Its very frustrating. I'll do
almost anything I can to assist in this. Please let me know if you can do
anything.
Thank you as always!james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move. -
Really need some !!HELP!! ALMOST 6 MONTHS WITH OUT BURNING A CD
I've posted before about my problem but but i still have not gotten an answer. This might be my last atempt to get any help before i end up taking my laptop to a repair shop so here we go.
I've recently ran a diagnostic with i tunes and here it is:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
TOSHIBA Satellite A75
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), ASAPIW2K (6.0.2.0), Pfc (2.5.0.204), MxlW2k (1.1.0.120), sscdbhk5 (1.0.0.1), Cdr4_xp (6.2.0.132),
UpperFilters: CDRDRV (6.0.0.0), Cdralw2k (6.2.0.132), GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9000 IGP\ATI MOBILITY RADEON 9000 IGP
IDE\DiskFUJITSUMHU2100AT______________________00000008
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-820S________________1.50___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomVOBID__InstantDrive_CD_14_, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: MATSHITA DVD-RAM UJ-820S, Rev 1.50
Audio CD in drive.
Found 11 songs on CD, playing time 33:12 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:20:15
Track 3, start time 05:07:42
Track 4, start time 06:13:12
Track 5, start time 08:31:30
Track 6, start time 13:17:17
Track 7, start time 17:34:35
Track 8, start time 20:47:57
Track 9, start time 23:22:25
Track 10, start time 25:16:60
Track 11, start time 28:56:22
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 8 12.
The drive DVDRW speeds are: 4 8 12.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
it apears to be something wrong with drive E but in the properties it says its working perfectly.
Every time i try to burn a cd i get the blue screen error.
i hade version 7 of i tunes kept getting the same thing, so i went back to 5.3 but still the same thing. It also happens when i try to burn a cd with nero, i have WMP but don't use it. so now i really hope to get an answer or i have no other choice but to take it to a repair shop. SO !!PLEASE HELP ME!!no problems about the delay.
the 0x8E is reasonably generic. so let's try proceeding on two fronts.
1st front: we'll get a minidump to the Apple Engineers for a look
(the minidump can help identify the driver that seems to be causing the issue here.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
2nd front: checking on a few possibilities ourselves while waiting for feedback on the minidump
(a) device filter conflicts: blue screens with itunes while burning can be caused by device filter conflicts (i've seen 0x8Es before in cases of conflicts with old Roxio products). so perhaps try the techniques from the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters
(b) malware:
malware is a known cause of 0x8Es. try downloading fresh definitions and running vigorous virus and spyware scans. if your security software providers offer them, try running online scans too. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
if your security software providers don't offer online scans, try running the Symantec online virus check. (apologies in advance ... it takes an eternity to complete.)
Symantec Security Check -
REALLY need some help with transparent background
This is really starting to bug me now as I have searched the forums and the web for hours and still cannot get this to work.
I am creating a simple one page site at http://freeselfhelpebooks.org/50ofTheBestPDProducts/
I want the header and footer image to have a transparent background with only the text showing, so that the text shows on the background image.
So far I have created the header image with a transparent background Modify > Canvas > Canvas Colour > Transparent all good so far. I have added some text. Then I save as file type PNG 32, however I still get the background as white as you can see above.
I have tried PNG 8 with alpha transparency, no transparency but to no avail. I have even downloaded Photoshop CS6 and have the same issues. What am I doing wrong here?First of all, your header graphic is fine; it's a transparent PNG. Your footer is a JPEG, which does not support transparency, so you need to resave that file into a different format (like PNG32, or PNG8 w/alpha transparency).
As I was trying to suggest, if you're confused about your graphics, check them in a graphics editor or viewer, not in a web page inside a web browser. Web development is a complex beast, and a lot can go wrong.
In the HTML of your web page, there is a class called "content" being applied to tables and images. This class has a background image being applied to it, which is responsible for the white background on those elements. -
GS60 2PE Hopeless really need some help here!!!
Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_TQuote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right? -
Please post anyhting you can to help me out, I've had this ipod for so long now... and recently itunes has just been being incredibly stupid for me. So here is how it all began, few days ago i connect my ipod... and it auto syncs it, even when that function was turned off... replacing all of my music with the ones in my library ( completely different) k few days later i turn it on again, i got a new HD recently since my old one busted and i redownload itunes v8 and i cant put songs on my ipod. I try and put one on and it automatically puts it in my normal Itunes library, then in the shuffle playlist all you see is this 1 song being duplicated 111 times.... so now this Itunes has deleted over 30 GB of info off my ipod... all movies and songs.. so its completely clean which really makes me angry. I can't fix this.. i dont know what this is.. please help me >< i have already tried reinstalling it, unless there is some sort of function in options to actually get my god dan songs on without them duplicated 100 times and get this ipod working agian please I need help... i've spent all my day trying to fix this.. thanks for your feedback
I know this is a IPod forum
Actually it's not. It's a forum for feedback about Apple's discussions forums, as the title implies. I suggest you post your message again here:
http://discussions.apple.com/forum.jspa?forumID=800 -
Fried RAM slot? Really need some help quick.
Hi guys. I have a major problem on my hands, that I hope you may be able to help me solve...
I have been working on a deadline for the production of a DVD that will be used as part of a mental health outreach program, and all had seemingly been going well, albeit slow with my OEM 512MB of RAM. I therefore decided to upgrade my RAM, first buying two 512MB DIMMS from macsolutuons, but these DIMMS produced crashes almost religiously after 5 or so minutes of uptime. After receiving a new shipment, ensuring they were from the same batch, all seemed to be well. The computer stayed up for days without crash - but when I put a load on it, namely video encoding to DV stream and to MPEG-2, poof - hard crashes.
I decided the RAM from macsolutions looked generic and suspected if I bought some real RAM I'd be safe. I purchased Viking RAM form macmall, three 512MB DIMMS, overnighted so I can make this deadline.
Here's the catch...
If I use all three DIMMS, the computer crashes in less than 5 minutes of uptime religiously. If I use two of them, the computer seems to stay up without problems, but when it sees a load like video conversion places on the system, it locks up. When I remove all RAM, so only one 512MB DIMM is present, I can encode video, and I don't seem to get crashes.
When I bought the machine from Apple some two years ago, it came with one 512MB DIMM. I'm only hypothesizing here, but is there a chance that I received a machine that has a RAM slot 1 that's fine, but there's something wrong with slot 2 (or even 2, 3, 4)? In theory, when just surfing or using standard apps, the first slot meets the RAM need, but when more RAM allocation is needed under hard processes, and the system feeds off of slots beyond #1, then I crash. MenuMeters is installed so I can monitor RAM use, and sure enough, I mainly get crashes as my used RAM approaches 480-500MB.
It's really urgent that I get to the bottom of this issue sooner than later, so I can finish this project to meet my deadline. Assuming slot 2 and so forth are bad, could I use a single 1GB DIMM module?
Any advice is greatly appreciated. If i can repay the favor in any way, I'd be glad to.I suspected the RAM as well, however when I use only one DIMM I get zero crashes. I have used each of the three DIMMS for one day each now, and no crashes, but the second I add another ino the configuration crashes occur. While I agree that cheap RAM is often the culprit, to me all signs point to a faulty slot 2.
I think I'll try getting a 1G RAM DIMM and only use slot 1 and see how that goes. Too bad, because I could really use more than 1G. -
Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones
Hello,
I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6. I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio. It's as if no audio is going back and forth. When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.8.1 192.168.8.19
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
multilink bundle-name authenticated
isdn switch-type primary-ni
crypto pki server cme_root
database level complete
grant auto
lifetime certificate 7305
lifetime ca-certificate 7305
crypto pki token default removal timeout 0
crypto pki trustpoint cme_root
enrollment url http://192.168.8.1:80
revocation-check none
rsakeypair cme_root
crypto pki trustpoint cme_cert
enrollment url http://192.168.8.1:80
revocation-check none
crypto pki trustpoint TP-self-signed-2736782807
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2736782807
revocation-check none
rsakeypair TP-self-signed-2736782807
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
vpn-group 1
vpn-gateway 1 https://66.111.111.111/SSLVPNphone
vpn-trustpoint 1 trustpoint cme_cert leaf
vpn-profile 1
host-id-check disable
voice class codec 1
codec preference 1 g711ulaw
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice translation-rule 1
rule 1 /9400/ /502/
rule 2 /9405/ /215/
rule 3 /9410/ /500/
voice translation-rule 2
rule 1 /.*/ /541999999/
voice translation-rule 100
rule 1 /^9/ // type any unknown plan any isdn
voice translation-profile Inbound_Calls_To_CUE
translate called 1
voice translation-profile InternationalType
translate called 100
voice translation-profile Local-CLID
translate calling 2
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module sm 1
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-12,24
class-map type inspect match-any sslvpn
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-all router-access
match access-group name router-access
policy-map type inspect firewall-policy
class type inspect sslvpn
inspect
class class-default
drop
policy-map type inspect outside-to-router-policy
class type inspect router-access
inspect
class class-default
drop
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
service-policy type inspect firewall-policy
zone-pair security untrusted-to-trusted source internet destination trusted
service-policy type inspect outside-to-router-policy
interface Loopback0
ip address 192.168.17.1 255.255.248.0
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
zone-member security internet
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0
zone-member security trusted
ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
tftp-server flash:apps31.9-3-1ES26.sbn
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/1
associate ccm 1 priority 1
associate profile 1 register CME-CONF
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 4
associate application SCCP
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 10 pots
description Incoming Calls To AA
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
dial-peer voice 20 pots
description local 10 digit dialing
translation-profile outgoing Local-CLID
destination-pattern 9[2-9].........
incoming called-number .
port 0/0/0:23
forward-digits 10
dial-peer voice 30 pots
description long distance dialing
translation-profile outgoing Local-CLID
destination-pattern 91..........
incoming called-number .
port 0/0/0:23
forward-digits 11
dial-peer voice 40 pots
description 911
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 45 pots
description 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
dial-peer voice 50 pots
description international dialing
translation-profile outgoing InternationalType
destination-pattern 9T
incoming called-number .
port 0/0/0:23
dial-peer voice 650 pots
huntstop
destination-pattern 650
fax rate disable
port 0/3/0
gatekeeper
shutdown
telephony-service
protocol mode ipv4
sdspfarm units 5
sdspfarm tag 1 CME-CONF
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-3-1SR4-1S.loads
load 7936 cmterm_7936.3-3-21-0.bin
load 7942 SCCP42.9-3-1SR4-1S.loads
load 7962 SCCP42.9-4-2-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
softkeys connected Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
button-layout 7931 2
ephone-template 2
softkeys idle Dnd Gpickup Pickup Mobility
softkeys connected Hold Park Confrn Mobility Trnsfer TrnsfVM
button-layout 7931 2
ephone-dn 1 dual-line
number 200
label Lisa
name Lisa Ziomkowsky
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 2 dual-line
number 201
label Dylan
name Dylan Elmer
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 3 dual-line
number 202
label Kimberly
name Kimberly Krueger
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 4 dual-line
number 203
label Randy
name Randy Buresh
mobility
snr calling-number local
snr 915035042317 delay 5 timeout 15 cfwd-noan 500
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 5 dual-line
number 204
label Mark
name Mark McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 6 dual-line
number 205
label Susan
name Susan Sundin
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 7 dual-line
number 206
label Rebecca
name Rebecca Vaught
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 8 dual-line
number 207
label Ronnda
name Ronnda Daniels
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 9 dual-line
number 208
label Matthew
name Matthew Creswell
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 10 dual-line
number 209
label Nate
name Nate Couture
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 11 dual-line
number 210
label Sarah
name Sarah Smith
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 12 dual-line
number 211
label Janis
name Janis McFerren
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 13 dual-line
number 212
label Val
name Val McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 14 dual-line
number 213
label Shorty
name Arlene Haugen
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 15 dual-line
number 214
label Ruta
name Ruta Wells
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 16 dual-line
number 215
label 5415489405
name OWH Sales
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 17 dual-line
number 216
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 18 dual-line
number 217
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 19 dual-line
number 218
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 20 dual-line
number 219
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 21 dual-line
number 220
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 22 dual-line
number 221
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 23 dual-line
number 222
label Pam
name Pam Buresh
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 24 dual-line
number 223
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 25 dual-line
number 224
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 26 dual-line
number 225
label Elaine
name Elaine Mahan
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 27 octo-line
number 250
label Shipping
name Shipping
ephone-dn 28 dual-line
number 251
label Eli
name Eli Nourse
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 29 dual-line
number 252
ephone-dn 30 dual-line
number 253
ephone-dn 31 octo-line
number 100
label Customer Service
name Customer Service
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 32 octo-line
number 101
label Sales
name Sales
call-forward busy 214
call-forward noan 214 timeout 12
ephone-dn 33 dual-line
number 260
label Conference Room
name Conference Room
call-forward busy 100
call-forward noan 100 timeout 12
ephone-dn 100
number 300
park-slot timeout 20 limit 2 recall
description Park Slot For All Company
ephone-dn 101
number 301
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 102
number 302
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 103
number 700
name All Company Paging
paging ip 239.1.1.10 port 2000
ephone-dn 104
number 8000...
mwi on
ephone-dn 105
number 8001...
mwi off
ephone-dn 106 octo-line
number A00
description ad-hoc conferencing
conference ad-hoc
ephone-dn 107 octo-line
number A01
description ad-hoc conferencing
conference ad-hoc
ephone-dn 108 octo-line
number A02
description ad-hoc conferencing
conference ad-hoc
ephone 1
device-security-mode none
mac-address 001F.CA34.88AE
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:2 2:31
ephone 2
device-security-mode none
mac-address 001F.CA34.8A03
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:12
ephone 3
device-security-mode none
mac-address 001F.CA34.898B
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 4
device-security-mode none
mac-address 001F.CA34.893F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 5
device-security-mode none
mac-address 001F.CA34.8A71
ephone-template 1
max-calls-per-button 2
username "susan"
paging-dn 103
type 7931
button 1:6
ephone 6
device-security-mode none
mac-address 001F.CA34.8871
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:7 2:31 3:32
ephone 7
device-security-mode none
mac-address 001F.CA34.8998
ephone-template 1
max-calls-per-button 2
username "matthew"
paging-dn 103
type 7931
button 1:9
ephone 8
device-security-mode none
mac-address 001F.CA36.8787
ephone-template 1
max-calls-per-button 2
username "nate"
paging-dn 103
type 7931
button 1:10
ephone 9
device-security-mode none
mac-address 001F.CA34.8805
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:5
ephone 10
device-security-mode none
mac-address 001F.CA34.880C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:14
ephone 11
device-security-mode none
mac-address 001F.CA34.8935
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:3
ephone 12
device-security-mode none
mac-address 001F.CA34.8995
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:8 2:31
ephone 13
device-security-mode none
mac-address 0021.5504.1796
ephone-template 2
max-calls-per-button 2
paging-dn 103
type 7931
button 1:4
ephone 14
device-security-mode none
mac-address 001F.CA34.88F7
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:23
ephone 15
device-security-mode none
mac-address 001F.CA34.8894
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:26
ephone 16
device-security-mode none
mac-address 001F.CA34.8869
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:28 2:27
ephone 17
device-security-mode none
mac-address 001F.CA34.885F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:11
ephone 18
device-security-mode none
mac-address 001F.CA34.893C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 19
device-security-mode none
mac-address 001F.CA34.8873
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 20
device-security-mode none
mac-address A456.3040.B7DD
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:13
ephone 21
device-security-mode none
mac-address A456.30BA.5474
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:15 2:16 3:32
ephone 22
device-security-mode none
mac-address A456.3040.B72E
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:1
ephone 23
device-security-mode none
mac-address 00E0.75F3.D1D9
paging-dn 103
type 7936
button 1:33
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 216.228.192.69
webvpn gateway sslvpn_gw
ip address 66.111.111.111 port 443
ssl encryption 3des-sha1 aes-sha1
ssl trustpoint cme_cert
inservice
webvpn context sslvpn_context
ssl encryption 3des-sha1 aes-sha1
ssl authenticate verify all
policy group SSLVPNphone
functions svc-enabled
hide-url-bar
svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
svc default-domain "bendbroadband.com"
virtual-template 1
default-group-policy SSLVPNphone
gateway sslvpn_gw domain SSLVPNphone
authentication certificate
ca trustpoint cme_root
inservice
endI think your ACL could be the culprit.
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly. If they work fine then we know that we need to open som ports there.
Please remember to select a correct answer and rate helpful posts -
REALLY need some help with my problem (Netgear and...
Hi everyone,
Well... where to start really.
This morning around 5am, I lost connection to the net, yet my Netgear (DG834 wired) showed an uptime of 117 hours, so it showed no reboot. It seems my IP profile was raised (As it was low before for my sync).
I had no reboot it seems, but my noise margin went up to 9db from 6db. This is fine as it means I should be getting around 6.5meg IP profile going by the sync. Anyway (This is complicated to explain but bear with me).
My current IP profile is now 7.15K. I know this will come down now to match my sync at 9db (Which should be 6.5meg).
What is happening, is that any change made to my broadband (Like my IP profile being raised this morning) means that I cannot then connect to the net, and anything connected (Like Xbox Live etc) disconnects, even though the router shows no disconnect, and all the lights are green.
The only way for me to reconnect to the internet then is to MANUALLY reboot the router, because no matter what website etc I try to view, it just says "Looking for..." in the bottom left corner of the browser, and I can't connect to anything like Xbox Live etc.
Can anyone explain why this is happening with the Netgear router? Shouldn't any change, like an IP profile increase not affect my broadband connection? It seems whenever a change is made BT side, I have to then manually reboot the router to get online.
I wondered if anyone with a netgear, or anyone with some knowledge on this could tell me why. This could save me a lot of headaches down the line and stop me having noise margin raised etc because I have to manually reboot the router to get it working again. I just thought that any change, like an increase in IP profile etc, shouldn't affect my connnection and force me to have to manually reboot the router to get it up and running again.
I hope you understood what I was trying to explain, and thanks in advance for any responses.Hi John. Thanks for responding.
I have been through the options on the router and can't find one that says auto connect at all.
It seems the router is not disconnecting though (Like this morning when the IP profile raised), as the uptime on both WAN and LAN were showing 117 hours, and all green lights were on, on the router. It's just when a change on the BT side is made, it won't let me get on the net until I do a manual reboot. It's all very baffling to me really.
I tried googling my problem to no avail also. -
Error 4261 - really need some help from one of you pros!
I keep getting error 4261 when I try to burn CDs. I was able to do it for awhile just fine and suddently I can't anymore. Each time I try now I get partway through burning and it stops, the disk is ejected, and I get error 4261.
Here's what I have tried so far with no luck:
1. Decreased burn speed to 2x, on both iTunes and my CD burner
2. Turned off my virus scanning software (Live One)
3. Tried various makes of disks
4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
5. Updated to latest version of iTunes (7.3)
6. Tried going back to version 7.2
7. Ran diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 13 songs on CD, playing time 56:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:20:25
Track 3, start time 09:03:00
Track 4, start time 12:43:17
Track 5, start time 16:09:07
Track 6, start time 20:03:02
Track 7, start time 24:53:57
Track 8, start time 29:09:72
Track 9, start time 33:22:52
Track 10, start time 38:01:52
Track 11, start time 42:28:17
Track 12, start time 47:01:25
Track 13, start time 52:02:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
Any suggestions???There are a few points of interest on your Drivers and downloads page at Dell.
Dimension 5150/E510 (XP)
Check to see if the firmware on your HLDS GWA-4164B HH 16X DVD+/-RW is up to date. (That's the drive itunes is identifying as an HL-DT-ST.) at least one of the Dell firmware revisions to that was urgent and related to reading and writing to media.
Also,
Check to see if the Chipset drivers for your Intel Chipset are up to date.
Check to see if your Dell Dimension System BIOS is up to date.
Check to see if the video adapter driver for your ATI Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE is up to date.
Once you're satisfied you're up to date, do you still get the 4261? -
I am having trouble trying to delete Quick Times off of my computer. Everytime I go to control panel, add/remove programs, it will not let me do anything. I need help! I need to know how to go about fixing that problem and how to get it off my computer!!! If you can help at all please!!!!! I just need to delete the program and even when i try to open it up it will not let me, it keeps giving me some error message! Help me if you can!
thank you! ok I am sorry that I am slow when it comes to computer porblems, but I installed the cleanup program and need help what to do next. I wne back and tried to delete the program and still the same problem. if you can help it would be great! thanks and have a great night, go bears!
Maybe you are looking for
-
How do i use an alredy open HTTP connection belong to aother class
When my apps logs in the User by checking that the username and password are correct against the server then there has been a connection opened to perform this task. Then the user is returned to the Main Menu. After that they can send some data to th
-
Is there a way to play multiple episodes in Netflix App
Is there a way to play continuos episodes in Netflix with the Apple Tv App?
-
I have iTunes 10 on Mac OS 10.6. My iphone isn't showing up in iTunes. Help!
-
How can I see content on web sites that require adobe flash player?
We installed a web tv from our clinic but it requires adobe flash player, how can I see this stuff?
-
Hi All iam new to SAP HR functional . kindly provide me with the documentation ir any study material. thanks jyothi.R